Büchi B-480

13 x GW INSTEK GDS-1022 Digital Storage Oscilloscopes with Probes These units were removed from a un (more)iversity lab where they were surplus to requirements. The units are in good condition with minimal wear. All units have been powered on, and each comes with the appropriate GTP-060A-4 Voltage Probe. Includes - 14 x GTP-060A-4 Voltage Probe Specifications:- Line Voltage Range: AC 100-240V - Frequency: 50-60Hz - Fuse Rating: T1A 250V - Power Max: 18W 40VA

This was removed from a university lab where it was surplus to requirements. All units are in good u (more)sed cosmetic condition but they do have various signs of general use. The system consists of: 1 x Bio-Rad Radiance 2000 Laser Scanning System.1 x Bio-Rad Motorised Focus Unit.1 x Bio-Rad Optical Unit. All of the rubber on the wheels of the Radiance has broken off. The wheels do still roll though. The Bio-Rad Radiance 2000 powers up fine, but was not tested any further.

Specac Silver Gate Evolution Single ATR Spectroscope Accessories Lab This item was removed from a un (more)iversity where it was surplus to requirement. It is in good cosmetic condition and good mechanical order, we are unable to test it further at our facility. Faults:The mirrors in the unit need cleaning; they are removable and adjustable. Two of the top plate assemblies with part number J have stickers stating they are poor quality. Also included are the following: 3 x ZnSe flat crystal top plate assemblies Part No. 10683-1 Part Nos. J 21967 J 21966 M27867 1 x Bottom plate with prism 1 x Concave pellet anvil Part No. GS10532 2 x User Manuals 2 x Spare "O" rings to hold anvil in place 1 x Volatiles cover Part No. GS10503 2 x Bellows to connect unit to infrared spectrometer 1 x Glass prism marked calcium and fluoride prism DRGN2 18328 1 x Storage and transport hard case

Ultramicrotomo Leica UCT 125. Manufacturing machine knives, table vibration, glass for the manufactu (more)re of blades, and support to make knives. Manual included in attachment. Specifications: - The ultramicrotomo is an instrument commonly used to prepare samples for TEM. Use a glass knife or diamond for cutting ultra-thin sections of specimens included epoxy. - The sections are approximately 60 to 100 nanometers in thickness and 0.5 to 3 mm in width. Were mounted on grids TEM for viewing. - The ultramicrotomo is also used to create a surface mirror-smooth on samples mounted in epoxy, applications for which include images secundariias in the SEM and nanoindexación.

Biomerieux 29551 PREVI Color GRAM Gram Coloration Staining Console with side reagent Tray In very g (more)ood condition

Heidolph Outlet instrument*. 12 months warranty. *Heidolph Outlet instrument can be overstocked item (more), returns, demo instrument etc. They are checked by Heidolph and in a 100% functional condition. Profit from great savings thanks to slight optical defects. Can be used with Heidolph rotational evaporators Hei-VAP Expert Control / Hei-VAP Ultimate Control Features: - Even if the gas ballast valve is open an excellent ultimate vacuum is reached when working with easily condensable vapors. - Distilling high boiling point solvents such as DMF or DMS at low bath temperatures possible. Technical Data:

High speed microplate stirrers Reliable new product from Ohaus. Simple and easy to use with dual dis (more)plays for time and speed. The High Speed ​​Microplate Shaker offers variable high speed stirring from 600 to 2,500 rpm, pulse function, 1 second to 160 hour timer and RS232 communication. - Sturdy adjustable plate: you can attach up to 48 microplates, 6 deep wells or small tubes less than 12.7 cm high, for a maximum weight of 3.2kg - Programmable pulse function: allows you to adjust the pulse sending times from 1 to 59 seconds; useful for samples that are difficult to mix, or to avoid overheating of the samples during stirring - Independent LEDs and control touchpad for speed and time Applications Cell lysis, emulsions, microplate mixing Display Independent LED displays for speed and time Communication RS-232 Structure Die-cast aluminium Construction features The programmable pulse function allows you to adjust the pulse sending times from 1 to 59 seconds. You can program the countdown timer from the set time, and the unit turns off when the timer reaches zero, or you can opt for continuous mode operation, where the timer counts the accumulated time until the user turns off the unit.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 mass standard: flat polygonal sheet Nominal value: 20 mg Material: nickel silver F1 Class Mass Standards – Key Features Highest Precision and Accuracy - F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions - An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards - The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials - F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Application 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

S+B Plinth Cabinet high RT White 600