Benchmark B3220-2000 hybex Erlenmeyer Flask, threaded with cap, 2000ml, 1 Each

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Lancer 820 LX Undercounter Laboratory Washer and Dryer This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks. Internal dimensions - D51 W52 H52cm

VACUUBRAND MZ 2C NT +AK+EK Chemistry Vacuum System Ultimate Vacuum 7 mbar / 5 torr Maximum Pumping  (more)Speed 1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance. - High performance even at low vacuum levels. - Optimized vacuum even with gas ballast for condensate purge. - Whisper quiet and very low vibration. - Excellent environmental friendliness due to efficient solvent recovery. This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors in chemical, biological and pharmaceutical laboratories. Typical applications are rotary evaporators, vacuum concentrators and vacuum drying ovens. The separator at the inlet (AK), made of glass with protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling, and active protection of the environment. INCLUDED: The VACUUBRAND MZ 2C NT +AK+EK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-VAP Core ML/G3 Non Coated Motor Lift w/ G3 Vertical GlasswareThe Hei-VAP Series of rota (more)ry evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. The PTFE vacuum seals are highly resistant and can achieve maximum tightness and reduce expensive spare parts. The 210℃ universal heating bath is suitable for all flasks up to 5 liters. Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm. Corrosion free die cast housing features condensation repellent varnish. The Heidolph Hei-VAP Core features an operating concept that is focused on the essentials: clear and with access to the basic parameters rotation speed and heating bath temperature at any time. Two separate knobs with dynamic control for setting the rotation speed and heating bath temperature: fast turning for large jumps, slow turning for precise setting of the set values. The Intuitive LED ring light system makes activated functions clearly visible even from a distance. Features: - Digital display - Direct access to rotation and heating bath temperature - Lock function - Standby button - Residual heat warning Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Core ML/G3 Non Coated Motor Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3 Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Eppendorf Fixed Angle F-34-6-38 Rotor Eppendorf Fixed Angle F-34-6-38 Rotor with Lid, never used, ne (more)w in box. This rotor is for use with Eppendorf 5804, 5804R, 5810, and 5810R Benchtop Centrifuges. INCLUDED: The Eppendorf Fixed Angle F-34-6-38 Rotor includes: - Rotor Lid - Full 1 Year Parts and Labor Warranty Eppendorf F-34-6-38 Rotor SpecificationsMax Speed11,000 RPMMax RCF15,500 x gCapacity6 x 85ml

QUALITY LABORATORY CENTRIFUGES - OHAUS Ohaus designed this instrument to cover virtually all applica (more)tions in research, industrial and clinical laboratories. The bestselling FC5718, like the entire Frontier™ 5000 range, offers high speed performance for maximum volume, automatic rotor identification and next generation safety features. The best versatility - Large variety of compatible rotors and accessories (19 optional rotors and 121 accessories) - Microliter to 4x100ml capacities (including PCR strips and microliter plates) - High-speed centrifugation for tubes from 0.2ml up to 85ml - Available in the version with refrigeration system and variable temperature from -20°C to 40°C The best usability - Automatic recognition of the rotor in seconds - No risk of damaging the centrifuge even if used by less experienced personnel - Easy-to-read LCD control panel; two-line display and real-time information - Ergonomic adjustment knob for easy parameter setting - Ability to set and view the speed in both rpm and RCF - 99 sets of storable parameters More security - Double imbalance sensor: two separate sensors designed to detect high and low vibrations, caused by imbalances; computerized detection system with dedicated unbalance parameters for each rotor - Motorized locking system for the centrifuge lid - Overspeed protection automatically activated upon rotor installation - Better protection for both equipment and personnel You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. Applications Separation, sample preparation, cell pelletization, protein separation, nucleic acid separation, cell concentration, chemical separation, diagnostics, environmental sample preparation, blood sample processing Screen Backlit Liquid Crystal Display (LCD) Materials Corrosion resistant stainless steel chamber with polycarbonate / ABS plastic lid Additional features Ten speeds of acceleration and deceleration, selection of run time from 10s to 99h 59min or continuous, CFC-free refrigeration system (refrigerated models), sample temperature (refrigerated models), lid lock system, overspeed protection, detection double imbalance TECHNICAL FEATURES - Speed ​​range from 200 rpm to 18,000 rpm - Maximum relative centrifugal force (xg) 23,542 g - Maximum capacity (rotor) 4 x 100 ml - Program memories 99 - Acceleration gear 10 - Deceleration gear 10 COMPATIBLE ROTORS: Angle 4 x 85ml ID RB Hi. Angle 12 x 15ml RB / FA ID. Angle 24 x 1.5 / 2.0ml ID Sealable. Angle 6 x 50ml RB ID Hi. Swing out 4 x 100ml ID. Angle 12 x 1.5 / 2.0ml ID. 4 x 8W PCR Strip ID Corner. Angle 44 x 1.5 / 2.0ml ID. Swing out 4 x 100ml ID sealable. Angle 6 x 85ml ID RB. Angle 24 x 1.5 / 2.0ml ID. Angle 6 x 85ml RB ID Hi. Angle 30 x 15 ml RB / FA ID. Angle 30 x 1.5 / 2.0ml ID Sealable. Angle 10 x 50 ml FA ID. Angle 64 x 0.5ml ID. Angle 20 x 10ml ID RB Hi. Angle 6 x 50ml RB / FA ID. Swing out 2 x 3MTP ID.

Alpha Series - Cooling thermostats with essential functions LAUDA Alpha offers reliable technology a (more)nd modern design for temperature ranges from -25°C to 100°C. This line of devices is suitable for internal and external thermostats with non-flammable liquids (water and water / glycol). Thermostats are the perfect solution for most laboratory temperature control applications. Reduced to the most essential functions, this product line will win you over for its reliability and ease of use. Under / over temperature alarm; countdown function; drain screw; 1 point calibration The RA 8, RA 12 and RA 24 cooling thermostats have a tank lid and pump connections as standard, helping refrigeration across the entire temperature range from -25 to 100°C. Finally, automatic compressor control extends compressor life and offers savings on operating costs. Examples of specific applications - Preparation of samples in chemistry and pharmacy - Functional tests of electronic components - Test of sliding bearings - Beer forcing test - Valve test - Stress test - Bending test of the notch - Expansion test - Brookfield test - Semiconductor coating Notable features - Cost savings thanks to automatic compressor control: cooling capacity is provided only when it is needed - Easy cleaning of the cooling air inlet by simply removing the front cover without tools - Stainless steel tank - Connection of the drain on the rear Graph of cooling performance of RA Alpha Lauda cryostats. Pump performance graph. TECHNICAL VISUALIZATION 1 - Control head 2 - Pump connections: return to bath and pump outflow 3 - Bath cover 4 - Handle on front and back 5 - Removable front cover 6 - Grille on both sides 7 - Four mounting feet 1 - Mains cable 2 - Rating label 3 - Cooler cable 4 - Bath drain nozzle

Temperature range: 3°C to 16°C Maximum fluctuation: 3.6 °C Maximum gradient: 4.1 °C Defrosting syste (more)m: Automatic defrosting system Cooling system: Dynamic Capacity: 333 L Dimensions (HxWxD): 1840 x 597 x 615 mm Internal dimensions (HxWxD): 1635 x 440 x 435 mm Weight: 65 kg

Samples and applications - Preparation of foamy mixtures (ice cream, butter, margarine, icing) and s (more)preadable creams - Preparation of tablets coatings - Preparation of pharmaceutical ointments and creams - Preparation of cosmetic products (lip balm, soap, shampoo, conditioner, creams, lipstick, mascara) - Preparation of pigments, inks, paints - Preparation of biodiesel and dispersion of petroleum derivatives (e.g., asphalt) TECHNICAL DATA - Rotor diameter: 15 mm - Stator diameter: 20 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 50 - 2,000 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 19.6 m/s - Ultimate fineness, emulsions: 1-7 µm - Ultimate fineness, suspensions: 5-40 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

IKA Loopster Basic Shaker Type of Movement Rotating Speed Fix 20 RPM Tilt Angle Turntable Max. 90°  (more)Features - Freely adjustable rotary angle - Different attachments allow a variety of applications - Usable at 4 to 50 °C in incubators - Easy operation by foil keypad - Suitable for continuous operation - 20 rpm (fixed) The IKA Loopster Basic Shaker is a versatile and reliable laboratory tool designed for continuous operation with a fixed speed of 20 rpm. It features a freely adjustable rotary angle, making it suitable for a wide range of applications with different attachments. The shaker is usable in incubators at temperatures ranging from 4 to 50 °C, and its easy operation via a foil keypad ensures user convenience. Capable of handling a permissible shaking weight of 2 kg, it operates with a rotating movement and offers a tilt angle turntable range from 0° to 90°. The compact dimensions of 300 x 360 x 300 mm and a weight of 3.644 kg make it an efficient choice for various laboratory settings. Built to IP 21 protection standards, the Loopster Basic Shaker operates on a voltage range of 100 - 240 V with a power input of 24 V and a current consumption of 1000 mA.