VACUUBRAND MV 10 NT Diaphragm Pump

ACCELA pump and autosampler for HPLC THERMO SCIENTIFIC ACCELA pump that does not start ACCELA autosa (more)mpler not tested To be considered for parts

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The N 820.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products.  The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications.  When the humid gases are sucked in, condensation may form in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 20 l / min Final vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Abbott Commander Incubator 8 shelves Type 6210/02

Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5° - 35° C,  (more)5200W, 230V 60HzDuraChill Chillers provide cooling power for demanding applications and serve as an economical alternative to tap water cooling systems. All models feature a microprocessor-based controller, digital Temperature Display (°C or °F), one-touch set point display, and digital Pressure/Flow Rate Display (PSI, kPa, GPM, LPM) with push-Button selection. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended.Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available INCLUDED: The Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5° - 35° C, 5200W, 230V 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5200W, 230V 60Hz SpecificationsKey SpecificationsDescription1.5 HP Chiller, Positive Displacement; Air-CooledDisplayLEDConnectivityOptional: RS232, RS485Working Temperature Range °C5° to 35°Temperature Stability °C±0.5°Temperature Calibration Capability1-pointPump TypePositive Displacement 60 Hz OnlyPart Number6860P46A270DMaximum Pressure (psi)100.0Maximum Pressure (bar)6.90Maximum Pressure Flow Rate (gpm)3.50Maximum Pressure Flow Rate (l/min)13.2Cooling Capacity @ +10°C (W)4420Cooling Capacity @ +20°C (W)5200Cooling Capacity @ +30°C (W)5980Heater Wattage1000Electrical Requirements (VAC/Hz/Ph/A)230/60/1/21.1Regulatory ApprovalsTUVDownloadsTechnical Specification Download Operator's Manual Download

BioSpherix Xvivo System X2 isolated workstation for cell culture work under controlled conditions. M (more)ultiple incubation chambers, with independent O2/CO2/RH programming. The incubation sub-chambers have doors that open into the area for handling with gloves in an aseptic environment controlled by temperature, O2 and CO2. O2 control from 0.1% to 99.9% is possible in each incubator. Low humidity interior atmosphere in the crop handling chamber that reduces the risk of contamination. Heatable interior atmosphere and work surface. Chambers for housing equipment (microscopes, bioreactors, centrifuges, pipetting stations, refrigerators, lyophilizers, cell sorters, robots, FACS, etc.) also with controlled atmospheres. Control of the O2 level also in the SAS or exchange lock for the input/output of material and samples. Software control on a PC for easy documentation and data logging, even allows remote control. Modular and completely enclosed workstation, without requiring the expulsion or extraction of air. Modular system, can be expanded in the future. The BioSpherix X2 closed incubation system is an attractive cleanroom alternative. With the Xvivo System Model X2, good manufacturing practices are easier to achieve, risk is reduced in many ways, and the speed of implementation is much faster and easier. The Xvivo System X2 model, available through its sister company, Biospherix Medical, is designed to process and produce cells in compliance with regulatory GMPs. The BioSpherix Xvivo System Model X2 is the world's only proven modular cytocentric aseptic containment isolator.

F1 Mass Standard - rectangular weights. Nominal value - 5 kg.

Motic Moticam A8 Microscope Camera Highest Live Display Mode 3840x2160 Pixels (4K) Capture Resolutio (more)n 8MP Maximum Frames per Second (FPS) 30 FPS (15FPS @ 3840x2160) Features - Perfect solution for tiny structures and insights on other stunning preparations - Ideal for documentation and flexible image capturing - Provides higher resolution demanded by advanced technical training areas or education fields - Features state-of-the-art sCMOS imaging unit packed in a high quality metal housing - Fits microscopes with available C-Mount for 1 / 3" sensor size - Still image and video capture - Still image measurement - Image adjustments - White balance - Automatic and manual exposure - Individual objective calibration system The Motic Moticam A Series of microscope cameras are digital cameras ultimately developed and designed for newcomers in digital imaging and young explorers with ambitious goals. For this reason, the newest technologies are hidden in a robust metal housing. It’s simple to use without time consuming training, thanks to the MotiConnect application software. This A8 model of the Moticam A Series is a microscope camera capable of delivering up to 15 frames per second at 3840x2160 pixels per frame, or up to 30 frames per second at 1920x1080 pixels per frame. With its higher resolution capability, the A8 is also ideal for documentation and flexible image capturing. Time is precious and limited. For this reason alone, the Moticam A Series is easy to install and ready for immediate use. When Motic promises all-in-one, they mean that all accessories are included. A calibration slide, eyepiece adapters for any eyepiece tube, a focusable lens and even a macro tube is part of the package. The all-in-one solution for a headstart is the Moticam A Series. The MotiConnect is a free multi-platform toolbox to make the most out of your new Moticam A Series product. Capture, annotate, measure and evaluate using simple to understand and easy to use tools. This free software can also be enhanced by purchasing the more advanced Motic Images Plus 3.1. Click Here to View Product Video INCLUDED: The Motic Moticam A8 Microscope Camera includes: - 30mm and 38mm Eyepiece Adapters - Calibration Slide and Card - C-Ring - Focusable Lens - Macro Viewing Tube - Dust Cap - Power Cord - Manufacturer's Documentation - 5 Year Manufacturer's Warranty