Radwag UMA 2.5Y.F Automatic Weighing System

The AK-6 5Y.F weighing system is a first-class solution for professional filter mass measurement. Dy (more)namic control and correction of mass indications both ensure fast and stable weighing regardless of the weighed filter type. Effective Weighing Analysis Automation of the weighing cycle, thanks to the elimination of the 'human factor', is a guarantee of measurement repeatability and accuracy impossible to be obtained in case of manual weighing. This is especially crucial when assessing emission of particulate pollutants, emitted by combustion engines (Euro 6 Standard). Additionally, it allows to carry out tests and research while maintaining measurement repeatability of sd < 0.2 µg. Filter Container Filter insert of special design allows to store filters in perfect conditions, it guarantees filter security in the course of transport. Each filter is stored and conditioned in a closed container protecting the filter against absorption of potential contamination from the air. The device features a 6-position magazine. Measurement of Ambient Conditions Inside the Chamber The automatic weighing system, AK-6 5Y.F, is equipped with a high-class thermo-hygro-barometer allowing to test ambient conditions in real time with the accuracy of: ± 1 hPa (pressure) / ± 1.8% (humidity) / ± 0.1 °C (temperature). Metrological Control Correctness of weighing system operation may be periodically verified via a certified mass standard of weight similar to the weight of tested filters. The weighing system of AK-6 is certified by NMI and approved by an accredited Measuring Laboratory (calibration certificate). Control aiming to specify whether the system operates correctly or not may be performed with an external adjustment mass, i.e. certified external mass standard, or a reference filter. Dedicated Software Ergonomic software supported by an independent RMCS application allows to manage time and comparison test plans of each filter or filter series. Summary reports and report components are defined by the system administrator.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Ionizer Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Ionizer Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The UMA 2.5Y.FC automatic weighing system has been designed to test mass changes of filters made of  (more)quartz glass fibre, glass fibre, teflon and teflon covered with glass fibre. Mass measurement is carried out with readability of 1 μg or 0.1 μg. The weighing system enables conditioning filters in accordance with PN-EN 14907 and PN-EN 12341 standards. Effective and Excellent Measurement The UMA 2.5Y.FC automatic weighing system is a first-class solution for professional mass measurement. Dynamic control and correction of mass indications both ensure fast and stable weighing regardless of the weighed filter type. The UMA weighing systems, due to the elimination of the human factor, temperature changes and air drafts, guarantee excellent measurement repeatability. Effective Weighing Analysis Full automation of the weighing cycle, thanks to the elimination of the ‚human factor’, is a guarantee of measurement repeatability impossible to be obtained in case of manual weighing. Remote programming of measurement processes significantly increases operation efficiency. Dedicated Software The RMCS Filters software allows to manage time and comparison test plans of each filter or filter series. Summary reports and report components are defined by the system administrator. Metrological Control Periodically, correctness of weighing system operation is verified via a certified mass standard or a reference filter. Stable Mechanical Design The UMA 2.5Y.FC automatic weighing system is equipped with an integrated anti-vibration table ensuring the greatest stability of mass measurements. Ambient Conditions Module The ambient conditions module is housed inside the bottom part of the weighing system. This results with a laminar air flow that does not disturb the ongoing filter mass measurement. The range of temperature and humidity changes is automatically forced in accordance with the values programmed via device terminal. Climate Chamber The integrated climatic chamber guarantees constant ambient conditions in the chamber, ensuring proper filter conditioning in accordance with the PN-EN 12341:2014 standard: stability of operating temperature: ± 1oC, stability of relative humidity: ± 2.5%, the operating humidity in the climate chamber during the process: 30–60%, the room temperature during operation must remain within the range of 19-25°C, and the relative humidity should oscillate between 40–60%.

The RB 2.5Y.F filter robot is a professional-class measuring device ensuring full automation of filt (more)er mass measurement. The robot is based on MYA 5Y microbalance mechanism that guarantees unrivalled repeatability and redability of d= 1 µg. The device enables weighing up to 1020 filters with 47 mm diameter. The device is enclosed in a tight and dustproof chamber protecting it against any contamination. The air conditioning and humidification system ensures stable and fixed ambient conditions inside the chamber, which guarantees correct filters conditioning. Ambient conditions monitoring allows control of current chamber status and report of data. Advantages: Fully automatic system for weighing filters with Ø 47 mm Compliance with EN 12341:2014 standard Conditioning and weighing of up to 1020 filters Additional reference magazine Less time consumed when compared to manual filter weighing Elimination of human factor as the reason of measurement errors Process management using RMCS Filter software Automatic data recording, creating reports and statistics Coding and identification of filters using QR code system Elimination of the influence of electrostatics onto the measurement Hermetic robot chamber and the chamber for filter weighing Air conditioning system, HEPA filter (version without air conditioning on request) Increased pressure in the chamber prevents contamination The RB 2.5Y.F filter robot comprises: Two magazines for filter storage and weighing. Each magazine consists of 34 discs with 15 filter positions. A six-position reference magazine for storing mass standards and reference filters. A robot with a gripper enabling transport of the filters between the magazine and the microbalance, the robot moves on three axes: X,Y,Z; Microbalance with a draft shield; Ionizing system; An air conditioning system with HEPA filter for cleaning the air in the vicinity of the robot chamber; Ambient conditions monitoring (temperature, humidity, pressure); Weighing indicator for managing of the device operation; QR code reader integrated with the device; QR code printers; A PC with the RMCS Filters software for managing the device operation; Control and adjustment system; An external air conditioning unit.

The MYF chamber for filter weighing is characterized by high ingress protection. Large open-work wei (more)ghing pan enables precise weighing of filters of various dimensions (max ø100). The chamber is made of stainless steel and is resistant to chemicals, colour change and scratches. The new system of chamber disassembly facilitates maintenance activities. The top lid of the chamber has been equipped with a glass opening allowing the operator to check whether the filter remains in its start position after chamber closing. The chamber for filter weighing may be used in MYA 5Y microbalance and UYA 5Y ultra-microbalance after disassembly of a regular weighing chamber. When placing an order for a chamber for MYF filter weighing, a serial number of the scale is required.

Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump Max. Gel Dimensions (W x L) 33 x 44 cm Heater (more) Output Power 800 W Ultimate Pressure VP200 Vacuum Pump 9 mbar Features - Rapid and even gel drying with a dry-heat vacuum method - Thermostatically controlled 800W heater for consistent operation - Independent 575W pump outlet for efficient vacuum performance - Complete system includes GD2000 Gel Dryer, VP200 Vacuum Pump, and all essential accessories - Indoor operating conditions: 15-40°C with humidity up to 80% for 15-31°C, reducing to 50% at 31-40°C - Stainless steel screen and porous polyethylene cover sheet for effective gel drying - Complies with EN61010-1, UL61010A-1, CSA22.2 1010.1, and CE safety certifications The Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump provides a fast, efficient, and safe solution for drying gels through a dry-heat vacuum method. This system ensures rapid and even drying with minimal risk of gel distortion or cracking. Equipped with a powerful, thermostatically controlled 800W heater, the GD2000 maintains consistent temperature levels to achieve high-quality results. The complete system includes the VP200 Vacuum Pump, stainless steel screen, porous polyethylene cover sheet, Mylar® and cellophane sheets, and other essential accessories for effective and reliable operation. Designed for indoor use within a 15-40°C temperature range, the GD2000 is compatible with high humidity environments up to 80% (gradually decreasing to 50% at 31-40°C). Built with safety in mind, this system meets EN61010-1, UL61010A-1, CSA22.2 1010.1, and CE safety standards, making it a durable and compliant choice for precise gel drying needs. INCLUDED: The Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump includes: - Silicone Rubber Overlay Sheet - VP200 Vacuum Pump - Stainless Steel Screen - Porous Polyethylene Cover Sheet - Vacuum Tubing–3 m - Porous Cellophane–50 sheets - Mylar® Cover Sheet - Filter Paper–10 sheets - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VACUUBRAND AK Inlet Separator/Catchpot for RE/RZ5, RE/RZ6, and RE/RZ 2.5 Separators at the inlet pro (more)tect pumps from particulates and droplets which may shorten service intervals and even reduce the lifetime and the operating performance of oil-sealed rotary vane pumps. Separators (AK) protect the vacuum pump at the inlet from particles and liquid droplets. Separators catchpot made of plastic (PMP) with good chemical resistance. INCLUDED: The VACUUBRAND AK Inlet Separator/Catchpot for RE/RZ5, RE/RZ6, and RE/RZ 2.5 includes: - VACUUBRAND AK Inlet Separator/Catchpot for RE/RZ5, RE/RZ6, and RE/RZ 2.5 - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Thermolyne thermostatic block. Contains 2 blocks for 20 samples each and 1 block of 30 positions.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW