Cole-Parmer easyload pump head

VACUUBRAND MV 10C NT Chemistry Diaphragm Pump Ultimate Vacuum 0.9 mbar / 0.68 torr Maximum Pumping  (more)Speed 5.6 CFM at 60Hz Number of Heads/Stages 8/4 Features - Outstanding chemical resistance and superior vapor tolerance - Reduced process time due to very high flow rates even close to ultimate vacuum - Very low vibration and quiet - Excellent ultimate vacuum even with gas ballast - Excellent environmental friendliness due to efficient solvent recovery (on models with EK accessory) Four-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet the highest requirements. The four-stage design of the eight-cylinder pump MV 10C NT provides the advantageous combination of high pumping speed and very low ultimate vacuum of 0.9 mbar in a very compact design. All internal parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. Upgraded with an exhaust waste vapor condenser (EK) the MV 10C NT +EK provides an excellent, environmentally friendly system with efficient solvent recovery. A separator for the inlet (AK) made of glass (with protective coating) against particles and liquid droplets is available as an optional accessory. The high pumping speed and excellent ultimate vacuum of the MV 10C NT reduces the process time significantly. The pump meets the high vacuum requirements, e.g., of parallel processes in vacuum networks. Further typical applications are vacuum ovens, large rotary evaporators, pilot plants and mini plants as well as kilo laboratories. For rough operating conditions we recommend an inlet separator (AK) to protect the pump from particles and liquid droplets. The exhaust waste vapor condenser on the MV 10C NT +EK (also available as accessory) enables near-100-percent solvent recovery, efficient recycling, and active protection of the environment. INCLUDED: The VACUUBRAND MV 10C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF LABOPORT N 820 G Diaphragm Pump Ultimate Vacuum 6 mbar Maximum Flow Rate 20L/min (1.2 m3/h) Pro (more)tection Class IP30 Features - 100% oil-free transfer – thereby pure transferring, evacuation and compression of gases - High level of vapor and condensate compatibility - Ideal for extremely aggressive/corrosive gases and vapors - ATEX compliant according to II 2/-G IIB+H2 T3 internal atmosphere only - Integrated gas ballast valve - Separators and/or condensers can be purchased individually at any time and easily fitted, enabling users to build their own customized vacuum system - 3-color status display for in operation, stand-by, and error - Integrated rotational speed control - Environmentally friendly - Start against ultimate vacuum of the pump The KNF LABOPORT N 820 G Diaphragm Pump is an exceptional choice for laboratory applications, boasting a chemically resistant, compact design. This oil-free pump ensures pure transferring, evacuation, and compression of gases, thanks to its 100% oil-free operation. It is especially suitable for handling extremely aggressive or corrosive gases and vapors, highlighting its high vapor and condensate compatibility. The pump features manual speed control, allowing users to tailor the pump capacity to specific needs, and an integrated gas ballast valve for enhanced performance. Constructed with PTFE/TFM heads, PTFE-coated diaphragms, and FFPM valves, it ensures durability and reliability in demanding environments. Additionally, the pump is ATEX compliant for internal atmospheres, ensuring safety in hazardous conditions. It offers the flexibility to add separators and/or condensers individually, allowing users to customize their vacuum systems. The 3-color status display indicates operation, stand-by, and error modes, while the integrated rotational speed control adds to its user-friendliness. The pump's ability to start against the ultimate vacuum and its environmentally friendly design further enhance its appeal for a wide range of laboratory applications. INCLUDED: The KNF LABOPORT N 820 G Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards nEXT930D - CF200 NW25 Turbomolecular Pump Ultimate Vacuum <6x10-10 mbar Inlet Connection  (more)DN 200 CF Pumping Speed Nominal 52,200.00 l/min Features - Delivers fast nitrogen pumping speeds, making it suitable for demanding applications - Designed for R&D, coating, heat treatment, furnace applications, and more - Offers variants for specific needs, including standard, high light gas compression, and regenerative stages - Compatible with TAG and TIC controllers for easy system integration - Allows for field replacement of oil cartridges and bearings with minimal tools - Provides powerful performance in a space-efficient design - Operates efficiently in any orientation, offering versatility in installation - Magnetic bearings reduce vibration, ensuring a stable vacuum environment - Optimized for high-speed and high-compression applications nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.nEXT930With the nEXT930 turbomolecular pumps Edwards provides a larger pump offering nitrogen pumping speeds of 925 l/s.Features and Benefits - Upper magnetic bearing - ensures clean vacuum, low power and low vibration. - Optimised rotor designs - deliver high speeds and high compression. - Range of variants suitable for many applications - D = standard nEXT pump variant, H = optimised rotor design for high light gas compression and T = additional regenerative stage for increased compression and higher backing pressure capability - Integrated controller / electronics - offers direct I/O or serial control or can be connected to one of our TAG or TIC controllers for easy systemisation. - Fully user serviceable - oil cartridge and bearings can be changed in the field with minimal tooling. - Inlet screen - supplied as standard INCLUDED: The Edwards nEXT930D - CF200 NW25 Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nEXT240T HC - ISO100 160W Turbomolecular Pump Ultimate Vacuum <6x10-8 mbar Inlet Connecti (more)on DN100CF Pumping Speed Nominal 0.240 m³/s Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for improved performance - Offers direct I/O or serial control; compatible with TAG and TIC controllers for system integration - Oil cartridge and bearings can be replaced in the field with minimal tools - Features multiple drag stages for enhanced compression ratios and increased backing pressure tolerance - Suitable for a variety of demanding applications including high-energy physics, electron microscopy and industrial development - Features a patented bearing suspension system to reduce noise and vibration transmission to the vacuum system - Includes a purge port for safe operation with specialized gases - The permanent magnet upper bearing ensures a hydrocarbon-free environment, reducing contamination The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.INCLUDED: The Edwards nEXT240T HC - ISO100 160W Turbomolecular Pump includes: - One Year Manufacturer's Warranty

