Foss Tecator FIAstar 5000 Analyzer With 5027 Sampler Lab

This Hewlett Packard / Agilent 1100 Series HPLC G1313A Autosampler was removed from a university lab (more) where it was surplus to requirements. The item is in good cosmetic condition and powered up. When powered up, the item ran a start-up self-test that displayed the motor in good working order, we are unable to test this item further at our facility.

This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab  (more)where it was surplus to requirements. Everything powers up and the system is in good cosmetic condition with some marks from use. There appears to be an issue with at least one of the injectors. When we attempt to 'home' the robot head it will start to home the various parts, then stall and with an error code 'error homing: Y2 Axis error: Motion error; the axis was unable to perform the specified move. (0100) We believe the issue is with the #2 injector side-to-side motor. The up-and-down motor appears to run well. This error makes it impossible to home the system. So it could not be tested any further. The system comprises of; 1 x Beckman Coulter Biomek NXp Laboratory Automation WorkstationCat no. A31840Unit dimensions - W77 L92 H98cm 1 x IBM ThinkCentre PCMT-M 8113-DA1Biomek Software Version 3.3 installed. 1 x Lenovo MonitorType - 9227-AC1 1 x Lenovo Keyboard 1 x IBM Mouse 2 x Nalgene 2 Gallon Waste/Supply Bottles Box of Accessories:-Beckman Coulter AccuFrameBeckman Coulter Vacuum Valve UnitPower AdaptorVarious cables8 x 2ml Tube holders (24 tube slots in each)94 x 2ml tubesVacuum Manifold Base23mm Spacer Collar PN 71975136mm Collar3 x Thermo Scientific 96 well 0.2ml plates.

Interscience Spiral easySpiral Pro Automatic Spiral Plater This was removed from a university lab wh (more)ere it was surplus to requirements. The item powers on and appears to run through test sequences. The item is in a reasonable, used cosmetic condition with marks from use.

TSP HPLC P4000 + AS3000

Magnetic stirrer AREC.X 7 Precise and accurate thermoregulation for better reproducibility AREC.X 7  (more)is equipped with state-of-the-art heating plate technology, designed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. The AREC.X 7 can be connected to the external Pt100 probe or to the VTF for precise thermoregulation of the fluid. The probe guarantees thermoregulation up to 250°C, with an accuracy of ± 1.0°C, while the VTF guarantees excellent thermoregulation performance up to 300°C and an accuracy of ± 0.5°C. The VTF is equipped with a timer, for unsupervised operation and increased productivity. Powerful stirring for your lab reactions You can rely on the AREC.X 7 for demanding laboratory reactions, as it agitates volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. Absolute safety and ease of use for laboratory operators The AREC.X 7 hotplate stirrer guarantees a superior level of safety and protection for laboratory operators, since it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic soleplate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. Save time with the new control panel Thanks to the digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood. MAXIMUM TEMPERATURE PRECISION The VTF thermoregulator is ideal for multiple applications and satisfies the most demanding requirements in terms of accuracy, reliability and flexibility of use. Thanks to the innovative FUZZY LOGIC technology, it automatically adapts the thermoregulation to various factors such as power, load and heat dispersion. The VTF guarantees premium performance in terms of temperature control: it allows a better alignment with the set point temperature (with an accuracy of ± 0,5°C.) and a lower initial 'overshoot' (initial deviation with the set temperature) . DIGITAL TIMER It will be possible to select up to a maximum operating time of 24 hours and 59 minutes, after which the instrument will automatically switch off the thermoregulation. COMFORT Thanks to the unique Velp design, the installation of the VTF on the support rod will be very simple and will help the positioning of the Pt100 probe in the different containers. The two clamps allow for height and horizontal adjustment.

Bio-Rad Phd System laboratory analyzer for parts BIORAD PHD Without a computer For pieces

Ohaus STX2202 Scout STX Electronic BalanceIdeal for laboratory & industrial applications, the OH (more)AUS Scout features an easy to navigate color touchscreen display & a slim design which allows stackable storage. Geared for superior performance with fast stabilization time and high resolution weighing results, these portable balances set a new standard for a broad range of weighing applications. Features also include superior overload protection and expanded connectivity options. Large, resilient color touchscreen allows for effortless operation of the Scout through its informative icon driven menu structure, guiding the user through every step of the weighing application. Stabilization time as fast as 1 sec means increased productivity in your facility. Equipped with advanced weighing technology, the Scout also ensures repeatable and reliable weighing results. Integrated superior overload protection system rated at 10 times the capacity protects the balance in rugged and demanding environments. The space-saving, slim design allows for stackable storage. With expanded connectivity options including RS232, USB Host, USB Device, Ethernet and Bluetooth®, the Scout provides added versatility to your data collection and transfer needs. Click Here to View Product Video INCLUDED: The Ohaus STX2202 Scout STX Electronic Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark MyTemp Mini Digital Cooling Incubator With digital temperature control, the MyTemp incubat (more)ors provide convenient “set and walk away” operation, eliminating the need for external thermometers and repetitive “fine tuning” of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up or cool down while accurately monitoring the chamber temperature and conveniently displaying the temperature in real time on the large LED control panel. Despite a modest footprint of 14.5" x 13″, the MyTemp incubators feature large internal chambers, capable of storing flasks and bottles up to 2 liters. In addition, the incubators include two adjustable shelves and an internal outlet for powering small shakers, rockers and other instrumentation. A mini nutating rocker (supplied with both flat and dimpled mats) is available for agitation of samples during incubation. INCLUDED: The Benchmark MyTemp Mini Digital Cooling Incubator includes: - Two Adjustable Shelves - Internal Outlet - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Potteau Plinth cabinet L. Gray 900x500x650