Yamato WA-201UVUF Auto Pure Economical Type 1 Water Purification System with 0.05 Micron Capsule Ultrafilter and Combination UV, 120V

Labconco FilterMate Portable Exhauster, HEPA Filter included One FilterMate is capable of exhaus (more)ting 24 in., 36 in. and 48 in. wide enclosures (22 3/4 in.H models) Powder-coated steel exterior base and rubber feet Quiet, nonsparking, variable-speed, motorized impeller Negative pressureplenum to capture and refilter leaked fumes INCLUDED: The Labconco 3970000 FilterMate Portable Exhauster, HEPA Filter included, 115V, 60Hz includes: - HEPA Filter - 8 feet of 5" ID Gray Flexible Hose - Two Clamps and a 5" OD Upper Transition Adaptor - XPert Balance Enclosure - Protector XVS Ventilation Station - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle Filter material PP DLW, 20um pore size, Pack of 10 The Hermle Filter material PP DLW, 20um po (more)re size, Pack of 10 is a type of filter material that is used with the Hermle SIEVA-3 Filtration Centrifuge. The filter material is made from polypropylene (PP), which is a synthetic polymer that is widely used for its durability, chemical resistance, and low cost. The DLW designation stands for "deep layer winding," which is a manufacturing technique that creates a filter material with a high filtration efficiency and a large filtration area. The Hermle Filter material PP DLW with 20um pore size is designed to remove particles and impurities from liquids, such as cell culture media, buffers, and reagents. The 20um pore size makes it suitable for filtration of particles of larger size. The pack of 10 filters provides an economical and convenient way to stock up on filters for routine laboratory use. INCLUDED: The Hermle Filter material PP DLW, 20um pore size, Pack of 10 includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Safety and resistance for your laboratory OHS advance is designed to guarantee the highest safety st (more)andards. - The durable watertight housing and IP 54 protection rating ensure durability even in the most aggressive environments. - Built-in safety alarms for overload, over temperature and over current will maintain performance over time by stopping agitation - The safe operation of the start and stop knob and the lock key prevent unintentional starts and changes in working conditions. - The built-in vibration sensor with different sensitivity levels will stop the operation and inform you to make sure your OHS is stable and properly fixed. Continuous operation guaranteed and supported by a 3 year extended warranty. First-class performance OHS 200 Advance is the ideal solution for demanding applications operating with viscosities up to 100,000 mPa. The electronically controlled brushless motor of the OHS 200 Advance agitates up to 100 l (H2O) with a maximum torque of 200 Ncm and guarantees maximum durability. SpeedServoTM torque compensation technology maintains constant speed by automatically adapting to changes in viscosity. Set the OHS 100 Advance electronic speed control from 30 to 1300 rpm. Constant Torque at Any Speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional rod stirrer and VELP OHS Series rod stirrers. The torque remains constant at any speed, even at maximum. Having a constant torque is a very important parameter for the reproducibility of the analyzes. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod fall into the liquid? SmartChuck ™ technology makes this activity quick and easy with the use of one hand and without special accessories. Two simple movements allow you to unlock the protection ring and remove or replace the stirring rod. In the event that the protection ring is opened during the analysis, the instrument stops shaking, showing a safety message on the display. Intuitive and precise control panel The intuitive 3.5” OHS Advance TFT display will guide you to precisely set your working conditions and achieve reproducible results. Show key information at a glance. Real-time information on viscosity variation with a resolution of 1 Ncm. Interact with OHS Advance from the real-time graph showing speed, torque and temperature of your test. The OHS Advance works without surveillance thanks to the timer that can be set from 1min to 99.59h. Ideal operating methods can be defined and programmed for demanding tasks where ramps and interval operations are required. Temperature under control OHS Advance is supplied with a Pt100 temperature probe included in the package. Constantly monitor the temperature of your reaction and set the meter to slow down or stop activity if the temperature reaches a defined value. This is important when you want to prevent exothermic reactions from interfering with your analysis! THE BENEFITS OF OHS ADVANCE CONNECTIVITY The OHS Advance is the only rod stirrer to offer the ability to control and monitor processes via Wi-Fi connection to VELP Ermes and via USB. The VELP Ermes cloud platform allows you to control the OHS Advance from PC, smartphone and tablet through a simple and intuitive web interface. With this platform designed by VELP it is possible to activate the shaking, set a timer, set a method (among those saved on the device), download and share reports with a click. For applications in the pharmaceutical, biotechnology and life science sectors, VELP Ermes can manage OHS Advance localized in clean rooms or other controlled environments, without the need for lengthy safety procedures. With the OHS / CotrollerSoftTM software, VELP offers the possibility to all laboratories that cannot benefit from cloud services, a valid alternative with USB connectivity. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS ADVANCE MODELS A - LCD display B - Display keys C - Stirring speed kond D - Lock key E - Main switch F - Smart Chuck

Julabo DYNEO DD-310F Refrigerated Circulator with Analog Output and Synthetic Refrigerant (R449A), 1 (more)15V/60Hz Refrigerant R449A Working Temperature Range -30°C - 200°C Cooling Capacity 300W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - Class III (FL) according to DIN 12876-1 DYNEO™ DD-310F refrigerated/heating circulator with an operating range of -30…+200 °C and ±0.01 °C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB-B connection for external PC control and USB-A for data-logging. Additional communication options include an RS232 port or an analog module interface, for voltage or current control. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tank (3-4L) with integrated drain port. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 0.3kW cooling power at 20 °C with 20W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-310F Refrigerated Circulator with Analog Output and Synthetic Refrigerant (R449A), 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA RO 5 Multiposition Magnetic Stirrer Stirring Positions 5 Positions Speed Range 0 to 1,200 RPM  (more)Speed Control 10 RPM Steps Features - Adjustable reverse operation - Wear free magnetic coils - Error code display - Easy operation with touch keypad - Suitable for continuous operation - Speed range: 0 - 1200 rpm The IKA RO 5 Multiposition Magnetic Stirrer is designed for efficient and simultaneous stirring at five positions, each capable of handling up to 0.4 liters (H2O) with a speed range of 0 - 1200 rpm. Featuring adjustable reverse operation and wear-free magnetic coils, it ensures long-term reliability and consistent performance. The device offers easy operation with a touch keypad and includes an error code display for troubleshooting. Suitable for continuous operation, the stirrer maintains a stable speed with no deviation across individual positions. The stainless steel set-up plate measures 120 x 470 mm, providing a durable and resistant surface. With a stirring position distance of 90 mm and precise speed control in 10 RPM steps, it accommodates stirring bar lengths of 25 - 30 mm. The unit's compact dimensions of 120 x 60 x 570 mm and weight of 3.66 kg make it ideal for various laboratory settings, operating efficiently within a permissible ambient temperature of 5 - 40 °C and relative humidity up to 80%. The IKA RO 5 is built to IP 40 protection standards and operates on a voltage range of 100 - 240 V with a power input of 13 W.

The Luminex 100 System is a flexible analyzer based on the principles of flow cytometry that enables (more) you to multiplex (simultaneously measure) up to 100 analytes in a single microplate well, using very small samples. The system delivers fast and cost-effective bioassay results on many assay formats including nucleic acid assays, receptor-ligand assays, immunoassays, and enzymatic assays. The Luminex 100 System is the combination of three core xMAP Technologies. The first is xMAP microspheres, a family of fluorescently dyed micron-sized polystyrene microspheres that act as both the identifier and the solid surface to build the assay. The second is a flow cytometry-based instrument, the Luminex 100 analyzer, which integrates key xMAP detection components, such as lasers, optics, fluidics, and high-speed digital signal processors. The third component is the xPONENT Software, which is designed for protocol-based data acquisition with robust data regression analysis. Multiplexing: Up to 100 analytes per sample (80 on MagPlex microspheres) Dynamic Range (Typical): ≥3.5 logs Read Time: 96-well plate in ≤45 min (up to 12,800 tests/hour) Daily Start-Up/Shut-Down: ≤30 min

Manufacturer: Thermo Scientific Model: Multifuge X3R Refrigerated Centrifuge with TX-750 Rotor & B (more)uckets (2x Adapter: 5x50ml Conical Tube, 2x Adapter: 14x15ml Conical Tube,) S/N: 41950059 P/N: 75004515 YoM: 2016 Description: The Heraeus™ Multifuge X3R Centrifuge series offers industry-leading throughput, the most versatile range of rotors and adapters, and energy-efficient operation. Recommended for use in cell culture, microplate, bioproduction, food safety, blood separation, bodily fluid processing, pharmaceutical, biotechnology, stem cell, microbiology, molecular biology, proteomics and genomics applications. This centrifuge series offers unparalleled processing performance, maximum versatility, and exceptional energy efficiency. A broad range of rotors and adapters, including lightweight Fiberlite carbon fiber rotors, are available to handle such diverse laboratory applications. Recommended for: cell culture, microplate, bioproduction, food safety, blood separation, bodily fluid processing, pharmaceutical, biotechnology, stem cell, microbiology, molecular biology, proteomics,and genomics applications Key Features: • SmartSpin technology optimizes acceleration and identifies unbalanced loads • Push-button exchange of rotors • ClickSeal bucket sealing system eliminates the need for screw caps or clips Specifications Megafuge X3R: Performance Swinging Bucket Rotors Maximum Capacity: 4 x 750 ml (with TX-750 and BIOLiner rotors) Maximum Speed: 5300 rpm (with BIOShield 1000A rotor) Maximum RCF: 5590 x g (with BIOShield 1000A rotor) Performance Fixed Angle Rotors Maximum Capacity: 6 x 100 mL (with Fiberlite F15-6x100y rotor) Maximum Speed: 15200 rpm (with 48x2 ml rotor) Maximum RCF: 25314 x g (with 48x2 ml rotor) Control system: microprocessor Drive system: direct, brushless induction low profile motor Rotor Locking System: Auto-Lock III Imbalance Detection System: SMARTSpin Programs: 6, direct access Temperature Set Range: -10 °C to +40 °C Maximum Timer Range: 9h, 99min + continuous Other Features: ClickSeal biocontainment system, language selection, motorized lid latch Max. power consumption: 1950 W Mains supply: 230 V Dimensions wit Lid closed (HxWxD): 36 x 56.5 x 67 cm Dimensions wit Lid open (HxWxD): 90 x 56.5 x 67 cm Weight: 116 kg Specifications TX-750 Rotor: Part No.: 75003180 Biocontainment Option: Yes Rotor Capacity: 4 x 750 mL Max Speed: 4700 rpm RCF: 4816 x g Angle: 90° inclusive 4x TX-750  Round Buckets  Items delivered: - Thermo Scientific Multifuge X3R Refrigerated Centrifuge - Power Cord - TX-750 Swinging Bucket Rotor - Instruction Manual as PDF via E-Mail The centrifuge is in like new cosmetic as well as technical condition - 100% functional tested.