Elga UV Lamp LC118

Job Lot of 34 Hollow Cathode Lamps This was removed from a university lab where it was surplus to re (more)quirements. These have all been tested by a manufacturer trained engineer using a Varian SpectrAA Atomic Absorption Spectrometer  Model - 220FS)) and these are the results for that (no further test have been done): Photron Hollow Cathode Lamp - Element: Na, Sodium (PN-P852) SN-4589.  Working Visimax I Hollow Cathode Lamp - Element: Zn (Cat no-62311). WorkingVisimax I Hollow Cathode Lamp - Element: Yb (Cat no-062983-00). Working Instrument Laboratory Hollow Cathode Lamp - Element: Chromium Cr. (Cat no-89211). WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Cobalt, Co (Cat no-89212).   WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Selenium, Se (Cat no-89249). WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Magnesium, Mg (Cat no-89230). not WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Maganese, Mn (Cat no-89231). Working Philips Data Coded Hollow Cathode Lamp - Element: Sn (PN-9423 390 30501) SN - 37957.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Ca-Mg (PN-9423 393 31011) SN - 38083.   Not testedPhilips Data Coded Hollow Cathode Lamp - Element: Hg (PN-9423 390 30801) SN - 37374.    WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Na (PN-9423 390 30111) SN - 28829.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Pb (PN-9423 390 30821) SN - 37759.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Cd (PN-9423 390 30481) SN - 37280.   WorkingPhilips Data Coded Hollow Cathode Lamp - Element: D2 (PN-9423 390 30011) SN - 35732.   not tested Activon Hollow Cathode Lamp - Element: Calcium, Ca (SN-27775).       not WorkingActivon Hollow Cathode Lamp - Element: Molybdenum, Mo (SN-6603).  WorkingActivon Hollow Cathode Lamp - Element: Titanium, Ti (SN-5998).  not tested Cathodeon Hollow Cathode Lamp - Element: Cr (PN-3UNX/Cr) SN - 39998.  WorkingCathodeon Hollow Cathode Lamp - Element: Ca (PN-3UNX/Ca) SN - 70591.  WorkingCathodeon Hollow Cathode Lamp - Element: Fe (PN-3QNY/Fe) SN - 40895.  Working SIP Analytical Hollow Cathode Lamp - Element: Cd (Cat no-FL2176) Lamp no.20065 NOT WORKINGSIP Analytical Hollow Cathode Lamp - Element: Pb (Cat no-FL2172) Lamp no.20008 WorkingSIP Analytical Hollow Cathode Lamp - Element: Ni (Cat no-FL2155) Lamp no.20081.  WorkingSIP Analytical Hollow Cathode Lamp - Element: H2 (Cat no-FL2159) Lamp no.20098. not tested S&J Juniper Hollow Cathode Lamp - Element: Magnesium, Mg (Cat no-4132) SN-517009. WorkingS&J Juniper Hollow Cathode Lamp - Element: Boron, B (SN-88541).   WorkingS&J Juniper Hollow Cathode Lamp - Element: Cadium, Cd (Cat no-4108) SN-514357.   WorkingS&J Juniper Hollow Cathode Lamp - Element: Lead, Pb (Cat no-4129V) SN-2936V. WorkingS&J Juniper Hollow Cathode Lamp - Element: Aluminium (SN-88765).  WorkingS&J Juniper Hollow Cathode Lamp - Element: Copper, Cu (Cat no-4114V) SN-3325.  WorkingS&J Juniper Hollow Cathode Lamp - Element: Cu/Zn (Cat no-4289V) SN-3144V.  WorkingS&J Juniper Hollow Cathode Lamp - Element: Molybdenum, Mo (Cat no-4135) SN-513155.   WorkingS&J Juniper Hollow Cathode Lamp - Element: Molybdenum, Mo (SN-88612).  Working