The peristaltic pump of the Cole Parmer type Masterflex is ideal for pumping corrosive, abrasive and (more) viscous liquids without damaging the pump. The Cole Parmer Masterflex can also be used in the pharmaceutical and biopharmaceutical industry. Speed: 6 – 3000 rpm Excluding pump head

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Quattroflow Fluid Systems 1200 Quaternary Diaphragm Pump QF 1200-SU This was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up and is in working order. It is in good cosmetic condition with minor marks. 12cm Diaphragm2200 RPM Model- Quattroflow CVSerial number- 673786

Samples and applications - Preparation of foamy mixtures (ice cream, butter, margarine, icing) and s (more)preadable creams    - Preparation of tablet coatings - Preparation of ointments and pharmaceutical creams - Preparation of cosmetics (lip balm, soap, shampoo, conditioner, creams, lipstick, mascara) - Preparation of pigments, inks and paints - Preparation of biodiesel - Dispersion of petroleum derivatives (e.g. asphalt) TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 25 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 100 - 2,500 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 23.6 m/s - Ultimate fineness, emulsions: 1-5 µm - Ultimate fineness, suspensions: 5-25 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Hermle 500ml insert for Z496-1000-RBUK 2/pk The Hermle 500ml insert is a specially designed accessor (more)y for use with the Hermle Z496-1000-RBUK rectangular buckets. This insert comes in a pack of 2 and is capable of accommodating tubes with a maximum diameter of 99mm and length of 152mm. With a maximum capacity of 500ml per adapter, this insert allows for efficient processing of large sample volumes. The compatibility with Hermle Z496-1000-RBUK rectangular buckets makes this insert a versatile addition to any laboratory looking to improve their sample processing workflow. The use of this insert ensures that tubes are securely held in place during centrifugation, preventing any sample loss or contamination. INCLUDED: The Hermle 500ml insert for Z496-1000-RBUK 2/pk includes: - Set of 2 Adapters - Manufacturer's Documentation - 2 Year Manufacturer's Warranty