Wasserbad Einsatz 48 / 208 Plätze Halterung

The G1-LN-800 is a gas generator intended for the continuous production of nitrogen with over 99.999 (more)% purity, that is often required in a variety of life science applications. This model offers a very quiet and user friendly (plug and play) operation and comes equipped with a built-in compressor unit that is completely oil-free. It is also highly economical as it offers very high production up times without the need for any additional supply options and is available with the extensive aftermarket support. This unit is capable of accommodating flows of up to 800 ml/min and can safely operate at temperatures from 5 to 45 °C. Dimensions (h x w x d): 560mm x 400mm x 700mm 230V / 50-60Hz

1x Heraeus 75002000 out-swing rotor (max 4700 rpm) suitable for Heraeus Multifuge 4x Heraeus 7500200 (more)2 bucket (max 4700 rpm) 4x Insert (8x 15 ml falcon tube capacity)

Scilogex 1.5/2.0mL BlockThe Scilogex Block has the capacity to accommodate 40 x 1.5/2.0mL tubes. Eac (more)h hole has a diameter of 10mm and overall dimensions are 15 x 9.5 x 5cm. INCLUDED: The Scilogex 1.5/2.0mL Block includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036110228 Hei-PLATE Mix 'n' Heat Ultimate Advanced Sensor Package, 145mm Plate Temperature  (more)Range 20 to 350°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - Comprehensive safety features including large safety distance and visual residual heat indicator - Automatic stir bar detector for hassle-free operation - Rotational direction setting for optimal sample mixing - Three-stage setting for stirring speed startup behavior - Programmable ramps and individual profiles for increased precision and reproducibility of experiments - Compatible with Pt1000 temperature sensor and double sensor for simultaneous measurement in sample and bath liquid - Three heating modes: FAST for quick heating, PRECISE and PRECISE+ for exact temperature control without overshoot - Multiple interfaces to ensure compatibility with your lab's data management system Heidolph 036110229 Hei-PLATE Mix 'n' Heat Ultimate Advanced Sensor Package, 145 mm Plate is equipped with numerous interfaces for automated laboratory processes. The RS232 and USB B ports allow a control via our integrated Hei-PROCESS solution. You can actually integrate your device in our Hei-CONTROL Pro software via the LAN interface. As of the middle of 2024, the LAN interface will additionally support the communication protocol OPC UA. The USB A interface at the front allows data logging via a USB stick. For more comfort and safety, you can connect the magnetic stirrer with the electric Heidolph lab jack via the USB C interface. There are three heating modes for temperature control: FAST for a quick heating, as well as PRECISE and PRECISE+ for the exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 and the double sensor Pt1000 that allows the simultaneous measurement in your sample and in the bath liquid. The possibility to program ramps and to create individual profiles, increases the precision and reproducibility of your experiments. For the stirring speed, there is a three-stage setting (start-up behavior). For mixing your sample optimally, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. This magnetic stirrer offers all relevant safety features. The large safety distance between the heating plate and the control panel as well as the visual residual heat indicator at temperatures 50 °C protect against burns. The patented Kera-Disk® plate made of anodized aluminum, is chemical-resistant, scratch-proof, and has a diameter of 145 mm. This unique size makes it suitable for the use with many accessories and samples on a small footprint. The material used also enables the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110228 Hei-PLATE Mix 'n' Heat Ultimate Advanced Sensor Package, 145mm Plate includes: - Magnetic Stirrer Hei-PLATE Mix'n'Heat Ultimate (145 mm diameter) - Pt1000 Temperature Sensor - Pt1000 Holder with Cable Device - Silicone Protective Cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. The 'D' versions, 'PBD' and 'PBD C' models, are equipped with a max 1.1 bar pressure pump only, with a max. (pressure) of 32 L/min. The 'PB' and 'PB C' models are equipped with pressure and suction pumps, mac 0.7 bar and 0.4 bar respectively, with a max. (pressure) of 25 L/min. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PBD C model - For tanks of 320 mm deep - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Pump pressure mx. 1.1 bar - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

This Liebherr MKUv 1613 Medical Fridge with Shelves was removed from a working lab where it was surp (more)lus to requirements. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition with minor marks.

Skalar San++ System Automated Wet Chemistry Analyser System Lab This system was removed from a unive (more)rsity where it was surplus to requirement. The main unit does not power on, therefore we are unable to conduct any test. Listed as Spares/Repairs. Includes PC with the following software installed:Flowaccess V3.Includes the following:-Skalar SanPlus-2 x Skalar Back Pressure Regulator 5530 -Skalar Temperature Control 5540 -Skalar Manifold 21530919-Skalar Manifold 21530917-Skalar PS-4 Power supply-PC with relevant software: Flowaccess V3.

Tecan MultiCheck for Infinite F50 - QC Tools and Megellan Software This was removed from a universi (more)ty lab where it was surplus to requirements. Items are in excellent cosmetic condition and appear to be unused. The software on the memory stick was tested and found to be working as intended - the first stages of set-up were completed without issue. 1x Test microplate absorbance reader1x 4 GB memory stick with Multicheck Infinite F50 Software1x Instruction booklet1x Sealed envelope1x Metallic sponge-lined carrying case

Labconco 711211010 FreeZone 12L -84C Complete Freeze Dryer System Features - Patented moisture senso (more)rprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco 711211010 FreeZone 12L -84C Complete Freeze Dryer System includes the Labconco 711211010 FreeZone 12L -84C Complete Freeze Dryer with stainless steel coil and collector, Labconco 7522900 16-Port Drying Chamber, and an Edwards RV8 Vacuum Pump. The Labconco 711211010 FreeZone 12L -84C Complete Freeze Dryer with stainless steel coil and collector is designed for lyophilizing moderate to large sample loads or numerous small container batches. The console features a front viewing window, interior space for a vacuum pump, and accommodation for a large tray dryer such as the FreeZone Stoppering Tray Dryers (pump and tray dryer sold separately). These models offer the broadest range of built-in options including a shell freezer. The upright stainless steel collector coil holds 6 liters of ice before defrosting. A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -84° C (-119F), suitable for aqueous samples. The Labconco 7522900 16-Port Drying Chamber includes 16 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 3/4" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. Drying Chambers provide a means to attach flasks to your freeze dryer or contain samples in bulk. The Edwards RV8 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco 711211010 FreeZone 12L -84C Complete Freeze Dryer System includes: - Labconco 711211010 FreeZone 12L -84C Complete Freeze Dryer with Stainless Steel Coil and Collector - Labconco 7522900 16-Port Drying Chamber - Edwards RV8 Vacuum Pump - All Vacuum Tubing - Edwards EMF 20 Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo CORIO CD-450F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz Refrigerant  (more) R290 Working Temperature Range -30°C - 150°C Cooling Capacity 450W (at 20°C) Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 CORIO™ CD-450F refrigerated/heating circulator with an operating range of -30…+150 °C and ±0.03 °C stability. Suitable for temperature applications with cirulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CD circulator incorporates easy change-over for control of fluid circulation internally or externally. The CORIO CD includes USB-B port for PC communication and a USB-A port for datalogging. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 450W cooling power at 20 °C with 70W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo CORIO CD-450F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz includes: - 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) - Power Cord - Two Year Manufacturer's Warranty