Job Lot 46 x Hollow Cathode Lamps AAS Perkin Elmer, Varian etc

As-is!

Job Lot of 34 Hollow Cathode Lamps This was removed from a university lab where it was surplus to re (more)quirements. These have all been tested by a manufacturer trained engineer using a Varian SpectrAA Atomic Absorption Spectrometer  Model - 220FS)) and these are the results for that (no further test have been done): Photron Hollow Cathode Lamp - Element: Na, Sodium (PN-P852) SN-4589.  Working Visimax I Hollow Cathode Lamp - Element: Zn (Cat no-62311). WorkingVisimax I Hollow Cathode Lamp - Element: Yb (Cat no-062983-00). Working Instrument Laboratory Hollow Cathode Lamp - Element: Chromium Cr. (Cat no-89211). WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Cobalt, Co (Cat no-89212).   WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Selenium, Se (Cat no-89249). WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Magnesium, Mg (Cat no-89230). not WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Maganese, Mn (Cat no-89231). Working Philips Data Coded Hollow Cathode Lamp - Element: Sn (PN-9423 390 30501) SN - 37957.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Ca-Mg (PN-9423 393 31011) SN - 38083.   Not testedPhilips Data Coded Hollow Cathode Lamp - Element: Hg (PN-9423 390 30801) SN - 37374.    WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Na (PN-9423 390 30111) SN - 28829.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Pb (PN-9423 390 30821) SN - 37759.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Cd (PN-9423 390 30481) SN - 37280.   WorkingPhilips Data Coded Hollow Cathode Lamp - Element: D2 (PN-9423 390 30011) SN - 35732.   not tested Activon Hollow Cathode Lamp - Element: Calcium, Ca (SN-27775).       not WorkingActivon Hollow Cathode Lamp - Element: Molybdenum, Mo (SN-6603).  WorkingActivon Hollow Cathode Lamp - Element: Titanium, Ti (SN-5998).  not tested Cathodeon Hollow Cathode Lamp - Element: Cr (PN-3UNX/Cr) SN - 39998.  WorkingCathodeon Hollow Cathode Lamp - Element: Ca (PN-3UNX/Ca) SN - 70591.  WorkingCathodeon Hollow Cathode Lamp - Element: Fe (PN-3QNY/Fe) SN - 40895.  Working SIP Analytical Hollow Cathode Lamp - Element: Cd (Cat no-FL2176) Lamp no.20065 NOT WORKINGSIP Analytical Hollow Cathode Lamp - Element: Pb (Cat no-FL2172) Lamp no.20008 WorkingSIP Analytical Hollow Cathode Lamp - Element: Ni (Cat no-FL2155) Lamp no.20081.  WorkingSIP Analytical Hollow Cathode Lamp - Element: H2 (Cat no-FL2159) Lamp no.20098. not tested S&J Juniper Hollow Cathode Lamp - Element: Magnesium, Mg (Cat no-4132) SN-517009. WorkingS&J Juniper Hollow Cathode Lamp - Element: Boron, B (SN-88541).   WorkingS&J Juniper Hollow Cathode Lamp - Element: Cadium, Cd (Cat no-4108) SN-514357.   WorkingS&J Juniper Hollow Cathode Lamp - Element: Lead, Pb (Cat no-4129V) SN-2936V. WorkingS&J Juniper Hollow Cathode Lamp - Element: Aluminium (SN-88765).  WorkingS&J Juniper Hollow Cathode Lamp - Element: Copper, Cu (Cat no-4114V) SN-3325.  WorkingS&J Juniper Hollow Cathode Lamp - Element: Cu/Zn (Cat no-4289V) SN-3144V.  WorkingS&J Juniper Hollow Cathode Lamp - Element: Molybdenum, Mo (Cat no-4135) SN-513155.   WorkingS&J Juniper Hollow Cathode Lamp - Element: Molybdenum, Mo (SN-88612).  Working

Gardner Denver Welch Cold Trap. Cold trap for suction and vacuum lines or Schlenk lines. It reaches  (more)−79 °C by using a mixture of dry ice and isopropanol or liquid nitrogen. Maintains temperature for 12 hours if dry ice/isopropanol is used or 2 hours if liquid nitrogen is used. 2.8 L internal glass. Transparent lid for visual inspection. Easy cleaning. The Gardner Denver Welch cold trap is used to process samples with low eutectic points. The trap is connected in series with a freeze-drying system or vacuum evaporation system and a vacuum pump to prevent contaminants from migrating to the vacuum pump.

Autoclaves BIOBASE BKQ-BII Series. Models of 50, 75 and 120 litres. Pre-vacuum. Temperature 105 ºC  (more)to 136ºC. Precision ± 0.1 ºC. The working pressure of 1,75 Bar. Timer 0-999 min. Preset programs. Baskets 1 to 3, depending on the model. Printer. Filter-water inlet. LED screen. Internal circulation of steam/water. Lid opening type steering wheel, locking with board autostretch. The process of water filling, pre-vacuum, heating, sterilizing, draining and drying functions automatically. Vapor extraction selectable fast/slow to avoid overflow of liquids. Safety Control: over-pressure, overheating, overvoltage, antisecado and door open. The price shown is for the model 50 liters. For larger volumes, select model drop-down. Biobase BKQ-BII Series Vertical Autoclaves are reliable and efficient sterilization equipment. Designed with a vertical structure, these autoclaves take up less space and are easy to operate. They feature an automatic control system that ensures precise and safe sterilization. With a capacity of up to 120 liters, these autoclaves are ideal for laboratories, hospitals, and research centers. Moreover, they are equipped with printing functions, overheat and overpressure protection, making it highly safe to use. With its modern design and reliable performance, Biobase BKQ-BII Series Vertical Autoclaves are an excellent choice for any sterilization environment.

Windshield for balance PRECISA 320 360 Ref : 350-8519 Height 260 mm New equipment (never used)

The EM series mantle is made with extreme care and is hand sewn to assure its reliability, quality a (more)nd safety. Maximum heat transfer to the sample is achieved by having excellent insulation around the cartridge and good flask coverage. Designed with flexibility and ease of use in mind, the EM series heating mantle is a reliable workhorse for your heating applications in the laboratory. All EM Electromantles have a built-in energy regulator with indicator lamps for power and heater operation. All mantles have support rod clamps as an integral feature and incorporate a grounded earth screen and double fuses for added safety. Flask capacity: 100 ml Material: Polypropylene outer case Max element temperature: 450°C Dimensions (DxWxH): 310 x 238 x 145 mm Weight: 1.25 kg

Syngene G:BOX Chemi XL 1.4 Chemiluminescence Fluorescence Gel System This system was removed from a (more) university lab where it was surplus to requirements. It is in good cosmetic condition and in good working order. This system comprises the following: Syngene Transilluminator Model: GX-2530M-E HP Windows 10 PCSoftware installed: GynSys Version 1.8.11.0

Precision Balance WTC Fast and accurate mass determination both in the lab and in the factory. Energ (more)y-efficient electronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power No access to mains power? Power failure? No problem. The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Anything else? Plenty! Printer, computer, USB flash drive, additional display – the WTC balance can work with them through communication interfaces. In addition, a real-time clock and ALIBI memory. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a balance. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.