Ventana Discovery 750-200 Slide Staining System Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

System consists of: Dionex UltiMate 3000 Degasser Dionex UltiMate 3000 Pump Dionex UltiMate 3000 Aut (more)osampler Dionex UltiMate 3000 Column Compartment Dionex UltiMate 3000 Diode Array Detector PC

VACUUBRAND BVC Basic Fluid Aspiration System Control Range 100 to 500 mbar Collection Bottle 4L Pol (more)ypropylene Max. Back Pressure (abs.) 1.1 bar Features - Mechanical vacuum regulator and integrated check valve to provide optimum working vacuum and minimize the vapor load on the vacuum network. - Stable base and electricity-free operation for convenience. - Autoclavable collection bottle designed to reduce aero­sol and foam formation; autoclavable quick-couplings available as accessory. - Aspiration hand set VacuuHandControl (VHCpro) with flow-through suction tube - no contamination of handle by aspirated media. - Hydrophobic 0.2 µm sterilizable filter - contamination risks for the vacuum pumping system are greatly reduced; autoclavable as complete unit together with the collection bottle. The BioChem-VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network (e.g., VACUU·LAN®) and does not require electric power. The chemical-resistant mechanical vacuum controller always ensures an optimal operating vacuum. The controller opens only when needed thus limiting the gas load on the vacuum source. The evaporation of collected liquid is minimized. The inlet tubing integrated in the bottle head reduces aerosol and foam formation and ensures a long service life of the hydrophobic protection filter. The aspiration system is available either as BVC basic with 4l PP bottle or as BVC basic G with 2l coated borosilicate glass bottle. INCLUDED: The VACUUBRAND BVC Basic Fluid Aspiration System includes: - Complete Fluid Aspiration System for current Vacuum Source - Hose Nozzle DN 6/10mm - VacuuHandControl VHC Aspiration Hand Set - 4L Collection Bottle - Protection Filter - Operator's Manual - 1 Year Manufacturer's Warranty

Polyscience P60NNA101B IP-60 Immersion Probe Cooler, 1.5” Ø Rigid Coil Probe with 180° bend, -60° to (more) -20°C, 120V, 60Hz3D Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P60NNA101B IP-60 Immersion Probe Cooler, 1.5” Ø Rigid Coil Probe with 180° bend, -60° to -20°C, 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heating thermostat from 20 to 200°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of Gold immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

If you buy a High Resolution Scale PUE 7.1 by July 31, 2024, you will receive each of these products (more) along with a FREE lifetime license for the Workflow Module. High Resolution Scale The HRP high resolution scales feature a cutting-edge measuring system based on RADWAG MonoBLOCK® technology. It allows working with a readability of 1 g at a maximum capacity of 300 kg and 20 g at a maximum capacity of 2000 kg, with a repeatability of 3 g guaranteed. 9 advantages, 1 monobloc The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved technology. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. The HRP high resolution scales feature a cutting-edge measuring system based on RADWAG MonoBLOCK® technology. It allows working with a readability of 1 g at a maximum capacity of 300 kg and 20 g at a maximum capacity of 2 000 kg, with a repeatability of 3 g guaranteed. For such industries as pharmaceutical, chemical, food and… HRP scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, analog output module, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, PUE 7.1 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of PUE 7.1’s working mods.

Adam Equipment LPB 623E Luna Precision Balance, 620g, 0.001g Capacity 620g Readability 0.001g Repea (more)tability 0.002g Features - Vivid, backlit LCD easily visible in any lighting conditions - Colour-coded keys facilitate quick recognition of the most frequently used buttons - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - Sealed keypad protects against dirt and spills - USB and RS-232 interfaces provide speedy communication with computers and printers - External calibration allows for verification and adjustment with weights ("I" models also feature internal automatic calibration) - Multilingual display permits use in various regions - Parts counting with preset sample sizes - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Selectable digital filtering for animal/dynamic weighing enables consistent results for moving subjects - Auto power-off to save energy The Adam Equipment Luna Precision Balances can meet the diverse weighing needs in a variety of labs, with numerous features and functions included. The Luna series offers improved performance for faster, more accurate readings. The Luna series also combines durability and performance in a stylish design, with an LCD that delivers results in large 24mm digits in white on a black background. Suitable for international use, Luna provides a useful multilingual text and display capability. RS-232 and USB facilitate data gathering and enable smooth communication with printers and computers. Designed to tolerate demanding lab tasks, Luna is constructed with easy-to-clean ABS plastic construction and a durable grade 304 stainless steel pan. The Luna Precision Balances are available in 20 different models that offer internal or external calibration, capacities from 220g to 15000g, and readabilities from 0.001g to 0.01g. INCLUDED: The Adam Equipment LPB 623E Luna Precision Balance, 620g, 0.001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty