Labtech LT-4000 Microplate Reader Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Detection modes: Absorbance Read methods: End point, kinetic, linear scanning Microplate types: 96-w (more)ell plates Light source: Tungsten halogen Detector: photodiode Wavelength range: 380 to 900 nm Incl. Filters: 340, 405, 450, 490, 630 nm Dynamic range: 0 to 4.0 OD Resolution: 0.001 OD Pathlength correction: no OD accuracy: < 1% at 2.5 OD OD linearity: <1% at 2.5 OD, < 2% at 3.5 OD OD repeatability: < 0.5% at 2.5 OD, < 1.5% at 3.5 OD Reading speed (kinetic): 96 wells: 8 seconds Dimensions (WxDxH): 394 x 406 x 222 mm Weight: 13.6 kg Excl. software. Click for possible GEN5 basic/secure/IVD configurations

Bio-Rad UltraMark Microplate Imaging System This item was removed from a university where it was sur (more)plus to requirement. The unit powers up and is in good working order (thermometer not included).It is in fair cosmetic condition. No controller or additional equipment included to adjust the temperature. Model: Ultramark.

Perkin Elmer 1450 Microbeta Liquid Scintillation and Luminescence Counter This was removed from a un (more)iversity lab where it was surplus to requirements. The item is in good cosmetic condition with no obvious signs of damage. The system has been professionally serviced and is in good working order. A report is available on request. 2 x 96 well Microplate trays Also included: 1450 MicroBeta JETProtocol V5.0 Floppy Disk 1450 MicroBeta JetMain Program V5.0 Floppy Disk 2 x 96 well Microplate trays 2 x Injectors with connected plate and lead

This is sold on behalf of a client. Perkin Elmer Victor X4 model:-2030-0040 The Perkin Elmer Victor  (more)X4 Multilabel Plate Reader is flexible and easy to use and covers the basic luminescence and fluorescence needs. This multi-mode plate reader has direct optics ensures the very best sensitivity. The Victor X4 Multilable Plate Reader Reads in three modes, Luminescence Fluorescence Intensity: top and bottom reading Absorbance Time-resolved Fluorescence System is fully tested by Perkin Elmer Trained Engineers. Included with instrument3 Months UK Warranty Emission filter slide Excitation filter wheel Windows 10 PC Monitor Keyboard and mouse The unit is available for collection from South Wales, but we can discuss shipping for an additional cost. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

emergency shower

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean &ndash; operator does not touch moisture analyzer&rsquo;s housing. Removing any shocks caused by manual closing of the chamber &ndash; the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and &ndash; thanks to databases &ndash; particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7&rdquo; capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M &ndash; the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D &ndash; the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R &ndash; the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g &ndash; the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Edwards nEXT400D - CF160 160W Turbomolecular Pump Ultimate Vacuum &lt;1x10-10 mbar Inlet Connection  (more)DN160CF Pumping Speed Nominal 24,000.00 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.Features and Benefits - Upper magnetic bearing - ensures clean vacuum, low power and low vibration. - Optimised rotor designs - deliver high speeds and high compression. - Range of variants suitable for many applications - D = standard nEXT pump variant, H = optimised rotor design for high light gas compression and T = additional regenerative stage for increased compression and higher backing pressure capability - Integrated controller / electronics - offers direct I/O or serial control or can be connected to one of our TAG or TIC controllers for easy systemisation. - Fully user serviceable - oil cartridge and bearings can be changed in the field with minimal tooling. - Inlet screen - supplied as standard INCLUDED: The Edwards nEXT400D - CF160 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty