Benchmark H3770-CS Clamp set for H3770, includes rod and clamp

HR070-CMT 0.70X High Resolution C-Mount Adapter with Z clamp ZEISS Diganostic Instruments For Micros (more)cope The ZN Clamp is compatible with the following Zeiss microscope models: Axiophot Zxioplan Axioskop

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Yamato RFC-1301 Lab Freezer/Refrigerator Combo 4C, -20C, 115V Temperature Setpoint Range Freezer 0°C (more) to -25°C Capacity 1359L / 48 cu.ft. Defrost Method Automatic Features - Digital temperature display - High/Low alarm - Two solid locking doors - Auto or manual defrost available - Locking casters - Four shelves - Adjustable shelves - CFC-free refrigerant and insulation - UL listed - Stainless exterior / interior available - Optional chart recorder Laboratory refrigerator and freezer combination unit that comes standard with microprocessor digital controller, audible and visual alarms, alarm relay contacts, casters, and locking doors. INCLUDED: The Yamato RFC-1301 Lab Freezer/Refrigerator Combo 4C, -20C, 115V includes: - Four Adjustable Shelves - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Memmert IN55plus Natural Convection Incubator 53L, 115V Setting Temperature Range +20 to +80°C Conv (more)ection Type Natural Convection Chamber Volume 53 L (1.9 cu.ft.) Features - Internal volume of 53 L (1.9 cu.ft.) for versatile storage needs - Adjustable temperature range from +20°C to +80°C, with a working range at least 5°C above ambient - Precise control with 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring - ControlCOCKPIT with TwinDISPLAY, featuring an adaptive multifunctional digital PID-microprocessor controller with two high-definition TFT displays - Natural convection system for uniform temperature distribution, ensuring optimal results - Electronically adjustable air flap allows for admixture of pre-heated fresh air - Includes AtmoCONTROL software for managing and organizing data via Ethernet or USB interface - Safety features include adjustable electronic overtemperature monitor, AutoSAFETY system, and audible/visual alarms The Memmert IN55plus Natural Convection Incubator 53L, 115V offers precision and reliability for a wide range of laboratory needs. With an internal volume of 53 liters (1.9 cu.ft.), it provides ample space for your samples, all while maintaining a temperature range of +20°C to +80°C. The incubator is equipped with two Pt100 sensors in a 4-wire-circuit for mutual monitoring, ensuring highly accurate temperature control. Its advanced ControlCOCKPIT with TwinDISPLAY provides user-friendly operation, allowing you to adjust parameters like temperature, air flap position, and program time, all displayed on high-definition TFT screens. Designed with natural convection, this incubator ensures uniform temperature distribution without the need for a fan, making it ideal for delicate samples. The electronically adjustable air flap allows for precise control of fresh air admixture, ensuring optimal conditions. Safety is a priority with features like adjustable overtemperature protection, the AutoSAFETY system, and audible/visual alarms. Additionally, the Memmert IN55plus includes AtmoCONTROL software, enabling efficient data management through USB or Ethernet connections. INCLUDED: TheMemmert IN55plus Natural Convection Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).

KNF UN811KV.45P IP20-T Diaphragm Pump Ultimate Vacuum 100 mbar Maximum Flow Rate 13L/min (.78 m3/h) (more) Protection Class IP20 Features - Clean, 100% oil-free operation - Corrosion-resistant - Vacuum gauge and regulator for simple, convenient control - Small footprint - Can handle wet vapors without damage - Maintenance-free The KNFUN811KV.45P IP20-T Diaphragm Pump has an extremely small footprint with biguse. It features a PTFE-coated diaphragm, making it ideal for aggressive orcorrosive gasses & vapors. With a flow rate of 13L/min, and an ultimatevacuum or 75 torr, the KNF UN811KV.45P IP20-T Diaphragm Pump is a compact,powerful, fast & reliable vacuum, made for clean results. This pump is 115V. INCLUDED: The KNF UN811KV.45P IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty