Buchi Mini Spray Dryer B-290 Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

This listing is for 1 of 2 Watson Marlow 520S Peristaltic Pump. The unit is in full working conditi (more)on and is ready for immidate realese. Peristaltic pumps are the simplest possible pump, with no valves, seals or glands to clog or corrode. The fluid contacts only the bore of a tube, eliminating the risk of the pump contaminating the fluid, or the fluid contaminating the pump. Peristaltic pumps can operate dry without risk. Easy to install, simple to operate and inexpensive to maintain, peristaltic pumps are ideal for most fluids, including viscous, shear-sensitive, corrosive and abrasive fluids, and those containing suspended solids. Suitable for metering, dosing and dispensing applications.   520S drive offers manual control via a large-key membrane keypad: speed adjustment; run and stop; forward/reverse; "Max" key for rapid priming and purging.   Supply voltage/frequency: 100-120V/200-240V 50/60Hz Flow rates from 4 microliters/min up to 2.4 liter/min Precise 2,200:1 speed control range from 0.1 to 220 rpm in 0.1 rpm increments Large speed/flow display and easy to use tactile membrane keypad. Incorporates keypad lock Manual control and flow rate calibration MemoDose for accurate single shot dispensing

GILSON MiniPuls 2 Peristaltic Pump 1 channel only Voltage: 220-240V, 50/60Hz Standard flow rate: 0.3 (more) µL/min – 30 mL/min at maximum pressure 0.5 MPa Continuous flow Forward and reverse movement.

Heidolph Outlet instrument*. 12 months warranty. *Heidolph Outlet instrument can be overstocked item (more), returns, demo instrument etc. They are checked by Heidolph and in a 100% functional condition. Profit from great savings thanks to slight optical defects. - Recommended for standard applications - Convex rollers do not squeeze or crush organic cell cultures - Pump head features ball bearings - Rollers made of stainless steel and polyamide - For tubes with a 1.6-mm wall thickness (wt) - Depending on drive and tubing, the flow rate ranges from 2.0 to 4,151 ml per minute

Heidolph Hei-FLOW Expert 120 Peristaltic Pump Package w/ Adaptor for Multi-Channel Pump Heads The pu (more)mp drive of the model 01 of the Hei-FLOW Expert series can be operated with either single-channel or multi-channel pump heads. The flow rates with single-channel pump heads are in the range of 0.38 — 813 ml/min; with multi-channel pump heads from 0.005 — 329 ml/min.By integrating an analog interface, it is possible to control all functions externally. In addition, an optional foot switch can be adapted to enable dosing by foot pressure. Hands thus remain free to perform other work, for example, to hold the tubing and the vessel.A speed of 5 — 120 rpm with a control accuracy of ±3.5% guarantees optimum process results. Features:- Increase your throughput by running up to 12 individual cassettes on one single pump drive and pump head system - Separate metering into multiple vessels with different feed rates in a single operation by using different tubing dimensions to adjust flow rate - Save time: tubing change is done in just seconds - In addition to standard pump heads which feature a 4-roller system you can choose 8-roller pump heads for low pulsation - Change your cassettes easily, even during operation – there are no restrictions - Cassette adjustments and changes are simple, just click in place - No additional purchase of a pump drive needed: upgrade your single-channel pump drive with just one adaptor for multi-channel use and pick the head/cassette configuration that matches your application needs Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Expert 120 Peristaltic Pump Package w/ Adaptor for Multi-Channel Pump Heads includes: - Heidolph Expert 120 Peristaltic Pump - Adaptor for Multi-Channel Pump Heads - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

The peristaltic pump of the Cole Parmer type Masterflex is ideal for pumping corrosive, abrasive and (more) viscous liquids without damaging the pump. The Cole Parmer Masterflex can also be used in the pharmaceutical and biopharmaceutical industry. Speed: 6 – 3000 rpm Excluding pump head

The Cole Parmer type Masterflex L/S hose pump is ideal for pumping corrosive, abrasive and viscous l (more)iquids without damaging the pump. The Cole Parmer Masterflex L/S can also be used in the pharmaceutical and biopharmaceutical industries. This hose pump can be used in combination with the L/S 15, L/S 24, L/S 35 and L/S 36 hoses. Speed: 10 – 600 rpm Pump head type: 77200-62 Hose range: L/S 15: 1100ml/min L/S 24: 1800ml/min L/S 35: 2600 ml/min L/S 36: 3400 ml/min

MVE CryoShipper 8.5 ltr Lab This item was removed from a university where it was surplus to requirem (more)ent. It is in good cosmetic condition, we are unable to test it at our facility. Neck Opening in (mm): 8.50 (216.0)Overall Height in (mm): 21.5 (546)Outside Diameter in (mm): 14.50 (369) ShipsLog 3 Temperature Lid fitted.The data log is not included. Last calibrated: 04:01:2021.Last serviced: 04:06:2021.

Thermo Scientific HERA Freeze HDE Series This was removed from a university lab where it was surplu (more)s to requirements. The unit powers up and is in good working order. It was tested with a digital thermometer (not included). It is in reasonable cosmetic condition with marks from use.

VACUUBRAND Oil Mist Filter for RE 2, RZ 2, RE 2.5, RZ 2.5, RE 5, RZ 5, RE 6, and RZ 6 Permissible Fl (more)ow Rate 6 m3/h Catchpot Volume 180 ml Ambient Operating Temperature 10°C to 40°C Features - Very high degree of separation - Optimal control by transparent catchpot - Easy draining of oil - Direct mounting on the oil reservoir outlet - Integrated pressure relief valve for burst protection in case of blocked filter The VACUUBRAND Oil Mist Filter is designed to efficiently eliminate nearly 100% of oil mist from exhaust gases emitted by oil-sealed rotary vane pumps, enhancing the work environment and preventing exposure to harmful aerosols. This filter is compatible with multiple VACUUBRAND pump models including RE 2, RZ 2, RE 2.5, RZ 2.5, RE 5, RZ 5, RE 6, and RZ 6. Featuring an easy-to-mount outlet connection and a DN 10 mm hose nozzle inlet, it supports a maximum volume flow rate of 6 m³/h. The filter also includes a volume catchpot with a capacity of 180 ml. For applications involving solvents, ceramic filter elements are available upon request to extend the filter’s lifespan. INCLUDED: The VACUUBRAND Oil Mist Filter for RE 2, RZ 2, RE 2.5, RZ 2.5, RE 5, RZ 5, RE 6, and RZ 6 includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA C-MAG HP 7 Hot Plate Heating Temp. Range 50°C to 500°C Volume Max. 10 l Setup Plate Material Cer (more)amic Features - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns!! - Exact temperature setting via digital display (LED) - Bushing according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5, enables precise temperature control - Digital error code display - Elevated control panel for protection against leaking liquids The IKA C-MAG HP 7 Hot Plate features a ceramic glass surface offering excellent chemical resistance and a fixed safety circuit of 550 °C with a Hot Top indicator to prevent burns. It allows for precise temperature control from 50 to 500 °C via a digital LED display and a turning knob. The hotplate includes a bushing for connecting an external thermometer like the ETS-D5, ensuring accurate temperature management. Additional features include a digital error code display and an elevated control panel for protection against leaks. With a heat output of 1000 W and a heating rate of 5 K/min, it supports volumes up to 10 liters. The unit measures 220 x 105 x 330 mm, weighs 5 kg, and operates efficiently within a permissible ambient temperature range of 5 - 40 °C.

IKA C-MAG HP 10 Hot Plate Heating Temp. Range 50°C to 500°C Volume Max. 15 l Setup Plate Material Ce (more)ramic Features - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns!! - Exact temperature setting via digital display (LED) - Bushing according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5, enables precise temperature control - Digital error code display - Elevated control panel for protection against leaking liquids The IKA C-MAG HP 10 Hot Plate features a ceramic glass surface offering excellent chemical resistance and is equipped with a fixed safety circuit of 550 °C and a Hot Top indicator to prevent burns. It allows precise temperature control from 50 to 500 °C via a digital LED display and a turning knob, with a set temperature resolution of 10 ±K. The hotplate supports volumes up to 15 liters and has a heat output of 1500 W with a heating rate of 5 K/min. It includes a bushing for connecting an external thermometer like the ETS-D5 for precise temperature management. Additional features include a digital error code display and an elevated control panel for protection against leaks. The unit measures 300 x 105 x 415 mm, weighs 6 kg, and operates within a permissible ambient temperature range of 5 - 40 °C.

Temperature range: Ambient +4°C to 50°C Temperature control increment: ±0.1°C Temperature stability  (more)at 37 °C: ±0.1°C Temperature uniformity: ±0.25 °C at 37 °C (in flask media) High temperature disinfection (HTD): 120 °C CO2 range: 0.2 to 20 % CO2 control increment: ±0.1 % CO2 stability at 5 % CO2: ±0.2 % CO2 uniformity: ±0.1 % Speed range: 25 to 400 rpm Available program modes: Constant speed and temperature Display: touchscreen interface Audible and visual alarms: yes Dimensions (WxDxH): 875 x 730 x 850 mm Capacity: 170 L Weight: 152 kg