Heidolph Pumpdrive PD 5025 Pump Gear Pump Head ZP-1 Zahnradpumpe Kopf 4000 U/min

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5° - 35° C,  (more)5200W, 230V 60HzDuraChill Chillers provide cooling power for demanding applications and serve as an economical alternative to tap water cooling systems. All models feature a microprocessor-based controller, digital Temperature Display (°C or °F), one-touch set point display, and digital Pressure/Flow Rate Display (PSI, kPa, GPM, LPM) with push-Button selection. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended.Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available INCLUDED: The Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5° - 35° C, 5200W, 230V 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5200W, 230V 60Hz SpecificationsKey SpecificationsDescription1.5 HP Chiller, Positive Displacement; Air-CooledDisplayLEDConnectivityOptional: RS232, RS485Working Temperature Range °C5° to 35°Temperature Stability °C±0.5°Temperature Calibration Capability1-pointPump TypePositive Displacement 60 Hz OnlyPart Number6860P46A270DMaximum Pressure (psi)100.0Maximum Pressure (bar)6.90Maximum Pressure Flow Rate (gpm)3.50Maximum Pressure Flow Rate (l/min)13.2Cooling Capacity @ +10°C (W)4420Cooling Capacity @ +20°C (W)5200Cooling Capacity @ +30°C (W)5980Heater Wattage1000Electrical Requirements (VAC/Hz/Ph/A)230/60/1/21.1Regulatory ApprovalsTUVDownloadsTechnical Specification Download Operator's Manual Download

VACUUBRAND PC 611 Select Chemistry Pumping Unit Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumping (more) Speed 2.2 CFM at 60Hz Number of Heads/Stages 4/3 Features - VACUU-SELECT vacuum controller with graphical user interface simplifies work in the laboratory - Predefined applications save time and give reproducible result - Easy-to-use application editor allows own process sequences - Meets high vacuum requirements for most high boiling solvents - PC 611 Select allows simultaneous operation of two independent vacuum applications with electronic vacuum control This chemistry vacuum pumping unit is an economic space-saving solution for simultaneous operation of two independent vacuum applications with one single pump. Based on our popular MD 4C NT three-stage chemistry diaphragm pump, the PC 611 select is frequently used for vacuum applications involving even high boiling point solvents. This pump has sufficient capacity for parallel operation of two demanding applications. One application is controlled by the VACUU-SELECT vacuum controller, via an electronic solenoid valve. The second application is controlled by a manually controlled diaphragm valve. Both vacuum ports have integrated check valves to protect against cross contamination and interference. The integrated VACUU-SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU-SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, it detects the boiling pressure and switches to 2-point control mode to hold the pressure stable when a boiling point is detected. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage, and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection. INCLUDED: The VACUUBRAND PC 611 Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND MV 10 NT Diaphragm Pump Ultimate Vacuum 0.5 mbar Max. pumping speed at 60 Hz 6.1 cfm Nu (more)mber of Heads/Stages 8/4 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs Four-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases when the need is to reach fractional millibar ultimate vacuums. All parts in contact with pumped vapors or gases are made of aluminum, stainless steel and carefully selected plastics suitable for a wide range of non-corrosive applications. These pumps provide the advantageous combination of high pumping speed with an extraordinary good ultimate vacuum down to 0.5 mbar. The highly flexible, fabric-reinforced double diaphragms made of FKM offer extended operating life. Eight-cylinder NT pumps features quiet operation, smooth and easy to clean surfaces. Four-stage diaphragm pumps are an excellent choice for continuous, contamination-free evacuation and pumping of non-aggressive gases under the very high vacuum demands of applications in physics and analytics. They generate a clean vacuum, as they are designed without any contact seals, hence no abrasion or dust is produced that might creep back into the application. Due to the outstanding ultimate vacuum, these pumps are often used as alternative to rotary vane pumps. A typical application is the use as backing pump for turbomolecular drag pumps. Additionally, the VARIO® design provides vacuum control by precise adjustment of the diaphragm pump´s motor speed. Depending on the application, the demand-responsive motor speed control results in unsurpassed lifetimes of service parts such as diaphragms, as well as optimal performance for backing of turbo pumps.INCLUDED: The VACUUBRAND MV 10 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND MZ 2C NT Chemistry Diaphragm Pump Ultimate Vacuum 7 mbar (5 Torr) Maximum Pumping Speed  (more)1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance - High performance even at low vacuum levels - Optimized vacuum even with gas ballast for condensate purge - Whisper quiet and low vibration - Long diaphragm life, maintenance-free drive system Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. The pump MZ 2C NT is equipped with a gas ballast valve for continuous condensate purge increasing the pumping capability of condensable vapors. This pump is our most popular chemistry diaphragm pump, and is the heart of a family of VACUUBRAND pumping systems. The NT-series features further improved performance data and superior vapor tolerance. Two-stage chemistry-design diaphragm pumps are an excellent choice for applications with corrosive gases and vapors with medium vacuum requirements. They do not consume water and therefore do not produce any contaminated waste water. The media contacted materials made of chemically resistant fluoroplastics open a wide range of applications in chemistry and pharmaceutics. The robust design provides very good durability and long service intervals even in demanding chemistry applications. Typical usages are vacuum generation for rotary evaporators, vacuum concentrators, gel dryers, vacuum ovens and many other laboratory applications. The MZ 2C NT is the powerful basic pump for a complete family of well established and reliable chemistry vacuum systems and pumping units.INCLUDED: The VACUUBRAND MZ 2C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards RV8 Vacuum PumpFeatures - The RV is a truly versatile pump for operation throughout for your (more) operations, perfect for wet applications, dusty applications and clean dry applications. - The RV series of pumps has the highest vapour handling capacity of any rotary vane pump. This is ideally suited for your wet pumping applications such as freeze drying, extraction, filtration and gel drying. - The best-in-class anti-suck back protection prevents dust or oil mist from entering your system. The fast-acting automatic inlet valve acts within 0.4 seconds. - The universal motor in the pump covers the widest possible voltage and frequency range from a single motor. - You can service and replace parts without dismantling the pump mechanism. All parts self-align, eliminating the need for special assembly. Pump valve has "controlled" opening on power startup so that the system vacuum will never see a pressure surge on startup The RV uses a high-quality "universal" motor to cover the widest possible voltage and frequency range. A one-size Allen key is used to dismantle all parts of the RV pump. All rotor and stator parts are completely interchangeable The RV series of small oil sealed rotary vane pumps deliver excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. With over 300,000 units produced, these pumps offer proven performance that sets the industry standard for R&D and scientific pumping applications. All RV pumps are approved to UL and CSA standards by an external test house and feature our unique mode selector switch, meaning one model is suitable for both high vacuum or high throughput applications.Click Here to View Product Video INCLUDED: The Edwards RV8 Rotary Vane Vacuum Pump includes: - Edwards Ultragrade 19 Oil - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

S+B 3 Drawer cabinet low Ice blue 600

Sedgwick TA400 Table Saw with P&J Extractor Unit This system was removed from a university lab w (more)here it was surplus to requirements. The units are in good used cosmetic condition, showing typical signs of use. Both units are three-phase and run as expected. The system includes:- 1 x Sedgwick TA400 Table Saw - The saw operates smoothly and quietly. - Both emergency stop buttons function, with a brief deceleration before fully stopping. - Specs: - 400 mm saw blade - Tabletop dimensions: 900 mm W x 1120 mm L (without extension), 1720 mm W x 1120 mm L (with extension) - 1 x P&J PJDMV2.5-WT-1.5-3I Extractor Unit - The extractor runs efficiently alongside the saw, providing reliable dust extraction. Model: TA400

Varian 940-LC Liquid Chromatograph & 440-LC Fraction Collector with 445-LC & PC This system  (more)was removed from a university lab where it was surplus to requirements. All included units are in good cosmetic condition and power on, we are unable to test them further as a system at our facility. User login information is available on request. The system comprises the following: Varian 940-LC Liquid ChromatographSN - LC0904M018Sample Block Holds 200 x 5ml tubes Varian 445-LC Scale-Up ModuleSN -LC0904M025 Varian 440-LC Fraction CollectorSN - AY0902M019 Dell Optiplex PCDell 17" MonitorDell Mouse & KeyboardVarian Galaxie Chromatography Software Version 1.9.302.952

Eppendorf 4 x 30-50ml Adapters, Cat. # 022638386 The Eppendorf 4 x 30-50ml Adapters, Cat. # 02263838 (more)6 are for use with the Eppendorf A-4-62 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 4 x 30-50ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 31mm x 115mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 4 x 30-50ml Adapters, Cat. # 022638386 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 4 x 30-50ml Adapters, Cat. # 022638386 SpecificationsBottom ShapeFlat with Rubber MatRotor CompatibilityEppendorf A-4-62 Swing Bucket Rotor