Watson Marlow 323Dz Peristaltic Pump

This listing is for a Scilog Tandem 1081 Peristaltic Pump. The unit is in full working condition an (more)d is ready for intimidate realese.

This listing is for 1 of 3 Watson Marlow SCIQ 323 Peristaltic Pump. The unit is in full working con (more)dition and is ready for immediate release. The Sci-Q 323 range is designed exclusively for scientific pumping needs, and brings a stunning level of performance and quality to the bench top.   323S high-performance manual control variable speed pump • High-performance microprocessor controlled pumps • 323S can be extended with 313X extension pump heads to five channels • Flow rates to 2000ml/min and 133:1 speed control ratio   323S speed adjusts in 1rpm steps from 3 to 400rpm. keypad lock prevents tampering or accidental changes, auto restart for mains failure recovery, switchable between 100-120V or 220-240V, MemoDose facility for accurate single shot dosing.   323S drives may also be fitted with 314 four roller pump heads if lower pulsing is required, or with 313D2 or 314D2 pump heads which accept 2.4mm wall thickness tubing for higher pressure operation or pumping more viscous fluids.   For low-flow pumping, up to ten channels, 323S drives may be fitted with 314MC (four-roller) micro-cassette pump heads, which can be extended to ten channels by adding one 314MCX or 318MCX extension pump head. This pump is fitted with one 314MC head and will be supplied with an additional spare 314MC as per images   Serial# H041702   Dims 27cm (D) x 22cm (W) x 12cm (H)

The Watson Marlow 405 Pump provides users with digital control over a two-channel precision pump. Th (more)is high flow laboratory pump has a speed range up to 200 rpm with a flow rate up to 370ml/min per channel. This microprocessor controlled, dual channel peristaltic pump is easy to control from the upfront digital keypad, allowing users to start, stop, reverse direction, control speed level, and initiate rapid priming. This digital lab pump is built for use with 1.6 mm tubing in sizes 12, 13, 14, & 16 (0.5 – 64.8 mm bore) and spring-loaded track to maximize tube life and flow precision against pressures up to 2 bar. The pump comes with pumphead designed with twin four roller rotors, spring loaded track, and adjustable occlusion lever allowing two individual channels of flow.

220-240V, 50-60 Hz, 16W

This Watson Marlow 205S Peristaltic Pump was removed from a university lab where it was surplus to r (more)equirements. The unit powers on and is in good cosmetic condition with minor marks from use. All buttons are responsive to the unit.

Gilson MINIPULS 3 Peristaltic Pump (Drive Unit Only), 110V/220VFeatures - Utilizes positive displace (more)ment pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds the MINIPULS 3 is exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateMINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible. (Please Note: A Pump Head is NOT INCLUDED and is required for operation, please inquire.) INCLUDED: The MINIPULS 3 Pump (Drive Unit) with One Channel, Standard Flow Head (R1) includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

ZWIEBEL calibration weight 100g class F2 INOX Stainless steel laboratory calibration weight Brand: Z (more)WIEBEL Weight: 100 g Type / class: F2 maximum permissible error: ± 1.6 mg Weight checked on a precision balance at 0.01 g (10 mg) - see photo In its plastic box uncalibrated weight

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

OHS are designed to ensure the highest safety standards. The resistant sealed case and the IP 54 deg (more)ree of protection guarantee durability over time even in the most aggressive environments. Continuous trouble-free operation in your lab, backed by a 3-year extended warranty. Constant torque at any speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional shaft stirrer and VELP OHS Series shaft stirrers. Thanks to the SpeedServo feedback system, the torque remains constant at any speed, even at maximum. Always having a constant torque is a very important parameter for the reproducibility of the analyses. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod drop into the liquid? SmartChuck™ technology makes this activity quick and easy with just one hand and no special accessories. Two simple movements allow you to unlock the protective ring and remove or replace the stirring rod. If the protection ring is opened during the analysis, the instrument interrupts the stirring, showing a safety message on the display. Maximum Protection and Security OHS Advances guarantee the highest safety standards. The IP54 degree of protection ensures maximum protection of the instrument from corrosion and high performance in challenging work environments. The stirring is activated through pressure, avoiding involuntary start-ups and the set speed is reached gradually. The large number of sensors and safety controls deactivate the stirring in case of overload, overheating or short circuit. Integrated Timer to Schedule Your Activities The OHS Digitals are equipped with timers that allow you to program the stirrer according to your needs and to carry out the reactions independently. Setting the timer is quick and easy, just press the dedicated button and select a time interval between 1 min and 99:59 hours. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS DIGITAL MODELS A - 7 Segment Display LED B - Torque indicator bar C - Low speed LED (only OHS 200) D - Gear key (only OHS 200) – Timer key for other models E - High speed LED (only OHS 200) – Timer LED for other models F - Speed control knob G - Timer LED (for OHS 200) - Upper lock LED for other models H - Timer key (for OHS 200) – Lock key for all models I - Lower Lock LED J - Main switch K - Smart chuck

MYA 5.5Y.F1 Microbalance for Filters Microbalances for filters are high-precision laboratory balance (more)s designed for accurate filter weighing in analytical, pharmaceutical, environmental and many other laboratories. With ultra-precise mechanisms and state-of-the-art technology, these microbalances provide reliable results essential for research and control processes. High Precision Microbalances for filters provide exceptional measurement accuracy crucial during quantitative and qualitative analysis of samples. They can weigh with microgram readability, allowing precise monitoring of filter mass before and after analysis. High-tech microbalances for filters provide stable and repeatable results. State-of-the-art measuring systems minimize the influence of ambient conditions on weighing results. Applications Environmental Laboratories Air, water and soil quality analysis requires precise filter weighing used to collect samples. Microbalances for filters are an indispensable tool in such research. Pharmaceutical Industry In production and control processes in the pharmaceutical industry, weighing accuracy is crucial. Microbalances provide the necessary precision for process monitoring. Scientific Research In research laboratories where advanced studies of new materials, chemicals or biological processes are conducted, microbalances for filters provide the dependability and accuracy needed for reliable results. Do you need a balance that not only determines weight with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

E1 class mass standards are characterized by the highest precision in terms of mass. The allowable d (more)eviation from the actual weight is minimal, making standards of this class ideal for applications where every milligram matters. Product Features: Varied Standards: The set consists of 12 wire standards and 17 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 brushes, 2 tweezers and gloves, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant wooden box, ensuring their safe storage and transportation. *The mg unit mass standards are wires.