Benchmark H3770-CS Clamp set for H3770, includes rod and clamp Benchmark Scientific Clamp set is for (more) use with the Bench H3770 hotplate and stirrer series. INCLUDED: The Benchmark H3770-CS Clamp set for H3770 includes: - Support Rod - Clamp Assembly - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark MAGic Clamp Large Universal Platform The Benchmark MAGic Clamp universal platform for flas (more)ks & tube racks (18" x 18") is compatible with many Benchmark shakers. Click Here to View Product Video INCLUDED: The Benchmark MAGic Clamp Large Universal Platform includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This listing is for a CS Cleaver Scientific S0100A-CLE-230V Vortex Mixer. The unit is in full worki (more)ng condition and is ready for immediate release. This Cleaver Scientific variable speed Vortex Mixer combines fast, efficient mixing with minimal vibration. Unlike other vortex mixers using elliptical orbits, the true circular orbit of the CSLVORTEX facilitates uniform sample-vortexing even at low speed. The CombiHead head, which is supplied as standard, accepts many different tube sizes, while the unique overmoulding technology used in its manufacture provides a sturdy plastic core with non-slip TPE that fits optional heads for microplates, microtubes, PCR strip tubes, 15ml and 50ml tubes and blood vials. CSLVORTEX may be used in touch or continuous mode, being activated by simply depressing the sample head and then stopped by releasing the pressure. An optimised counter balance system within the CSLVORTEX minimises vibration and movement of the unit during operation, whereas its lightweight construction and small footprint allow it to be readily transported and used in areas where space is restricted.

Block: Gold anodized 96 well block Max Heating Rate: 3.5°C/sec Max Cooling Rate: 2.5°C/sec Avg Heati (more)ng Rate: 3.0°C/sec Avg Cooling Rate: 2.0°C/sec Temperature Uniformity 55°C: ± 0.20°C within 15 sec Temperature Uniformity 70°C: ± 0.30°C within 15 sec Temperature Uniformity 95°C: ± 0.60°C within 15 sec Block Temperature Range: 3°C to 99°C Gradient Temperature Range 20 to 99 °C Control Accuracy +/- 0.1 °C Block Format: 96 well (70µl) Memory: 350 typical programs in up to 30 user directories (password protected) Auto restart after power failure: Yes Lid Temperature Range: 30 to 99°C Dimensions (WxDxH): 280 x 380 x 240 mm Weight: 13.0 kg

Four-sensor powder-coated platforms are a type of industrial scales that have four load cells (strai (more)n gauges) located in each corner of the platform, ensuring accurate measurements regardless of where the load is located on the platform. Application Four-sensor powder-coated platforms are ideal for industrial applications where precise and reliable measurements of heavy loads are needed. They can be used in warehouses, logistics centres, manufacturing plants, as well as in the food, chemical and pharmaceutical industries. Powder coating provides them with extra protection against harsh working conditions, which increases their service life and reliability. Use the potential Our platforms can work with one of as many as eight weighing terminals: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10, PUE 5.

Hermle 30 x 1.5ml Rotor, Hermetically Sealed The Hermle Rotor, 30 x 1.5/2.0ml Hermetically Sealed is (more) designed to fit the Z327 model centrifuge, this rotor is capable of spinning up to 30 tubes at once, each with a capacity of 1.5 or 2.0 ml. With a maximum speed of 13,000rpm/17,758xg (or 14,000rpm/20,505xg with the -K version), the Hermle rotor provides efficient and reliable sample separation, ensuring precise and reproducible results. The hermetically sealed design of this rotor prevents any leakage or contamination during the centrifugation process, ensuring the safety of users and the integrity of the samples. Whether you are working with biological samples, cell cultures, or other research materials, the Hermle Rotor provides a reliable and efficient solution for your laboratory centrifugation needs. The Hermle 30 x 1.5 Rotor is for use with the Z327 and Z327 K centrifugesINCLUDED: The Hermle 30 x 1.5ml Rotor, Hermetically Sealed includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Branson M8800 Mechanical Ultrasonic CleanerFeatures - Sweep frequency eliminates standing waves and  (more)creates consistent cavitation throughout the tank - 40 kHz rugged industrial transducers - Mechanical control located above and behind the cleaning tank in an easily accessible control tower panel and raised to avoid damage from cleaning solutions - Convenient built-in pour drains are featured on 0.5 and 0.75 gallon models, with tank drain valves incorporated on models 1.5 gallons and larger - Plastic body, chemical-resistant Easy to use mechanical timer for setting up to 60 minutes of operation, as well as the ability to set continous operation Completely removes flux and contaminants from precision parts such as PC boards, SMDs, quartz crystals, capacitors, and many others Can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids Bransonic M and MH Series cleaners are known for offering a level of precision and reliability you have come to expect from Branson. M Series includes 60-minute mechanical timer and continuous operation. MH Series includes 60-minute mechanical timer and continuous operation with heating capability. M and MH Series cleaners offer the following features: Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. Click Here to View Product Video INCLUDED: The Branson M8800 Mechanical Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty