BioRad Model 200 / 2.0 Power Supply

Generator PS 304 XL 400mA 300V APELEX New equipment in its original packaging Reference: 160600 Volt (more)age range / Resolution: 1 … 300 V / 1 volt step Current range / Resolution: 1 … 400 mA / Steps of 1 mA Maximum power: 100 W Minimum values ​​displayed: 1 volt - 1 mA Minimum regulation thresholds: 1 volt - 15 µA - 0.3 W Operating temperature: 0°C … 40°C Dimensions (l x d x h): 18 x 21 x 8 cm Weight: 1.8 kg

PowerPac HV High-Voltage Power Supply BIO-RAD Output (programmable) Voltage 20–5,000 V Current 0.01– (more)500 mA Power 1–400 W Dimensions (W x L x H), cm/in : 7.5 x 34 x 10/3 x 13.4 x 3.9 Weight, kg/lb : 2.85/6.3 With BIORAD SEQUI-GEN Cell (21 x 40 CM GELS) The Sequi-Gen GT nucleic acid sequencing cell makes it easy to cast and run sequencing gels Equipment unused

3,500 V, 400 mA, 200 W operation 9 program memories with 4 programmable independant break parameter (more)s. Vh or mAh integration and dl/dt break function. Can be used for analytical and preparative IEF, PAGE, SDS-PAGE, 2-D techniques, immunoelectrophoresis, DNA sequencing and blotting. 100-132 VAC / 198-264 VAC, 50/60 Hz, 300 W

With his modular electronic components the EN SL LC power pack with HV-Output and an integrated HV-t (more)ransformer guarantees a service-friendly power supply. The EN SL LC power pack comes with two high-voltage connections and was designed to provide Haug ionizing system with the required voltage. This power pack works ideally with Haug ionizing products, such as ionizing bars, air gates, ring ionizers etc. Do not place the power pack on a surface generating or radiating heat and avoid installation location exposed to direct sunlight. Dimensions (HxWxD): 170 x 110 x 100 mm Weight: 10 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA KMO 2 basic laboratory magnetic stirrer Model: KMO 2 B IKA Labortechnik Speed ​​range RPM: 0 - 1 (more)100 min⁻¹ Max. mixing capacity H₂O: 5 L Plate material: Stainless steel Plate, LxW: 140×120 mm W×D×H (mm): 140×200×75 Weight: 1.4 kg Input/output power: 14/4 W With stand rod height 44cm

AUTOSTILL Auto Four WS SYSTEM JENCONS distillation unit With glassware Equipment for parts

Memmert ICH750 Stability Climate Chamber 749L, 115V Temperature Range -10°C to 60°C w/o Humidity (+ (more)10°C to 60°C w/ Humidity) Humidity Control 10 to 80% RH Chamber Volume 749L (26.5 cu. ft.) Features - Superior temperature and humidity homogeneity for reliable stability testing - Complies with international standards like ICH, WHO, EMA, ASEAN, GMP, GLP, GCCP - Active humidification and dehumidification system for precise control - Large-area air jacket on four sides ensures effective thermal transfer - Hermetically sealed interior for efficient water usage once setpoints are reached - Dual high-grade platinum temperature sensors with mutual monitoring for continuous operation - Double doors with wide-area interior glass to prevent contamination and temperature fluctuations - Intuitive operation with Memmert ControlCOCKPIT and AtmoCONTROL software - Constructed from high-quality, corrosion-resistant stainless steel - Integrated data logger and multiple interfaces for advanced programming and documentation options - Condensation-free operation within specified temperature-humidity ranges - Programmable temperature and humidity ramps via AtmoCONTROL software The Memmert ICH750 Stability Climate Chamber 749L, 115V sets the standard for stability testing, excelling with its precise control of both temperature and humidity, essential for rigorous testing standards such as ICH, WHO, EMA, ASEAN, GMP, GLP, and GCCP. This climate chamber offers a temperature range of -10°C to 60°C without humidity and +10°C to 60°C with humidity, alongside a humidity control range of 10 to 80% RH. Its exceptional temperature and humidity homogeneity is achieved through a large-area air jacket on all four sides and a digitally controlled active humidification and dehumidification system. A notable feature of the ICH750 is its double-door design, which includes a wide-area interior glass door to prevent contamination and maintain temperature stability while providing clear visibility of the chamber's contents. The chamber's interior is hermetically sealed, ensuring efficient water use once the desired setpoints are reached, provided the door remains closed. Additionally, the chamber is equipped with two high-grade platinum temperature sensors with mutual monitoring to ensure uninterrupted, reliable operation even if one sensor fails. Operation is made simple with the Memmert ControlCOCKPIT and AtmoCONTROL software, which allow for intuitive navigation and easy programming of temperature and humidity ramps. The ICH750 is almost exclusively made from high-quality, corrosion-resistant stainless steel, making it both durable and easy to clean. A wide range of programming and documentation options are available through its interfaces, integrated data logger, and software, ensuring that this climate chamber is not only robust but also adaptable to various scientific and industrial applications. INCLUDED: TheMemmert ICH750 Stability Climate Chamber 749L, 115V includes: - 2 x Stainless Steel Wire Shelves - Water Tank w/ Connection Hose - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo CORIO CD-450F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz Refrigerant  (more) R290 Working Temperature Range -30°C - 150°C Cooling Capacity 450W (at 20°C) Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 CORIO™ CD-450F refrigerated/heating circulator with an operating range of -30…+150 °C and ±0.03 °C stability. Suitable for temperature applications with cirulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CD circulator incorporates easy change-over for control of fluid circulation internally or externally. The CORIO CD includes USB-B port for PC communication and a USB-A port for datalogging. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 450W cooling power at 20 °C with 70W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo CORIO CD-450F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz includes: - 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) - Power Cord - Two Year Manufacturer's Warranty