Thermo Scientific Cytomat Microplate Hotel Stacker Lab

This listing is for 1 of 3 Serosep EntericBio Workstation.The unit is in full working condition and  (more)is ready for immediate release.The EntericBio Workstation is an automated system designed to set up reactions for the EntericBio PCR testing system.Key Features and Benefits:Automation and Efficiency: The workstation automates the transfer of processed samples directly into lyophilized reaction wells, significantly reducing hands-on time for lab personnel. This automation allows staff to focus on other critical tasks while enhancing workflow efficiency.Direct Detection: One of the most notable features is its ability to detect target DNA and RNA directly from stool specimens, eliminating the need for commercial nucleic acid extraction or purification. This streamlining of the process not only saves time but also minimizes sample handling.Flexibility: The EntericBio Workstation offers a comprehensive modular menu capable of testing for a wide array of gastrointestinal pathogens, including bacteria, parasites, CPE, and viruses, all within the same workflow. For example, it can simultaneously identify pathogens such as Salmonella and Norovirus in a single run.Speed: The system is designed to process up to 46 specimens per run, delivering results in less than 3 hours. Additionally, it can perform consecutive runs every hour, making it ideal for laboratories with high sample volumes.Accuracy: The EntericBio system boasts a remarkable mean time before failure of over 50 months and a specimen inhibition/failure rate of less than 2%, ensuring reliable results for laboratory testing.Environmental Benefits: By reducing clinical waste by 88% and consumable storage needs by up to 85% compared to traditional microbiology methods, the EntericBio Workstation contributes to more sustainable laboratory practices.User-Friendly: Designed for all levels of staff, even those without previous molecular experience can operate the system thanks to its automated interpretation analysis software tailored for specific test kits. This feature enhances accessibility and reduces training time.Modular Footprint: With its small and modular design, the EntericBio Workstation can be flexibly placed in various laboratory settings, allowing for efficient use of space without compromising functionality.

This CTC Analytics Leap HTC PAL Autosampler HPLC was removed from a university lab where it was surp (more)lus to requirements. All units are in good cosmetic condition and powered up. We are unable to test the system further at our facility. Autosampler consists of:Autosampler main unit MXY 01-01BSerial No. 113399 Power supply unit MN01-00 Injector unit MZ01-00DSerial No. 980 Control key pad/screen MB 01-00A 2 x pumps MV 02-01ASerial Nos. 2961, 2963 Sample tray 3 drawer storage MP 02-00B Needle wash unitBottle shelf

This Beckman Coulter TQ-Prep Model 2428 was removed from a university lab where it was surplus to re (more)quirements. The unit is in good cosmetic condition but has some minor marks from use. It powers up, but we are unable to test it further at our facility.

Hewlett Packard Series 6890 GC System with HP 6890 Series Injector This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and the oven works.  It is in good cosmetic condition with minor marks. Accessories 1 x N930-1358 1 x N930-1357 1 x Fused Silica Tube TSP020090 Micromass part - 6028621 1x Merlin Microseal septum replacement Part Number - 310 1 x  Restek Premium non-stick w/Center Guide 50 pack 48 left item No - 27090 GC Liner for HP S/SL 1-Taper w/Wool Part number - AG0-4680 Lot no - P01-C6616 1 x Restek Drilled Cyclo Uniliner Hole near top 4.0mmx6.3x78.5 for Agilent GCs Lot - 824835C Cat - 22980 Supelco Capillary Splitter HP-5890 Packed

This Beckman Coulter BIOMEK FX Automated Liquid Handling System was removed from a university lab wh (more)ere it was surplus to requirements. The system is in full working order and was used until very recently. Included in the system are; The system units are in good cosmetic condition. The system consists of the following units: Biomek FX robotic liquid handlerSerial No. 501258024 plate position bedFitted with light curtain, two robotic heads, tip changer, Variomag Teleshake Biomek FX Device ControllerSerial No. 4000A51063 Thermo Electron Microplate HotelSerial No. 40578218With 9 x Cytomat P23 towers and 2 x Cytomat P69 towers Cole Parmer Masterflex Console Drive with twin head bi-directionalModel 7520-c7 Cole Parmer Masterflex L/S Economy Drive with twin head ThinkCentre PC running Windows 7 Professional and installed with Biomek Software Version 4.1Serial No. 1S1OAGS11D00MJ0345JQ View Sonic 17" MonitorModel VS14768Serial No. TT1152621348 Lenovo keyboardModel KU-0225Serial No. SN8134833 Lenovo mouseSerial No. 44HM285 ALP 74cm conveyer with Microscan MS-710 barcode scannerSerial No. FIS-0710-0010 Variomag Teleshake plate shaker with power supply Beckman Coulter Accuframe positioner Passed a PAT test on 11.06.24 Included:2 x Biomek FX start-up training manuals2 x hoses for Masterflex pumps8 x data cables8 x Plexiglass screen panels10 x 719301-AA Fixed Tip Kit8 x Ferrite cable noise screening block5 x work bed fittings4 x airline connectors2 x 10 litre plastic Nalgene solvent bottles

