Edwards E2M28 Vacuumpump

Laboport SD N 860.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automat (more)ic condensate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 60 l / min Final vacuum (max.) 4 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Centrifugal concentration Distillation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA VACSTAR Digital Vacuum Pump Maximum Flow Rate 22 L/min (1.32 m^3/h) Final Pressure 2 mbar Sucti (more)on Levels 4 Features - High suction capacity of the four-chamber membrane vacuum pump - Requires low space due to compact design - High serviceability features for ease of maintenance - Parameters are adjustable via a rotary-push button - Digital display indicates current rpm (rotations per minute) - Automated processes managed by the optional vacuum controller VC 10 - Includes analogue cable for pump-controller connection - VSE 1 vacuum safety emission recommended for additional security: Prevents solvent release into the environment - Ideal for dry and oil-free applications in laboratory settings - Membranes feature high chemical resistance The four-chamber membrane vacuum pump convinces with its high suction capacity, low space requirement and high serviceability. The setting of the parameters is carried out through a rotary-push button over a digital display showing current rpm. Automated processes are controlled with the vacuum controller VC 10, which is available as an accessory. An analogue cable which is required for connecting pump and controller is included in the delivery of the pump. Additionally it is recommended to use the VSE 1 vacuum safety emmission. It prevents that solvents are released into ambient air. The Vacstar digital is used for dry and oil-free applications in the laboratory. The membranes of the pump are particularly chemical resistant. INCLUDED: The IKA VACSTAR Digital Vacuum Pump includes: - Vacuum hose (1 m) - Silencer - USB A-B Cable - Connecting Cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA VACSTAR Digital Vacuum Pump Specifications Pump rate max. (50/60Hz)1.32 m³/hPump rate max. (50/60Hz)22 l/minFinal pressure without gas ballast2 mbarSuction levels4Cylinder4Connection diameter suction side8 mmConnection diameter pressure side8 mmInput pressure2 - 1030 mbarTwo-point controlyesAnalog speed vacuum controlyesSpeed controlTurning knob Speed range285 - 1200 rpm DisplayLED Noise at low. pressure54 dB(A)Material in contact with mediumAl2O3; PTFE; FFPM; PPS; NBRHousing materialalu-cast coating / thermoplastic polymerMode automaticyesMode manualyesMode pump %yesMode programyesDimensions (W x H x D)150 x 375 x 370 mmWeight11.5 kgPermissible ambient temperature5 - 40 °CPermissible ambient conditions80% (up to 31°C), decreasing linearly to max. 50 (@40°C)Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input130 WPower input standby3 W

Dimensions (H x W x D): 390 x 340 x 600 mm

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Heidolph Rotavac Vario Tec, 115VFor Hei-VAP Expert Control / Hei-VAP Ultimate Control. Recommended f (more)or solvents with low or medium boiling points. Condenser is not in scope of delivery. Features: - Highest distillation rates possible and reducingprocess time by 30% - Solvent recovery of up to 99% - Once the required vacuum is reached, thepump automatically stops and reliably keepsthe vacuum at the desired level - Minimized runtime saves energy andsignificantly increases the lifespan of thediaphragm - These pumps guarantee minimum noise andvibrations during operation - Rpm-regulated pumps achieve the mostprecise vacuum INCLUDED: The Heidolph Rotavac Vario Tec, 115V includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Temperature range: Ambient + 5°C to 50°C Digital Temperature Control Dimensions (WxDxH): 765 x 800 x (more) 2150 mm Internal dimensions (WxDxH): 530 x 630 x 1450 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW