Molecular Devices SpectraMax M2 Multi-Mode Microplate Reader ABS FL TRF LUM

This listing is for a Molecular Devices SpectraMAX 190 Absorbance Microplate Reader.The unit is in f (more)ull working condition and is ready for immidate realese.The Molecular Devices SpectraMAX 190 Absorbance Microplate Reader is a versatile and high-performance bioanalytical instrument designed for life science research and development. With precise measurements and a broad wavelength range, it is ideal for a variety of applications, including DNA analysis and pharmaceutical research.Key Features:Wide Wavelength Range:Operates from 190 to 850 nm, enabling measurements across UV and visible spectra for diverse applications.Tunable Monochromator:Allows wavelength selection in 1 nm increments for flexibility and precision in absorbance measurements.Narrow Wavelength Bandwidth:Features a 2 nm bandwidth for enhanced resolution and specificity.Broad Photometric Range:Measures from 0 to 4.0 OD with a high photometric resolution of 0.001 OD, ensuring accuracy for both high and low absorbance samples.PathCheck Sensor Technology:Ensures less than 5% error compared to cuvette readings, delivering reliability in microplate-based measurements.Xenon Flash Lamp Light Source:Provides stable, high-intensity light for consistent results over time.Rapid Measurements:Endpoint readings in as little as 12 seconds and kinetic measurements with a minimum 9-second interval streamline workflows.Temperature Control:Operates from ambient + 4°C to 45°C with ± 0.5°C uniformity at 37°C, ensuring well-to-well consistency for temperature-sensitive assays.Isothermal Reading Chambers:Maintains a uniform environment with less than 1°C variation when temperature regulation is not enabled.Applications:The SpectraMAX 190 is ideal for:DNA Analysis: Quantification and purity assessment.Pharmaceutical Research: Drug discovery and development assays.Life Science Research: Enzyme kinetics, protein quantification, and more.

Labtech LT-4000 Microplate Reader This was removed from a university lab where it was surplus to re (more)quirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks.

This BMG Lab Technologies Fluostar Galaxy Microplate Reader was removed from a university lab where  (more)it was surplus to requirements. The unit powers up but would not connect to a PC (not included) when we tried to test it. Other units would connect to this same PC, so we are sure it is the unit itself at fault, and not the PC. It is in otherwise good cosmetic condition with minor marks but is sold for spares/repairs.

Berthold Technologies Mithras LB 940 Microplate Reader This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up but we were unable to test it further without the software. It is in good cosmetic condition with minor marks.

Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included For (more)mats Accepted 96-Well, 384-Well Flat Bottom Plates, Cuvettes Display 10-inch High Resolution Color Touch Screen Wavelength Range 200 - 1000 nm, 1 nm Steps Features - Intuitive, 10-inch color touch screen control panel - Accepts both 96 & 384-well plates as well as cuvettes - Monochromator-based system - No filters required - Wavelength range from 200 to 1000 nm - Stand-alone design - No PC or special software required - USB port for flash drive data transfer - SmartDrop™ Accessory Plate available for DNA/RNA Quantification/Purity Analysis The Accuris SmartReader UV-Vis Microplate Reader with Cuvette Port (Model MR9611) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols. The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays. The MR9611 is designed for efficient processing of multiple samples and accepts standard 96 well plates, 384 well plates, as well as cuvettes for high density screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”. Controllable plate shaking and incubation allow for optimization of assay results. Theshaking speed can be controlled at different intensities with options for timed and pulsedshaking before a reading, or in between readings when performing a kinetic assay. Thelinear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates.Temperature can be controlled from ambient +5°C up to 45°C, allowing for the processingof enzyme kinetics, and bacterial growth assays. INCLUDED: The Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included includes: - SmartReader PC Software for MR9611 - Cuvette Port - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Maximum Temperature Homogeneity The aluminum alloy plate ensures a formidable temperature homogeneit (more)y over the entire surface of the plate itself, up to 370°C Low Profile, Attractive Design RC offers an innovative low profile and highly attractive design for greater user comfort. Even the inclination of the front panel has been carefully studied to facilitate its use. - Uniform heat distribution with coated aluminum alloy heating plate - Excellent chemical resistance - Maximum temperature 370°C - Accepts beakers up to 15 liters - Choice of mains voltage / frequency model - Control panel shielded against spills - Designed for maximum durability and backed by a 3-year warranty

This item has just arrived in our stock. Please enquire for further details.

Kodak DirectView CR500 Computed Radiography Single Plate Reader This item was removed from a univers (more)ity where it was surplus to requirement. This is the reader/imaging part of a radiography system, no other parts of the system are included. It is in excellent condition and powers on, no further testing has been done. The power lead is included.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.