Sequenom Agena MassARRAY Analyzer 4 System RS1000, PHX-1 & Accessories This was removed from a  (more)university lab where it was surplus to requirements. The system powers up and everything communicates but we were unable to test it further at our facility. The touchscreen on the nanodispense does not work, but we have replaced it with a monitor, mouse and keyboard. There is also a complete peripheral setup provided for the inbuilt PC in the PHX-1 system. Included in the system are; Sequenom Agena MassARRAY Analyzer 4 PHX-1Model: PHX-1Serial#: PX10060104 Sequenom Agena MassARRAY Nanodispenser RS1000Model: RS1000Serial#: 10P0413RS-01 The system also includes the following: Windows XP Software DiscNI Vision Deployment Engine for One UserMassARRAY Nanodispenser RS-1000 User's Guide v1.2.1WebPAM Software DiscFastTrak TX2300/TX4300 Quick Start GuideVarious Replacement parts (shown at end of slide)Various Plates for plate reader.

The Waters 2465 Electrochemical Detector combines sensitivity, reliability and simplicity for HPLC e (more)lectrochemical detection. Its versatile detection modes are ideally suited for analyzing a wide range of compounds. The Waters 2465 Electrochemical Detector’s multiple flow-cell configuration combines working and reference electrode designs to minimize cost and enhance flexibility. The flow cell accommodates several reference electrodes: ISAAC; traditional salt-bridge design, which limits air bubble formation; and Hy-Ref, which is ideal for carbohydrate analysis and is compatible with extreme mobile phases. Operating modes: DC, Pulse, and Scan Potential range: Between +2.00 and –2.00 V in 10-mV increments Autozero: Triggered by keyboard, rear panel contact closure, or RS-232C control Detector oven: Height 37 cm, temperatures from 7 °C above ambient to 45 °C, accuracy 0.5 °C, stability 0.1 °C; accommodates HPLC column and flow cell Wetted materials: PCTFE, FEP, 316-SS (stainless steel), Viton, silver, silver chloride, gold, and platinum

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

SCILOGEX SCI506 LCD Digital Clinical Centrifuge, with 6 x 1.5-15ml rotorThe SCILOGEX SCI506 low-spee (more)d centrifuge is supplied with a fixed angle rotor which can hold up to 6 x 15mL/10mL/7mL/5mL tubes adapters included). It is widely used for PRP, PRF, blood or urine separation in medical routine practice in hospitals, clinics or research institutes.Product Features - Speed range 300-5000rpm - Rotor speed can be set and displayed in RPM or G-force - Two memory programs - Two deceleration speeds can be set to suit different applications - Easy-to-read display - Automatic lid-lock release - Maintenance-free brushless DC motor Click Here to View Product Video INCLUDED: The SCILOGEX SCI506 LCD Digital Clinical Centrifuge, with 6 x 1.5-15ml rotor includes: - Power Cord - Two Year Manufacturer's Warranty

Hermle 12 x 5ml rotor (for Z216 series only) The Hermle 12 x 5ml rotor (for Z216 series only) is a  (more)versatile and high-capacity rotor designed for use with the Hermle Z216 series centrifuges. With a maximum speed of 14,500 RPM and a maximum RCF of 19,978 x g, this rotor can easily handle a wide range of applications in molecular biology, cell biology, and biochemistry. The rotor's 45° angle design ensures efficient and consistent separation of samples, while the ability to accommodate up to 12 x 5ml tubes at once makes it an ideal choice for high-throughput experiments. The rotor is made of high-quality materials that are resistant to corrosion and wear, ensuring that it can withstand repeated use over time. INCLUDED: The Hermle 12 x 5ml rotor (for Z216 series only) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty