Molecular Devices SpectraMax Paradigm Detection Cartridge Cisbio HTRF 0200-7011

This Perkin Elmer Fusion A Microplate Reader  Model: A153603 was removed from a university lab  (more)where it was surplus to requirements. The system has been professionally serviced and is in full working order. The PC does continually come up with a server busy message, and we have been unable to resolve that, but there is a workaround. The system is fitted with a 400mw laser. The instrument is functioning fine and can run samples smoothly. Failed PMT Dark Count (Photon Counting) - Failed due to high thermal electron current in the PMT due to high voltage in this mode. This will not affect the functionality of the instrument. Passed PMT Dark (Charge Integration) and LED Control. Server Busy message - This action cannot be completed because the other program is busy. Choose ‘Switch to’ to activate the busy program and correct the problem. It is in very good cosmetic condition with only minor marks from use.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The ETI-MAX 3000 is a fully automated microtiter plate analyzer performing the complete sample proce (more)ssing (sample pre-dilutions, sample and reagent dispensing, incubations, wash processes, plate transports) as well as the photometric measurement and evaluation. The instrument is controlled by Windows PC software. This software allows the user to process the pre-defined assays of DiaSorin as well as assays programmed by the user. The clear structure with intuitive user-guidance allows simple and quick operation of daily routine jobs as well as programming of user-specific assays. Liquid handling: 1 ml thinner Disposable tips: 300 or 1100 µl Pipette range: Simultaneous operation of 4 plates Precision (samples and reagents): CV < 8.0% at 10 µl, CV < 2.5% at 100 µl Level sensor: Electronic Clot detection: Yes Mixing: Yes (pre-dilution tube and microplate) Multipipetting: Yes (sample, control and reagent) Pipetting time samples: < 18 min/96 wells (100 µl/well) Pipetting time reagents: < 4 min/96 wells (100 µl/well) Carry-over: None Identification: Barcode scanner for primary vessels, controls and reagents, Barcode scanner for microtiter plates Tube: Diameter 10-16 mm, Height 55-100 mm Barcode type: 2/5 interleaved, UPC A & E, 2/5 IATA, 2/5 Industrial, EAN 8 of 13, Code 128, EAN 128, Pharmacode, EAN addendum, 2 of 5, Code-a-bar Capacity: Maximum 240 sample tubes Capacity: 4 separate incubators Temperature range: 5°C above room temperature to 50°C Accuracy: ± 1°C average of the plate Consistency: ± 0.7°C/whole plate Shaking: Lengthwise Capacity: Up to 4 wash buffers Wash head: 1 x 8 Pipette volume: 200 – 2500 µl/well, depending on the assay Precision: ± 5% CV at 300 µl Residual volume: < 2.5 µl in round-bottom wells, < 4 µl for flat-bottom wells Level sensor buffer: Yes Level sensor waste container: Yes Wash programs: 1 to 9, depending on the assay Incubation time: 1 to 999 seconds, depending on the assay Pipette pressure: Adjustable for each assay individually Measurement: Vertical with photodiodes, Extinction or kinetic measurement Channels: 8 Operation: Single or double, with second measurement when the measuring range is exceeded Spectrum: 400 – 700 nm Filter: Up to 8 positions are available, of which 5 are already on board (405, 450, 492, 550, 620 nm) Measurement time: < 10 seconds Dynamic range: – 0.100 to 3,000 absorption units Linearity: 0 –2,000 absorption units ± 1.0% Precision: ± 0.005 absorption units or 2.5% Dimensions (WxDxH): 1130 x 760 x 1000 mm Weight: 130 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Leica ATC 2000 Compound Microscope was removed from a university lab where it was surplus to re (more)quirements. The unit powers on and is in good cosmetic condition. The Lamp and stage are operational. We tested it with a slide and it is fully working. Included with it are 3 x Objectives; 1 x Red Leica 438 Achro 4/0.1 ∞ /0.17 1 x Yellow Leica 439 Achro 10/0.25 ∞/0.17 1 x Blue Leica 440 Achro 40/0.66 ∞/0.17 2x EyepiecesLeitz Wetzlar Germany Periplan GF 12.5x

This RS Biotech Galaxy S+ CO2 Laboratory Incubator was removed from a university lab where ti was su (more)rplus to requirements. The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It will require calibration upon installation. It is in good cosmetic condition with minor marks from use. 3 Shelves - 52 x 42.5cm

Sanyo CO2 MCO-175 Incubator This item was removed from a university laboratory where it was surplus  (more)to requirements. It is in fairly good used condition, showing signs of rust around the unit. It includes four shelves and a humidifying pan, with the door catch and seal both in good condition. The unit powers up and is in good working order (thermometer &amp; co2 analyser not included). Specifications. - Model: MCO-175 - Serial No: 20606783

Edwards XDS35iE Enhanced Dry Scroll Pump Ultimate Vacuum 0.03 mbar (0.02 Torr) Peak Pumping Speed 3 (more)5 CFM (21 m3/h-1) Inlet Connection DN 40 ISO-KF (NW40) Features - Proven dry, clean vacuum solutions for a broad range of applications - Features smart drive technology for optimal global performance - Enhanced with double start scroll form technology and by-pass valves - Reduced peak power requirements at roughing pressures for efficient operation - Continuous higher roughing speeds to handle special application needs - High flow gas ballast feature allows pumping of vapours, including water vapour up to 240 gh-1 - Simple single-sided scroll design facilitates quick and easy maintenance - Offers up to 25% increased pumping speed at roughing pressures for frequent cycling - Equipped with DN 40 ISO-KF (NW40) inlet and DN 25 ISO-KF (NW25) outlet for effective connectivity The Edwards XDS35iE Enhanced Dry Scroll Pump represents a cutting-edge solution in dry, clean vacuum technology, suitable for a wide array of applications. This pump is equipped with double start scroll form technology and by-pass valves, enhancing the original XDS35i family by increasing the roughing performance and capacity for large volume evacuations. The pump's smart motor drive ensures consistent global performance, includes overload protection, and facilitates remote start/stop operations. A key feature is the high flow gas ballast, allowing the handling of water vapour and other vapours up to 240 gh-1. Maintenance is streamlined thanks to its simple single-sided scroll design, ensuring low ownership costs and maximum uptime. Additionally, the pump features reduced peak power requirements by up to 20% during initial pump down and provides up to 25% more pumping speed at roughing pressures, ideal for high frequency cycling applications. The pump achieves an ultimate vacuum of 0.03 mbar (0.02 Torr), which slightly increases with gas ballast usage, and offers a peak pumping speed of 35 CFM. It is designed with a DN 40 ISO-KF (NW40) inlet and a DN 25 ISO-KF (NW25) outlet, ensuring efficient connectivity and robust performance. Click Here to View Product Video INCLUDED: The Edwards XDS35iE Enhanced Dry Scroll Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315&rsquo;s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

Special holders in RADWAG balances enable weighing of a wide range of microscale glassware, includin (more)g test tubes, flasks, vials, etc. The holders have been designed to increase ergonomics and minimize the risk of contamination during sample application. They have the ability to tilt the microscale glassware, allowing it to be placed at any angle, depending on the application. The set includes dedicated draft shields, to stabilise the conditions inside the weighing chamber, and a stand, to store the holders.