Biobase BJPX-I Series

Vortex stirrers with Ohaus microplate The high speed and small orbit make these mixers perfect for m (more)ixing microplates effectively. All models are designed for continuous laboratory operation. Analog models: economical alternative for simple mixing; controls: knob adjustment. Digital models: timer and exact speed control for applications requiring repeatable results; controls: Touch / Standby / On switch; LED display for speed and time, buttons for adjusting default values. Single or double holders for microplates are available as accessories. - Safety with high-speed mixing: the exclusive accessory locking system allows the mixer to operate safely over the entire speed range. - High quality motor that allows continuous operation and load capacities up to 1.1 kg. - Effective speed control, from low rpm for gentle shaking to vigorous, high-speed, vortex mixing for difficult samples. The product includes: Small cup (code 30400210) Microplate support (Single) (code 30400215) Applications ELISA tests, PCR preparations, digestions, cell destruction Display Independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models), and marked knobs for variable speed control (analog models) Operation Detachable three-wire cable and plug (included) Communication N / A Structure Cycoloy Not sure which agitator to choose? Download the Vortex Shaker Selection Guide to get a quick overview of all available models.

Light source: High energy xenon flash lamp Detector: Silicon photodiode Wavelength selection: Single (more) High-Speed Monochromator Wavelength range: 200 – 1000 nm, selectable in 1 nm steps Wavelength accuracy: ≤0.8 nm Wavelength reproducibility: ≤0.5 nm Bandwidth: Fixed, 3.5 nm Measurement range (OD): 0 – 4 OD Measurement time (96-well plate, 1 flash): <14 seconds Measurement time (384-well plate, 1 flash): <30 seconds Fast Scan (200 – 1000 nm, 1 nm steps): <5 seconds OD accuracy (0 – 0.8 OD, 96-well plate): ±0.008 OD OD accuracy (0.8 – 2.5 OD, 96-well plate): <±1.0% OD accuracy (2.5 – 3.0 OD, 96-well plate): <±1.5% OD accuracy (at 260 nm): ≤0.5% OD precision (0 – 1.2 OD, 96-well plate): <±0.006 OD OD precision (1.2 – 3 OD, 96-well plate): ±0.5% OD precision (at 260 nm): ≤0.2% OD linearity (0 – 3 OD, 96-well plate, at 260nm): R-2 > 0.999 OD uniformity (96-well plate, at 1 OD): <3% Sample formats: SBS standard microplates from 1- to 384-wells,NanoQuant low-volume plate Microplate shaking: Linear, orbital and double orbital shaking; variable amplitudes and frequencies Stirring speed regulation: 50 – 1000 rpm Lid lifting system – maximum height of microplate and lid: 24.5 mm Temperature control – heating range: Ambient +4°C up to 42°C Temperature control – uniformity: <0.5°C at 30°C and 37°C at incubation position Dimensions (WxDxH): 494 x 557 x 395 mm Weight: 40 kg Software included

Thermo Scientific platform for MaxQ 3000/5000 shaker New equipment in its original packaging Without (more) clamps

PT0439 cable is used for connecting PUE 5, PUE HY10, PUE HX7 and PUE H315 stainless steel terminals  (more)and indicators via RS 232. Standard length: 2 m

The Innova CO-170 CO₂ incubator is designed to provide stable and homogeneous atmosphere required fo (more)r cell culture by controlling temperature, carbon dioxide and optionally oxygen for cultivating samples and cells from biological laboratories. The fan-less design offers more usable space and eliminates the fan, reducing contamination. A six-sided direct heating system provides a uniform incubated environment to gently bathe cells, and the deep-drawn, stainless-steel chamber eliminates seams or welds and allows easy cleaning. Temperature range: Ambient +4°C to 50°C Temperature control increments: 0.1°C Temperature stability (at 37°C): ± 0.1°C Required gas pressure: 0.05 MPa (0.5 bar/7.2 psi) Humidity control (at 37°C): 95% Reservoir capacity: 2.5 Liters Volume: 170 L Dimensions: (WxHxD): 686 x 846 x 701 mm Interior dimensions: (WxHxD): 538 x 691 x 445 mm Weight: 83 kg

Edwards nEXT930D - CF200 NW25 Turbomolecular Pump Ultimate Vacuum &lt;6x10-10 mbar Inlet Connection  (more)DN 200 CF Pumping Speed Nominal 52,200.00 l/min Features - Delivers fast nitrogen pumping speeds, making it suitable for demanding applications - Designed for R&amp;D, coating, heat treatment, furnace applications, and more - Offers variants for specific needs, including standard, high light gas compression, and regenerative stages - Compatible with TAG and TIC controllers for easy system integration - Allows for field replacement of oil cartridges and bearings with minimal tools - Provides powerful performance in a space-efficient design - Operates efficiently in any orientation, offering versatility in installation - Magnetic bearings reduce vibration, ensuring a stable vacuum environment - Optimized for high-speed and high-compression applications nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.nEXT930With the nEXT930 turbomolecular pumps Edwards provides a larger pump offering nitrogen pumping speeds of 925 l/s.Features and Benefits - Upper magnetic bearing - ensures clean vacuum, low power and low vibration. - Optimised rotor designs - deliver high speeds and high compression. - Range of variants suitable for many applications - D = standard nEXT pump variant, H = optimised rotor design for high light gas compression and T = additional regenerative stage for increased compression and higher backing pressure capability - Integrated controller / electronics - offers direct I/O or serial control or can be connected to one of our TAG or TIC controllers for easy systemisation. - Fully user serviceable - oil cartridge and bearings can be changed in the field with minimal tooling. - Inlet screen - supplied as standard INCLUDED: The Edwards nEXT930D - CF200 NW25 Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Slanted electrical front window Plugged holes in side windows Double socket UV light with magnetic f (more)astening Air flow: 0.45 m/s Recirculation air volume: 965 m3/h Exhaust air volume: 383 m3/h Total air volume: 1348 m3/h Dimensions (WxDxH): 1280 x 840 x 1380 mm Internal dimensions (WxDxH): 1190 x 600 x 665 mm Support frame height: 800 mm Weight: 281 kg