Thermo ALPS 50 V-Manual Heat Microplate Sealer

Matrix Super Sealer for Plates, Blocks and Tubes This was removed from a university lab where it was (more) surplus to requirements. This item is in good cosmetic condition and powered on without issue. We are unable to test it further at our facility.

This Fluidigm C1 Single Cell Auto Prep System was removed from a university lab where it was surplus (more) to requirements. The unit powers up and passes all self checks. It is in excellent cosmetic condition with minor marks from use. Firmware Version - 2.3-1.2-2.8-2.0Software Version - 2.2.3.1Chips Supported - 178;177;179;186;191

This Beckman Coulter BIOMEK FX Automated Liquid Handling System was removed from a university lab wh (more)ere it was surplus to requirements. The system is in full working order and was used until very recently. Included in the system are; The system units are in good cosmetic condition. The system consists of the following units: Biomek FX robotic liquid handlerSerial No. 501258024 plate position bedFitted with light curtain, two robotic heads, tip changer, Variomag Teleshake Biomek FX Device ControllerSerial No. 4000A51063 Thermo Electron Microplate HotelSerial No. 40578218With 9 x Cytomat P23 towers and 2 x Cytomat P69 towers Cole Parmer Masterflex Console Drive with twin head bi-directionalModel 7520-c7 Cole Parmer Masterflex L/S Economy Drive with twin head ThinkCentre PC running Windows 7 Professional and installed with Biomek Software Version 4.1Serial No. 1S1OAGS11D00MJ0345JQ View Sonic 17" MonitorModel VS14768Serial No. TT1152621348 Lenovo keyboardModel KU-0225Serial No. SN8134833 Lenovo mouseSerial No. 44HM285 ALP 74cm conveyer with Microscan MS-710 barcode scannerSerial No. FIS-0710-0010 Variomag Teleshake plate shaker with power supply Beckman Coulter Accuframe positioner Passed a PAT test on 11.06.24 Included:2 x Biomek FX start-up training manuals2 x hoses for Masterflex pumps8 x data cables8 x Plexiglass screen panels10 x 719301-AA Fixed Tip Kit8 x Ferrite cable noise screening block5 x work bed fittings4 x airline connectors2 x 10 litre plastic Nalgene solvent bottles

Thermo Scientific Cytomat Microplate Hotel This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. We have no key for the lock, but it is unlocked.

Thermo Scientific Spinnaker Robotic Arm F01981 Lab This item was removed from a university where it  (more)was surplus to requirement. It is in very good cosmetic condition, but we are unable to test it as it requires a connection to the full system to operate. This item also includes the following: - Emergency Stop Button - MicroPlate Mount - Data Cable

Ortoalresa Cónsul 22 centrifuge. Maximum capacity of 4 x 400 ml. Maximum speed: 14300 rpm (21,948 xg (more)). Includes RT 288 rotor for 12/8/4 microtiter plates with maximum speed of 3500 rpm. Microprocessor control. TFT touch screen with real-time information. Speed regulation in steps of 100 rpm and acceleration and braking in steps of 1 second and up to 175 ramps. Timer. Fast spin button, with adjustable speed. Automatic rotor recognition. Motorized lid closure. Maintenance free induction motor. Forced ventilation. Dimensions: 490*620*390 mm, 47kg. Consumption: 600W. User manual. The compact and high-capacity Ortoalresa Cónsul 22 centrifuge has the advantages of equipment from higher segments. The type of control it provides, through its color TFT touch screen, provides the user with functionalities that enable, in addition to controlling the equipment by operating parameters, the possibility of exporting data for subsequent analysis and programming for operation in the future. The autonomy provided by this equipment allows the user to optimize work time in the laboratory, by automating cycles and operating modes. These features also guarantee process traceability and ensure that no parameter is left out of control.

This CTC Analytics Leap HTC PAL Autosampler Heating and Cooling HPLC was removed from a university l (more)ab where it was surplus to requirements. All units are in good cosmetic condition and powered up. The CTC Analytics Leap HTC PAL Autosampler was tested with a digital thermometer (not included). We are unable to test further at our facility. Autosampler consists of: CTC Analytics main unit MXY 01-01BSerial No. 113351 CTC Analytics Injector Column MZ01-00DSerial No. 1284 2 x CTC Analytics Pumps MZ01-00DSerial Nos. 3022, 3216 Supercool Box27 sample tray heating and cooling 3 x drawers 20cm x 12cmSerial No. CCO-00103 CCT Analytics Peltier Thermostat unit MN 03-02 CCT Analytics Power Supply MN01-00 CCT Control Pad and Screen MB 01-00A Needle wash unit Included:4 x power leads1 x data cableSolvent shelf with 1 litre glass Scott Duran bottle

Temperature range: Ambient +5°C to 100°C Temperature uniformity at 37°C: ±0.3 K Temperature uniformi (more)ty at 100°C: ±1.0 K Temperature fluctuation at 37°C: ±0.1 K Temperature fluctuation at 100°C: ±0.3 K Heating up time to 37°C: 55 min Heating up time to 100°C: 90 min Recovery time after door was opened for 30 s at 37°C: 15 min Load per rack: 30 kg Permitted load: 150 kg Capacity: 112 L Internal dimensions (WxHxD): 510 x 530 x 420 mm Dimensions (WxHxD): 710 x 705 x 605 mm Weight: 54 kg

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Bransonic accessories are designed to maximize theeffectiveness of your Bransonic baths. It is impor (more)tant that parts do not reston the bottom of the bath, as it can inhibit the ultrasonic activity andpossibly damage the unit. A variety of perforated trays, mesh baskets, beakers,and support racks give you the option of direct or indirect cleaning. All fivemodels come with covers to allow the cleaning bath to heat up more quickly. *Note: Perforated Trays for the 1800, 2800, and 3800 Series have perforated holes running lengthwise toward the bottom; 3 rows only. Direct Cleaning Method - Suspends parts using a perforated tray, mesh basket, or a support rack. - Permits sound waves to penetrate directly to the parts. Indirect Cleaning Method - Suspends parts using a solid tray, or beakers with a beaker cover. - Ideal for cleaning small parts. - Discarded soil cleans easily from a beaker or solid tray. - Indirect method is ideal for sample preparation. Perforated trays, solid insert trays, and wire mesh basketshave built-in handles specially designed to prevent accessories from touchingthe tank bottom. Support racks allow total volume of the tank to be used whilekeeping parts, fixtures, or containers about 1/2" above the tank bottom. Supportracks also are useful as countertop drain racks, holding parts above thecountertop surface. For 2800 Series Ultrasonic Cleaner 0.75 Gallon.

Vortex mixer suitable for various applications due to three interchangeable attachments and various  (more)inserts. Microtubes, microplates and even 250 ml Erlenmeyer flasks can be attached using the specially designed strap. Attachments snap securely onto the device in any position. The unit is sturdy with coated die-cast zinc. Small and compact design Wide speed range, infinitely adjustable Touch or continuous mode Shaking motion: Circular motion Speed range: 500 – 2500 rpm max. content: 250 ml Dimensions (WxDxH): 127 x 149 x 136mm Weight: 4.5 kg