Illumina BeadXPress DNA Bead Array Reader

Chemotec NucleoCounter Type 900-004 This was removed from a lab where it was surplus to requirement (more)s. The unit powers up and it is in good cosmetic condition with minor marks from use. The PSU is included.

Applied Biosystems ABI Prism 7900HT This was removed from a university lab where it was surplus to  (more)requirements. The unit powers up but has the following issues. The 7900 did connect to the PC at first but there appears to be a fault with the plate loader. The door will not open when instructed. If you try to run a program you get a 3003 error. 'unable to load the plate, Tray not at up position'.There was a loud humming noise coming from the unit which appeared to get louder the longer it was switched on. Then would no longer connect to the PC. We have removed the side panels but cannot see any obvious issues. It is sold for spares/repairs. The PC is included. Dell Optiplex PCDell 17" MonitorKeyboard & MouseUSB CableDVI Cable All parts power on and work, the pc has ABI 7900HT Sequence Detection Systems Version 2.4.1 Software.

Life Technologies Ion Torrent OneTouch ES with PC & Accessories This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up but has not been tested further. The server is running ubuntu and has no graphical front end. Included with the Ion Torrent OneTouch ES is; 1 x Tip Loader Assembly1 x Tray Assembly1 x Tip Arm Assembly7 x Wash Bottles - unboxed1 x New Wash Bottles in Box1 x Line Clear Equipment Box - Includes various items, all photographed.1 x Ion 318 Chip Kit V2 - 4 pack3 x Ion PGM Template OT2 Reactions 200 kit

AB Applied Biosystems Hitachi 3130xl Genetic Analyser This system was removed from a university lab, (more) where it was surplus to requirements. It is in good cosmetic condition but has not been powered on at our facility due to restrictions around Class 3 Lasers. The previous owner confirmed it was in good working order prior to removal. Specifications: - Serial No. 17215-001 - Year 2005 Included:2 x 96 well plate retainer Part No. 43172412 x 96 well pate retainer Part No. 431723742 x 96 well plate mats1 x lower polymer block cleaning kit12 x cleaning swabs1 x 20ml Norm-Ject syringe1 x cable3 x power cables4 x spare water and buffer reservoirs5 x small bore pipes with end fittingsSeveral small seals and pipe fittings

Illumina cBot 800 Automated Amplification DNA Sequencer Lab This item was removed from a university  (more)lab where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility. Specifications: - Model: 800 - S/N: 6002416

Gilson MICROMAN E PipetteThe ergonomically designed MICROMAN® E positive displacement pipettes, alon (more)g with disposable capillary piston (CP) tips, provide the highest precision when pipetting viscous, non-aqueous liquids such as oils, blood, glycerol, and more, while protecting the pipette from contamination. MICROMAN E is available in six models covering a volume range of 1 to 1000 µL. MICROMAN E relies on positive-displacement technology to improve the precision of transferring viscous and volatile liquids. The capillary piston (CP) tips eliminate the air cushion between the sample and piston so volume accuracy is not affected by the sample’s properties. Tackle these issues with MICROMAN E: - Viscous solutions—difficult to aspirate and stick to pipette tips. - Volatile solutions—leakages are created from differences between solvent vapor pressure and the air pressure within the pipette. - Cold liquids—delivered in excess amounts. - Hot liquids—under-delivered amounts. Designed with Comfort and Performance in Mind The Red Dot Award winning design of the MICROMAN E features an improved handle shape that rests comfortably in your hand, with a large push button for easy aspiration and dispensing. The volume-locking switch allows for easy volume adjustment and minimizes the risk of accidentally changing the volume during pipetting tasks. Overall Protection The positive-displacement technology of the MICROMAN E is ideal when dealing with infectious solutions and radiolabeled components. Since the disposable piston makes direct contact with the sample, the user and the pipette are protected. Within molecular biology and forensic sciences, any trace of a previous sample can lead to erroneous results and the disposable CP tips provide absolute protection against cross-contamination.

