Accuris MS1000 SmartSeal Semi-Automated Microplate Sealer

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Global Process Concept Sarl Temperature Controller.

Sanyo Ultra Low Temperature Freezer MDF-U3086SBT ULT This was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). The door seals were examined and found to be in poor condition, torn in places and need replaced. For this reason it is sold for spares/repairs. It is in good cosmetic condition both internally and externally. Equipped with a liquid CO2 backup system, this was not testedInner dimensions 51 x 50 x 112cm (w x d x h)

This JEOL JEM2011 is being sold on behalf of a university lab where it was surplus to requirements.  (more)The system is was decommissioned in August 2023. The scintillator in the Gatan Multiscan Camera is coming to the end of its life and the Oxford EDX system has not been used in a very long time as the lab was unable to source a PC with the right connectors to support it. The pole piece is URP22_11. The system has now been decommissioned by JEOL and is ready for collection in Fife, Scotland. - JEOL JEM2011 transmission electron microscope, 200 kV operation, LaB6 or W filament - Oxford INCAx-sight/Oxford Link ISIS EDX system - Gatan Multiscan 794 CCD camera, 1024 x 1024 pix The system is sold for spares. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Corepoint Scientific NSWDUF211JWJ-1 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 2 (more)30V Temperature Setpoint Range -50°C to -86°C Capacity 21 cu. ft. Defrost Method Manual Features - Five insulated inner doors - Microprocessor controller specifications - Touch pad keys and four line display for easy programming - Large LED temperature readout - Audible and visual alarms with silence key for audible alarms - Programmable high and low temperature alarm set points - Programmable access code to limit access to set points and controller configuration - Automatic voltage boost to compensate for low line voltages - Normally open, normally closed alarm contacts and 4-20mA signal available to connect to central alarm system - RS-232 serial output - Battery backup on electronics during power outages The Corepoint Scientific NSWDUF211JWJ-1 -50°C to -86°C Upright Ultra Low Temperature Laboratory Freezer, 230V, is designed for demanding cold storage applications, ensuring the safe storage of samples and reagents. This 21 cu. ft. capacity freezer features high efficiency and low noise operation with two compressors maintaining a 300 BTUh reserve capacity. The interior includes a triple gasket seal, vacuum relief port, five double-walled insulated inner doors, and four heavy-duty stainless steel adjustable shelves. Equipped with a microprocessor controller, the unit offers touch pad keys, a large LED temperature readout, and audible and visual alarms with a silence key. Programmable high and low temperature alarm set points and an access code limit access to set points and controller configuration. Additional features include automatic voltage boost for low line voltages, alarm contacts, a 4-20mA signal for central alarm system connection, RS-232 serial output, and battery backup during power outages. The temperature range is -50°C to -86°C. The freezer also has a cam action handle with key lock, door switch for alarms, four heavy-duty swivel casters with locks, and CFC-free refrigerant. Made in the USA, this unit is ideal for laboratories requiring ultra-low temperature storage. INCLUDED: The Corepoint Scientific NSWDUF211JWJ-1 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 230V includes: - Key for Door Lock - 4 x Adjustable Shelves - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Adam Equipment EAB 225I Equinox Semi-Micro Analytical Balance, 82g/220g, 0.01mg/0.1mg Capacity 82g  (more)/ 220g Readability 0.01mg / 0.1mg Repeatability 0.05mg / 0.1mg Features - Large, responsive 5’’ 800x480 pixel touch-screen display - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - RS-232 interface provides speedy connection to computers and printers - USB host for memory card - Built-in memory for storing products and settings - External calibration allows for verification and adjustment with weights ("I" models feature internal automatic calibration) - Selectable digital filtering helps minimize effects of vibration and disturbances - Security password control prevents unauthorized access - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Preset tare function speeds the process of repetitive weighing - Parts counting with freely selectable sample sizes - Multilingual display allows use in many different countries - Memory accumulation totals results - Check weighing with audible alarm The Adam Equipment Equinox Analytical and Semi-Micro Balances deliver remarkable precision to labs that perform highly detailed testing. The Equinox is ideal for research and quality assurance facilities; science education; precision counting; and production and manufacturing applications needing exceptionally precise results. Eight analytical models offer capacities from 120g to 510g and 0.1mg readability. A color touch screen display provides intuitive operation, with icon-driven menus and readily accessible applications and functions. The five-inch screen is generously sized, offering 800 X 480-pixel resolution for excellent visibility. INCLUDED: The Adam Equipment EAB 225I Equinox Semi-Micro Analytical Balance, 82g/220g, 0.01mg/0.1mg includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

SAULAS 200x50mm Stainless Steel Test Sieve - 3.15mm Frame Material: Stainless Steel Height (Metric): (more) 50mm Diameter (Metric) External: 200mm Porosity: 3.15mm RETSCH Compatible With Seal

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Varioshake shaking incubator These LAUDA tools are renowned for being extremely reliable and suitabl (more)e for heavy use. Specialized in gentle mixing and vigorous shaking, these shaking incubators are used for applications that require repeatable orbital movements and temperatures up to +70°C with excellent stability. They are preferred by standard or research laboratories for incubation, fermentation, homogenization, chemical and biochemical reactions, enzyme and tissue studies, as well as for the cultivation of bacterial cultures. Applications: homogenization, incubation, fermentation or chemical and biochemical reactions. The control panel features soft-touch keys with clear symbols. It will therefore be very easy to set the temperature, the stirring frequency or the incubation time quickly and precisely, rest assured that the technology of these instruments will exactly reproduce the set values. The temperature - Temperature regulation is controlled by a microprocessor, PID type with RS232 interface. - The temperature distribution is optimal throughout the interior of the cabinet. - Temperature setting and display: digital, LED, in 0.1°C increments. - Temperature range: from 8°C above ambient temperature to + 70°C. - Temperature range (with cooling coil; not included): 20 to 70°C, depending on the cooling medium used and the ambient temperature. - Electronic monitoring of the temperature controllers activates visual and acoustic alarms in the event of a fault. In these cases the heating switches off automatically and the cause of the anomaly is shown on the display. Agitation and Incubation - Quiet and robust stirring mechanism with gentle start and smooth, load-independent orbital motion - The orbital motion can be turned on and off - Shaking frequency and incubation time can be set thanks to the microprocessor. - The timer continuously displays the remaining incubation time and acoustically signals its expiration. Specific features of the VS 60 OI model This model, with a liftable acrylic glass cover, consists of an external housing made of electrolytically galvanized and powder-coated sheet steel. The vibrating platform, made of aluminum, has 4 plastic pins to accommodate a vibrating tray or a universal support. - Stirring width: 30 mm - Usable volume 68 L - Shaking frequency min. 20 min-1 - Shaking frequency max. 250 min-1 - Shaking width 30 mm - Load capacity max. 12 kg - Timer from 1 minute to 999 - Vibrating platform width 450 mm - Vibrating platform depth 450 mm - Capacity approx. 60 L / 1 stirring tray

A&D Weighing ION BM-500 Analytical Balance, 520 g, 0.1 mg Capacity 520 g Readability 0.1 mg Rep (more)eatability 0.2 mg Features - Easy ION switch allows built-in fan-less internal ionizer to neutralize electrostatically charged objects instantly at no additional costs - Large breeze chamber is flexible enough to adjust to all sample vessels small or large - Anti-static glass coating blocks outside electrical interferences - Auto response adjustment allows balance to auto or manually stabilize FAST, MID, SLOW depending on draft & vibration influences - Built in environmental sensors monitor and display the temperature, humidity and atmospheric pressure - Illuminated back-mounted spirit level bubble helps reduce leveling time and increase accuracy & precision - One touch Full Digital Calibration (internal & external) ensures balance is calibrated onsite for the best performance - Auto Self Calibration will detect changes in ambient temperature and auto calibrate - Data Memory up to 200 points - GLP/GMP/GCP/ISO compliant reports with Manufacturer, Model, Serial, Balance ID, Time/Date, Mass Std, Signature space - Comes standard with USB and RS-232C with Optional Bluetooth and LAN Ethernet Interface with WinCT-Plus software - AD1688 Data Logger hand held device allows storage up to 5,000 pt with time/date and direct output via USB The A&D Weighing ION BM-500 Semi-Micro Analytical Balance offers exceptional precision with a capacity of 520 g and readability of 0.1 mg. It features a built-in fan-less ionizer that neutralizes electrostatic charges instantly, enhancing accuracy without additional costs. The balance's large breeze chamber accommodates various sample vessels, while anti-static glass coating shields against external electrical interferences. Users can tailor response times with automatic or manual stabilization settings (FAST, MID, SLOW) based on environmental disturbances. Integrated sensors continuously track and display temperature, humidity, and atmospheric pressure to maintain optimal conditions. This balance also includes an illuminated spirit level for quick leveling, enhancing accuracy and precision. With one-touch Full Digital Calibration and Auto Self Calibration, it adapts to onsite conditions and ambient temperature changes, ensuring consistent performance. The balance stores up to 200 data points and supports GLP/GMP/GCP/ISO compliant reporting, which includes detailed records such as manufacturer, model, and serial number, alongside calibration and audit details. Additional functionalities include a reverse liquid crystal display, percent weighing, piece counting, and an underhook feature for below-balance weighing. Connectivity options include a standard USB and RS-232C interface, with optional Bluetooth and LAN Ethernet connections via WinCT-Plus software. The AD1688 Data Logger complements this setup by storing up to 5,000 points with time/date stamps for comprehensive data management. A 5-year US warranty guarantees long-term reliability, making the ION BM-500 a superior choice for precise analytical tasks. INCLUDED: The A&D Weighing ION BM-500 Analytical Balance, 520 g, 0.1 mg includes: - AD-1688 Weighing Data Logger - AD-1689 Tweezers - AX-BM-033 Dust Storage Cover - Weighing Pan - Pan Support - Breeze Break Ring - Dust Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

IKA DB 5.9 Vial Dry Block (16 mm)