BMG Lab Technologies Fluostar Galaxy Microplate Reader Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

LabSystems IEMS Reader MF 1401 with Genesis Software This was removed from a university lab where it (more) was surplus to requirements. The unit powers up but we were unable to test it further. It is in good cosmetic condition with minor marks. It comes with;-LabSystems Genesis software-Dust cover

Perkin Elmer 1450 Microbeta Liquid Scintillation and Luminescence Counter This was removed from a un (more)iversity lab where it was surplus to requirements. The item is in good cosmetic condition with no obvious signs of damage. The system has been professionally serviced and is in good working order. A report is available on request. 2 x 96 well Microplate trays Also included: 1450 MicroBeta JETProtocol V5.0 Floppy Disk 1450 MicroBeta JetMain Program V5.0 Floppy Disk 2 x 96 well Microplate trays 2 x Injectors with connected plate and lead

This is sold on behalf of a client. Perkin Elmer Victor X4 model:-2030-0040 The Perkin Elmer Victor  (more)X4 Multilabel Plate Reader is flexible and easy to use and covers the basic luminescence and fluorescence needs. This multi-mode plate reader has direct optics ensures the very best sensitivity. The Victor X4 Multilable Plate Reader Reads in three modes, Luminescence Fluorescence Intensity: top and bottom reading Absorbance Time-resolved Fluorescence System is fully tested by Perkin Elmer Trained Engineers. Included with instrument3 Months UK Warranty Emission filter slide Excitation filter wheel Windows 10 PC Monitor Keyboard and mouse The unit is available for collection from South Wales, but we can discuss shipping for an additional cost. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

This FASTER BH-EN 2004-D Class II Biological Safety Cabinet was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in working order. It is in good cosmetic condition with minor marks from use. Internal Dimensions are W 119cm x D 59cm x H 73cm.

This CBS Isothermal V1500-AB Series Liquid Nitrogen Tank was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in reasonably good cosmetic condition with only minor marks form use. We were unable to test it any further at our facility. Internal dimensions 53 x 53 x 88.5cm ControllerCBS 2301 Series

This listing is for 1 of 2 Watson Marlow SCIQ 323 Peristaltic Pump. The unit is in full working con (more)dition and is ready for immidate realese. The Sci-Q 323 range is designed exclusively for scientific pumping needs, and brings a stunning level of performance and quality to the benchtop.   323S high-performance manual control variable speed pump • High-performance microprocessor controlled pumps • 323S can be extended with 313X extension pumpheads to five channels • Flow rates to 2000ml/min and 133:1 speed control ratio   323S speed adjusts in 1rpm steps from 3 to 400rpm. keypad lock prevents tampering or accidental changes, auto restart for mains failure recovery, switchable between 100-120V or 220-240V, MemoDose facility for accurate single shot dosing.   323S drives may also be fitted with 314 four roller pumpheads if lower pulsing is required, or with 313D2 or 314D2 pumpheads which accept 2.4mm wall thickness tubing for higher pressure operation or pumping more viscous fluids.   For low-flow pumping, up to ten channels, 323S drives may be fitted with 314MC (four-roller) microcassette pumpheads, which can be extended to ten channels by adding one 314MCX or 318MCX extension pumphead. This pump is fitted with one 314MC head and will be supplied with an additional spare 314MC as per images   Serial# H041702   Dims 27cm (D) x 22cm (W) x 12cm (H)

Hoefer SE250 Mighty Small II Mini Vertical Protein Electrophoresis Basic Unit Compatible Glass Plat (more)e Sizes (W x H) 10 x 10.5 cm or 10 x 8 cm Maximum Power Settings 500 V, 500 mA, 12 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 10 x 8 cm - Efficient active cooling ensures sharp bands - Quick and easy to assemble - Requires minimal buffer - Easily upgradable to the SE260 (with optional accessories) resulting in the additional capability of accommodating both 10 x 8 and 10 x 10.5 cm gels - Choose from a wide variety of accessories The Hoefer SE250 Mighty Small II Mini Vertical Protein Electrophoresis Unit is a compact, reliable system engineered for rapid electrophoretic separation, making it ideal for quick screening applications. This unit supports a maximum glass plate size of 10 x 8 cm, providing an efficient setup for a variety of protein and nucleic acid analyses. With its active cooling system, the SE250 ensures sharp, well-defined bands across samples, delivering consistent results that labs can rely on for precise electrophoresis. The SE250 is designed for quick assembly and minimal buffer requirements, streamlining workflow without compromising performance. For labs that may want to expand their capabilities, this unit can be easily upgraded to the SE260 model, adding compatibility for both 10 x 8 cm and 10 x 10.5 cm gels and broadening the range of precast gel options available. Operating smoothly within standard lab conditions, this unit handles temperatures up to 45°C and humidity levels up to 80%, while its power settings of up to 500 V and 500 mA ensure versatility for diverse experimental needs. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber - Upper Buffer Chamber with Cooling Core - Safety Lid with High Voltage Leads - Casting Cradle with Sealing Gasket Set - Casting Clamp Assemblies, 2 pcs - Cams, 4 pcs - Glass Plates, Rectangular, 10 x 8 cm, 10 pcs - Alumina Plates, Notched, 10 x 8 cm, 2 pcs - Spring Clamps, 4 pcs - Combs,10 well, 2 pcs - T-Spacers, 4 pcs - Well Locating Decals, 2 pcs - Gel Seal INCLUDED: The Hoefer SE250 Mighty Small II Mini Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber - Upper Buffer Chamber with Cooling Core - Safety Lid with High Voltage Leads - Cams, 4 pcs - Spring Clamps, 4 pcs - Well Locating Decals, 2 pcs - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Special holders in RADWAG balances enable weighing of a wide range of microscale glassware, includin (more)g test tubes, flasks, vials, etc. The holders have been designed to increase ergonomics and minimize the risk of contamination during sample application. They have the ability to tilt the microscale glassware, allowing it to be placed at any angle, depending on the application. The set includes dedicated draft shields, to stabilise the conditions inside the weighing chamber, and a stand, to store the holders.

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database