Labconco Heated Product Shelf Chamber, 3 shelvesFor use with any FreeZone Freeze Dryer manufactured  (more)afterJuly 2017. Chambers allow for drying of bulk samples, or drying of serumbottles, vials or microplates. The 10" diameter shelves are wireless andremovable so that they may be placed in a freezer for pre-freezing. Each shelfis height adjustable to accommodate a broad variety of sample sizes. Chamberconnects to a FreeZone Freeze Dryer for control and recording of shelftemperature from the Lyo-Works display. Temperature may be set from -20C (-4°F) to +60C (+140F). Each Chamber includes a 12" diameter clear acryliccylinder, vacuum release valve, cap for vacuum port and 8" diameteropening to collector on bottom of chamber. Will fit 10.12” or 14.0” diametercondensers. Short Chambers include three shelves and three temperature probes.Tall Chambers include five shelves and five temperature probes. INCLUDED: The Labconco 780801000 Heated Product Shelf Chamber, 3 shelves, 115V, 60Hz includes: - Communication Cable - Power Cable - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Manufacturer: Beckman Coulter Model: J-26S XP BioSafe Three-Phase Description: The J-26S X sets the  (more)standard for performance, including high speed, low heat dissipation, imbalance tolerance and low noise level, and its wide range of separation capabilities is extended even further, now including three-phase filtration that further separates airlock material into solids, liquids and gases. The addition of a High Efficiency Particle Arrestance (HEPA) filter set makes the unit bio-safe. The J-26S XP centrifuge features a more impact-resistant lid, full containment barrier and automatic rotor detection. The ergonomic design - with lower unit height and hands-free door operation - remains unchanged. The J-265 XP can process six liters of fermentor output in less than 10 minutes, deliver a subcellular fraction at 82,000 x g, and run 24 microplates simultaneously. The unit automatically detects which rotor is installed and prevents the rotor from exceeding its maximum speed. It enables faster, quieter and more energy-efficient operation with better temperature control. The exclusive, high-torque SR (Switched Reluctance) drive reduces cycle times. Core features: - Processing six liters of digester output in less than 10 minutes. - Deliver a subcellular fraction at 82,000 x g - Run 24 microplates at once - Separate live cell populations with elutriation - Sterile filters prevent the escape of infectious material Specifications: Maximum speed: 26,000 rpm Acceleration: Maximum, slow or timed (1-10 minutes, 0-500 rpm). Deceleration: Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off Maximum capacity volume range: 1 - 6 L Refrigeration system: CFC-free, non-ozone depleting refrigerant Temperature range(s): 10°C - 40°C in 1 degree increments Weight: 290kg Dimensions (W x H x D): 71cm x 86cm x 86cm Power requirements: 220/380 VAC, 50 Hz, 3 phases Humidity restrictions:< 95% (non-condensing) Scope of delivery: - J-26S XP BioSafe Three-Phase without rotor - Instruction manual as PDF via e-mail If you need a suitable rotor, we are happy to help! The unit is in absolute top condition and has been 100% function tested.

Vacuum systems are widely used for the aspiration and disposal of liquid waste, for instance, when r (more)emoving media from cell cultures, supernatant after centrifugation, and wash solutions from immunoassay well plates. The aspiration of waste liquids is a routine yet time-consuming task. The user-friendly VACUSAFE system streamlines this repetitive workflow, freeing up lab personnel to perform other vital tasks. It also provides a secure alternative to do-it-yourself liquid waste disposal systems typically found in laboratories, protecting operators from exposure to liquids and aerosols for a safer working environment. The system additionally features optional liquid level detection to prevent overfilling, and a filter to protect the vacuum source from contamination. Vacuum range: -300 to -600 mbar (adjustable) Pump flow rate: 8 l/min (air) Liquid aspiration rate: 17 ml/s (aspiration pipet) Noise emission: <50 dB(A) at 1 m Dimensions (HxWxD): 530 x 180 x 320 mm Weight: 3.4 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7&quot; colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal&rsquo;s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.