Perkin Elmer AAnalyst 200 AAS Atomic Absorption Spectrometer

MACHEREY-NAGEL PF-11 compact photometer Nanocolor spectrometer Direct reading in mg/L Extinguishing  (more)measure Bowl lock for 16mm round tubes Easy to use Photometric pH measurement Manual wavelength adjustment: 380/405/470/520/605/720 nm Light source: tungsten lamp With rechargeable batteries Without power

Gardner Denver Welch Cold Trap. Cold trap for suction and vacuum lines or Schlenk lines. It reaches  (more)−79 °C by using a mixture of dry ice and isopropanol or liquid nitrogen. Maintains temperature for 12 hours if dry ice/isopropanol is used or 2 hours if liquid nitrogen is used. 2.8 L internal glass. Transparent lid for visual inspection. Easy cleaning. The Gardner Denver Welch cold trap is used to process samples with low eutectic points. The trap is connected in series with a freeze-drying system or vacuum evaporation system and a vacuum pump to prevent contaminants from migrating to the vacuum pump.

Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump Max. Gel Dimensions (W x L) 33 x 44 cm Heater (more) Output Power 800 W Ultimate Pressure VP200 Vacuum Pump 9 mbar Features - Rapid and even gel drying with a dry-heat vacuum method - Thermostatically controlled 800W heater for consistent operation - Independent 575W pump outlet for efficient vacuum performance - Complete system includes GD2000 Gel Dryer, VP200 Vacuum Pump, and all essential accessories - Indoor operating conditions: 15-40°C with humidity up to 80% for 15-31°C, reducing to 50% at 31-40°C - Stainless steel screen and porous polyethylene cover sheet for effective gel drying - Complies with EN61010-1, UL61010A-1, CSA22.2 1010.1, and CE safety certifications The Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump provides a fast, efficient, and safe solution for drying gels through a dry-heat vacuum method. This system ensures rapid and even drying with minimal risk of gel distortion or cracking. Equipped with a powerful, thermostatically controlled 800W heater, the GD2000 maintains consistent temperature levels to achieve high-quality results. The complete system includes the VP200 Vacuum Pump, stainless steel screen, porous polyethylene cover sheet, Mylar® and cellophane sheets, and other essential accessories for effective and reliable operation. Designed for indoor use within a 15-40°C temperature range, the GD2000 is compatible with high humidity environments up to 80% (gradually decreasing to 50% at 31-40°C). Built with safety in mind, this system meets EN61010-1, UL61010A-1, CSA22.2 1010.1, and CE safety standards, making it a durable and compliant choice for precise gel drying needs. INCLUDED: The Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump includes: - Silicone Rubber Overlay Sheet - VP200 Vacuum Pump - Stainless Steel Screen - Porous Polyethylene Cover Sheet - Vacuum Tubing–3 m - Porous Cellophane–50 sheets - Mylar® Cover Sheet - Filter Paper–10 sheets - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

The terminals are intended to designing scales with maximum resolution of 6000 e. PUE 5 series, simi (more)larly to the basic model, are enclosed in a stainless steel housing which allows for reaching the highest IP rating, i.e. IP 67. The terminals come standard with interfaces: 2 × RS232, 1 × RS485, 1 x Ethernet, 4 x USB 2.0. PUE 5 series can be extended by additional 3 weighing modules for simultaneous operation of maximum 4 weighing platforms. Intended Use: The terminal PUE 5 series is a multifunctional weighing device. It combines the best features of a PC computer and a scale. The PUE 5 operates on basis of OS Windows, creating the best option for configuring the device to individual customer requirements through installing corresponding application. If applied with dosing or formula making systems, the PUE 5 allows for operation with multiple weighing platforms, and simultaneous dosing with full process control. A dosing or formula making system that is configured on basis of the terminal PUE 5 series does not require an additional PC computer. Database editing is possible from the level of PUE 5 touch screen display or an optional PC keyboard. Area of Use: Main applications for terminal PUE 5 series: Designing industrial load cell scales; Multiple weighing applications supervised by a computer system through Ethernet module; Possibility of connecting large quantity of additional weighing platforms to industrial terminals. Terminal type: PUE 5.19R – resistive touch screen technology. Protection class IP67. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material).

The MW Manager software is intended for support of MW-01 and MW-04 mass converters via a PC. Functio (more)ns: adjustment of MW-01 and MW-04 mass converters (determination of start mass, adjustment coefficient, gravity correction, linearity correction) mass readout from MW-01 and MW-04 converters via a PC screen MW-01 and MW-04 taring and zeroing via a PC linearity determination of MW-01 and MW-04 mass converters setting weighing filters of MW-01 and MW-04 mass converters. .NET framework 4.0 plugin or later version has to be installed so that the program can operate in MS Windows. The latest software version: 3.0.0.1

Heidolph 036110220 Hei-PLATE Mix 20L Magnetic Stirrer The Heidolph 036110220 Hei-PLATE Mix 20L Magne (more)tic Stirrer was specially developed for applications with thermolabile substances. Because this model has no heating. The Hei-PLATE Mix 20L is ideal for applications up to 20 liters and can gently stir your solution in a speed range of 100 to 1,400 RPM. In addition, the rotation speed ramps up slowly until it has reached the desired value. This prevents splashes, uneven starts, or jumps of the stirring rod. The patented Kera-Disk® plate made of aluminum with a ceramic coating is chemical-resistant, scratch-resistant and has a diameter of 145 mm. This unique size makes it suitable for use with many accessories and samples on a small footprint. This unit does not have a heating function Click Here to View Product Video INCLUDED: The Heidolph 036110220 Hei-PLATE Mix 20L Magnetic Stirrer includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty