Biobase BKQ-BII Series

FluidX X-Seal AAS Automated Adhesive Sealer with Bambi VT75 Compressor Lab This was removed from a u (more)niversity lab where it was surplus to requirements. The system is in good cosmetic condition and is made up of the following units; 1x FluidX X-Seal AAS Automated Adhesive SealerS/N: 1407 This item is in very good cosmetic condition and powered on without issue - The item carried out all of its self-checks successfully on start-up - it was hooked up to the compressor, and carried out one sealing run, performing as intended. Bambi VT75 CompressorS/N: VT75-01229 52x42x61 cm28.08 Kg This item is in excellent condition (looking almost brand new), powered on without issue, and works as intended - tested to 120 psi. 1x SMC compressor regulator (with connecting tubes)P/N: AW10-M5 2x Compressor connecting tubes 4x Rubber grommets 1x Roll of Clear Adhesive SealP/N: 43-1031 2x Spare Rollers 1x Connection Valve 1x RS232 cable

Job Lot of Hollow Cathode Lamps These were removed from a university lab where they were surplus to  (more)requirements. There are 46 boxes of various brands, and it is uncertain if they are in working condition except for one box that has been labelled 'Not working.' Job lot includes:- S&J Juniper & CO Palladium 247.6 nm Cat#: 4140S&J Juniper & CO Cobalt 240.7nm Cat#: N/AS&J Juniper & CO Europium 459.4nm Cat#: 4117S&J Juniper & CO Lead 217.0nm Cat#: 3129S&J Juniper & CO Gold 242.8nm Cat#: 4121S&J Juniper & CO Cobalt 240.7nm Cat#: 4113S&J Juniper & CO Tin 233.5nm Cat#: 4162S&J Juniper & CO Gadolinium 368.4nm Cat#: 4118S&J Juniper & CO Chromium 357.9nm Cat#: 5112PES&J Juniper & CO Tellurium 214.3nm Cat#: 4157S&J Juniper & CO Cadmium 228.8nm Cat#: 4108S&J Juniper & CO Selenium 196.0nm Cat#: 4151S&J Juniper & CO Ruthenium 349.9nm Cat#: 4148S&J Juniper & CO Silicon 251.6nm Cat#: 4152S&J Juniper & CO Titanium 364.3nm Cat#: 5163S&J Juniper & CO Rhodium 343.5nm Cat#: 4146S&J Juniper & CO Indium 303.9nm Cat#: 4125S&J Juniper & CO Magnesium 279.5nm Cat#: N/AS&J Juniper & CO Mercury 253.7nm Cat#: 4134S&J Juniper & CO Bismuth Serial#: 73940Baird Atomic LTD Neon 224.6nm Cat#: C832 SNPerkin Elmer Lumina Lamp Part#: N305-0187Perkin Elmer Intensitron Lamp Cd Part#: 303-6016Perkin Elmer Intensitron Lamp Sb Part#: N066-1284Perkin Elmer Intensitron Lamp Cd Part#: 303-6016Perkin Elmer Intensitron Lamp Cu Part#: N305-0121Perkin Elmer Intensitron Lamp Part#: N305-0146Enbeeco Hallow Cathode Lamp Ar Type: C831/SrThermo Scientific Hallow Cathode Lamp Palladium Part#: B 89748Hitachi Hallow Cathode Lamp 343.5 Ne Part#: 207-2017S&J Juniper & CO Antimony Part#: 4892dS&J Juniper & CO Molybdenum 313.3nm Part#: 4746S&J Juniper & CO Cadmium 228.8nm Part#: 4101Rank Hilger Pt Cat#: FL2164Varian Fe/Co/Ni/Mn/Cu/Cr Part#: 56-100076-00Hilger & Watts Co/Mn/Fe/Cu Cat#: FL1210Hilger & Watts Ti Cat#: FL1169Pye Unicam Silver Part#: 611472Varian Techtron Pb Cat#: 4R1352Varian Techtron Cd Cat#: 4N934Pye Unicam A1 309.3nm Part#: 9423Baird Ne 249.8nm Cat#: C832-BCathodeon Ltd Ne Cat#: 3QNY/FeS&J Juniper & CO Ca/Mg 422.6/285.2 Cat#: 3621Phillips Cu Part#: 9423 390 30291Activion Ni 232/341 Serial#: 27387

As-is!

Autoclaves BIOBASE BKQ-BII Series. Models of 50, 75 and 120 litres. Pre-vacuum. Temperature 105 ºC  (more)to 136ºC. Precision ± 0.1 ºC. The working pressure of 1,75 Bar. Timer 0-999 min. Preset programs. Baskets 1 to 3, depending on the model. Printer. Filter-water inlet. LED screen. Internal circulation of steam/water. Lid opening type steering wheel, locking with board autostretch. The process of water filling, pre-vacuum, heating, sterilizing, draining and drying functions automatically. Vapor extraction selectable fast/slow to avoid overflow of liquids. Safety Control: over-pressure, overheating, overvoltage, antisecado and door open. The price shown is for the model 50 liters. For larger volumes, select model drop-down. Biobase BKQ-BII Series Vertical Autoclaves are reliable and efficient sterilization equipment. Designed with a vertical structure, these autoclaves take up less space and are easy to operate. They feature an automatic control system that ensures precise and safe sterilization. With a capacity of up to 120 liters, these autoclaves are ideal for laboratories, hospitals, and research centers. Moreover, they are equipped with printing functions, overheat and overpressure protection, making it highly safe to use. With its modern design and reliable performance, Biobase BKQ-BII Series Vertical Autoclaves are an excellent choice for any sterilization environment.

Benchmark MyFuge Mini Centrifuge The MyFuge Mini Centrifuge is a personal centrifuge that virtually  (more)fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples. An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2ml PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge. When the rotor is not in use, storage in this compartment prevents loss or misplacement of the rotor. Click Here to View Product Video INCLUDED: The Benchmark MyFuge Mini Centrifuge includes: - 8-Position Microtube Rotor - PCR Strip Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato LM-200A Overhead Flask Mixer, 115V Speed Range 50~1000 rpm Max. torque 0.1N•m Adaptable flas (more)k size 50~5000 ml Features - Wide range rotation speed of 50-1000 rpm - Maintenance free and superior DC brushless motor - Belt drive transmission minimizes noise and vibration - Capable of vacuuming up to 399.9Pa without impairing rotation efficiency - Directly attachable to a three-neck flask 24/40, 29/42 optional - Variety of stirring shafts and blades available to handle small to large volume samples - Fluorine rubber seal as standard for shaft seal, superior chemical resistant Teflon®rubber seal available as option - At the flask joint, FKM o-ring is used as standard, superior chemical resistant Kalrez® o-ring available as option - Equipped with 24/40 rotary joint, 29/42 optional - Capable of AC100-240V by changing power cord Compact design laboratory flask stirrer featuring integrated drive and stirring seal allowing direct installation of flask and stirring in a vacuum and sealed state. Equipped with digital indicator. Wide range rotation speed of 50-1000 rpm. Maintenance free and superior DC brushless motor. Belt drive transmission minimizes noise and vibration. Capable of vacuuming up to 399.9Pa without impairing rotation efficiency. Directly attachable to a three-neck flask 24/40, 29/42 optional. Variety of stirring shafts and blades available to handle small to large volume samples. Fluorine rubber seal as standard for shaft seal, superior chemical resistant Teflon®rubber seal available as option. At the flask joint, FKM o-ring is used as standard, superior chemical resistant Kalrez® o-ring available as option. Equipped with 24/40 rotary joint, 29/42 optional. Operating speed range 50-1000 rpm. INCLUDED: The Yamato LM-200A Overhead Flask Mixer, 115V includes: - Hexagon socket head cap screw & wrench - AC Adapter - 3m Power Cord - Coupling Cover - Handle - Flask Clip - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This item has just arrived in our stock. Please enquire for further details.

LS2208 barcode scanner is a manual device designed for operation in adverse industrial conditions. I (more)t integrates with RADWAG terminals, PUE H315, PUE 5, PUE 7.1, HY10, PUE C32, and balances, 5Y, R2, X2, H7. LS2208 is a high quality handheld barcode scanner. It has been designed for intense and continuous operation in retail sales, libraries, health centers and pharmacy, etc. Its light and ergonomic casing provides comfort of use. The function of dynamic scanning and wide scanning range, enable LS2208 to collect barcodes in a quick and reliable way, increasing work pace and efficiency. Intellistand™ system provides scanning of codes placed in front of the scanner, and easy switching between handheld and handfree mode (operation on a stand). A patented design of a single printed-circuit board eliminates failure endangered parts, i.e. connections between multiple boards. Scanning part of LS2208 with liquid polymere protects its module from shock based damages. LS2208 scanner features like integrated operation of various systems, universal cable or new symbols detection guarantee indispensable protection of an investment now and in the future.

The ETI-MAX 3000 is a fully automated microtiter plate analyzer performing the complete sample proce (more)ssing (sample pre-dilutions, sample and reagent dispensing, incubations, wash processes, plate transports) as well as the photometric measurement and evaluation. The instrument is controlled by Windows PC software. This software allows the user to process the pre-defined assays of DiaSorin as well as assays programmed by the user. The clear structure with intuitive user-guidance allows simple and quick operation of daily routine jobs as well as programming of user-specific assays. Liquid handling: 1 ml thinner Disposable tips: 300 or 1100 µl Pipette range: Simultaneous operation of 4 plates Precision (samples and reagents): CV < 8.0% at 10 µl, CV < 2.5% at 100 µl Level sensor: Electronic Clot detection: Yes Mixing: Yes (pre-dilution tube and microplate) Multipipetting: Yes (sample, control and reagent) Pipetting time samples: < 18 min/96 wells (100 µl/well) Pipetting time reagents: < 4 min/96 wells (100 µl/well) Carry-over: None Identification: Barcode scanner for primary vessels, controls and reagents, Barcode scanner for microtiter plates Tube: Diameter 10-16 mm, Height 55-100 mm Barcode type: 2/5 interleaved, UPC A & E, 2/5 IATA, 2/5 Industrial, EAN 8 of 13, Code 128, EAN 128, Pharmacode, EAN addendum, 2 of 5, Code-a-bar Capacity: Maximum 240 sample tubes Capacity: 4 separate incubators Temperature range: 5°C above room temperature to 50°C Accuracy: ± 1°C average of the plate Consistency: ± 0.7°C/whole plate Shaking: Lengthwise Capacity: Up to 4 wash buffers Wash head: 1 x 8 Pipette volume: 200 – 2500 µl/well, depending on the assay Precision: ± 5% CV at 300 µl Residual volume: < 2.5 µl in round-bottom wells, < 4 µl for flat-bottom wells Level sensor buffer: Yes Level sensor waste container: Yes Wash programs: 1 to 9, depending on the assay Incubation time: 1 to 999 seconds, depending on the assay Pipette pressure: Adjustable for each assay individually Measurement: Vertical with photodiodes, Extinction or kinetic measurement Channels: 8 Operation: Single or double, with second measurement when the measuring range is exceeded Spectrum: 400 – 700 nm Filter: Up to 8 positions are available, of which 5 are already on board (405, 450, 492, 550, 620 nm) Measurement time: < 10 seconds Dynamic range: – 0.100 to 3,000 absorption units Linearity: 0 –2,000 absorption units ± 1.0% Precision: ± 0.005 absorption units or 2.5% Dimensions (WxDxH): 1130 x 760 x 1000 mm Weight: 130 kg