Thermo Scientific LTQ Orbitrap XL Hybrid Ion Mass Spec & Neslab ThermoFlex 900

Varian DS-602: Equipped with a Bruker GE8221 sound dampening cabinet

Bruker Microtof Bench Top ESI-TOF MS Lab This item was removed from a university where it was surplu (more)s to requirement. It is in reasonably good cosmetic condition, with some damage sustained to the casing as displayed. It powers on, but we are unable to conduct further at our facility. The power supply cable is included.

This Thermo Finnigan LCQ Deca XP Plus Mass Spectrometer was removed from a university lab where it w (more)as surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The main board and mains switch have now been removed and sold. Not all the cables/connectors etc were re-connected during re-assembly. The following other parts were also removed; - Power supply, Serial No: 9001305 008, Model No: SDS400-3628-1, SSI P/N: 20-0049-015N - Multifan 4394, GB-PAT: 2133082 2075288, ASSY by PAPST in Hungary   - Dynode FINNIGAN P/N: 97000-98042 REV-C  - Aux valve TYPE: DEMB3628028, S/N: 237085000104  - 5kV power supply 97000 10070C  - Ion Gauge   - LED front panel + 4 screws ASSY No: 97000-61400 REV-C  - Vent Delay PCB panel ASSY No: 97000-61370 REV-A It also comes with;1 x LCQ Hardware Manual.2 x Vacuum hoses with breeze hose clamps.Various other front assembly parts. This is sold for spares/repairs

Perkin Elmer Clarus 500 Mass Spectrometer This item was removed from a university where it was surpl (more)us to requirement. It is in good cosmetic condition and powers on. When powered on to test, the item began to emit an unpleasant odour. It is listed as Spares/Repairs.

Waters Quattro Micro GC Mass Spectrometer Module Lab This system was removed from a university lab w (more)here it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The system comprises the following: - 1x Waters Quattro Micro GC S/N: RAB339- 1x Haug Mettler Toledo En Sl Power Pack Discharge Section Transformer I.D.: 01.7906.005- 1x 1x Quattro Micro GC Performance Maintenance Kit S/N: 201000170- 2x Collision Cell (Spare) P/N:M945606DC1- S/N: 176/072 - 3x VAT Mini Gate Valve Assembly, fabrication number 01232-BA06 S/N: A-986159S/N: A-962440S/N: A-70014- 1x Mini Gate Valve Assembly S/N: 2002- 1x Hexapole assembly Type 96151 10KV - 1x Waters CI Probe M946692 BC1 - 1x Waters CI-GC Probe M946690 BC1 - 5x Waters EI Probe M946696 - 5x Stainless steel filter connectors - 5x 4 mm Cup Splitter Liners - 1x Micromass MA4184 Waters 2 Way Control Box - 1x Collision Cell P/N: M945606DC1- 2x G1530-80905 - 4x 10a anti surge fuses - 4x 10a Quick blow fuses - 1x Bag of assorted quick blow fuses - 1x Bag of assorted slow blow fuses - 2x 8a anti surge fuses - 8x 15a anti surge fuses - 10x UY405565/60 - 10x Packs of Injection Septa 6366401 - 10x Packs of ITM 3 UY405565/60 - 37x Boxes of assorted ceramic spacers, insulators, rods, ion exit plates and blanking plugs - 14x Filament Rhenium M960080BC2 - 13x Filament pl02 S100638BC0-S - 3x Probe tip assembly M960084BC1 - 2x User manual - 4x Bottles of activated Alumina 450 grms - 1x Tin of activated Alumina 450 grms - 2x Bottles of aluminium oxide powder - 1x Waters Quattro Micro GC Standards Kit - 1x Detector Probe power supply. - 1x Connecting pipes with valves - 1x MAGY filter drain - 2x Bags of assorted Viton and degassed O-rings - 1x Bag of assorted ceramic spacers and bushes - 1x Bag of assorted nuts/bolts/washers/jubilee clips/fixtures/fittings - 1x Box of assorted connecting leads - 1x Utility drawer

Bruker 450/320 GCMS. System includes: Bruker 450-GC gas chromatograph, Bruker 320-MS TQ mass spectro (more)meter, Bruker CP-8400 autosampler, Pfeiffer DUO 3 vacuum pump, PC and MS Workstation 7 software and user manuals. These Bruker GC/MS solutions are designed to deliver unmatched sensitivity, flexibility, and maximum utility all at a premium value to handle even the most challenging applications including: • Food and Product Safety Assessment • Forensics • Environmental Analysis • Clinical/Toxicology Testing • Pharmaceutical Analysis • Chemical Analysis • Polymer Analysis • Petroleum Analysis Headlined by the 300-MS and 320-MS Series, these systems are the first GC Quadrupole Mass Spectrometers to feature a curved collision-cell geometry and are available in single or triple quadrupole configurations. This pioneering approach to collision-cell design enhances instrument sensitivity and specificity and provides unrivaled detection performance for multi-component target compound quantitation. The Bruker 450-GC offers single, dual or triple channel configuration flexibility and automation for maximum productivity. Operating temperatures: 10 °C to 40 °C. The Bruker 320-MS provides femtogram sensitivity, a 2000 m/z mass range The 300-MS is designed to enhance productivity. It is capable of screening or quantifying more than 150 compounds in a single sample run. The 320-MS offers: Electron Ionization (EI) mode with 10 to 800 Da mass range, superior negative ion performance, triple-quadrupole configuration and flexible method development. The 300-MS is ideal for the routine, value-conscious laboratory where throughput and ruggedness are essential.

A&D Weighing Galaxy HR-100AZ Analytical Balance, 102 g, 0.1 mg Capacity 102 g Readability 0.1 m (more)g Repeatability 0.1 mg Features - Compact Super Hybrid Sensor (C-SHS) enables space saving with fast 2 sec stabilization - One-touch Cal allows any user to perform internal calibration in seconds - HR-AZ Series products come equipped with internal calibration, ensuring precision and ease of use to meet diverse application and budgetary needs. - Rugged, shatterproof breeze break with anti-static plastic provide safety for challenging applications where product & user safety is a concern - Rotary-Radius doors take up no extra room in fume hoods/glove box and increase safety by avoiding operation mishaps - The breeze break detaches in an instant, even with heavy gloves, making it easy to clean and safe to top-load - Simple user navigation makes this ideal entry level balance from lab to industrial weighing environments - Front mounted illuminated spirit bubble makes for an easy leveling experience to ensure the best performance - Removable breeze break allows effortless cleaning of SS pan, spill ring, base floor - Breeze break top pivots left or right to allow easy access for tall flasks and beakers The A&D Weighing Galaxy HR-100AZ Analytical Balance, 102 g, 0.1 mg, combines compact design with exceptional precision, suitable for a variety of lab and industrial environments. This model features the innovative Compact Super Hybrid Sensor (C-SHS), which not only saves space but also ensures rapid results with a 2-second stabilization time. Internal calibration is streamlined through a one-touch feature, making it easy for any user to execute, enhancing operational efficiency and ensuring reliable readings. Safety and convenience are at the forefront of the HR-100AZ's design. It includes a rugged, shatterproof breeze break with an anti-static coating to prevent contamination in sensitive work environments, such as pharmaceutical and food industries. The balance's doors are designed to rotate within their radius, requiring no additional space, which makes it ideal for use in tight spaces like glove boxes and fume hoods. Additionally, its breeze break can be quickly detached, even with gloves on, simplifying the cleaning process and ensuring the balance is safe for top-loading operations. The HR-100AZ supports a wide range of measurement units and offers features like statistical calculation, percentage analysis, and piece counting, catering to diverse analytical needs. A front-mounted illuminated spirit level ensures proper setup for optimal accuracy, and the large, backlit display enhances visibility under any lab conditions. All models in this series come equipped with features designed to enhance usability and accuracy, including rotary doors that save space and facilitate easy access. This analytical balance is designed for long-term reliability and simplicity, backed by a 5-year warranty, ensuring trustworthy performance for years to come. INCLUDED: The A&D Weighing Galaxy HR-100AZ Analytical Balance, 102 g, 0.1 mg includes: - Large Breeze Break w/ Antistatic Coating - Weighing Pan - Pan Support - Breeze Break Ring - Dust Plate - AC Adapter Plug - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Memmert IN750plus Natural Convection Incubator 749L, 115V Setting Temperature Range +20 to +80 °C C (more)onvection Type Natural Convection Chamber Volume 749 L (26.4 cu.ft.) Features - Set temperature range from +20 to +80°C, with a working range of at least 5°C above ambient - Precise temperature control with a resolution of 0.1°C, adjustable in Celsius or Fahrenheit - Advanced Control Technology with the ability to adjust parameters including air flap position, program time, and time zones - Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber, ensuring a contaminant-free environment - AutoSAFETY system with integrated over- and undertemperature protection (ASF) and an audible/visual alarm for reliable safety - Durable interior made of stainless steel with deep-drawn ribbing and protected heating elements on all four sides - High-capacity chamber load of up to 661 kg with adjustable stainless steel shelving for flexibility in storage - Exterior constructed from textured stainless steel, providing superior resistance to corrosion and wear The Memmert IN750plus Natural Convection Incubator 749L, 115V offers an exceptional combination of precise temperature control and safety features for high-capacity applications. With a spacious 749-liter chamber, this incubator provides a temperature range from +20°C to +80°C, ensuring that your samples remain consistently within the desired conditions. The dual high-definition TFT-color displays of the ControlCOCKPIT adaptive digital PID-microprocessor controller allow for easy monitoring and adjustments. For enhanced precision, the system utilizes two Pt100 Class A sensors in a 4-wire circuit to mutually monitor temperature, ensuring optimal conditions even in demanding situations. The incubator also includes a fixed sterilization program for the working chamber, with 4-hour cycles at 160°C to maintain a sterile environment. Safety and durability are key features of the Memmert IN750plus. The AutoSAFETY system provides over- and undertemperature protection by automatically adjusting according to setpoint values, with alarms to alert users in case of deviations. The exterior is constructed from durable, textured stainless steel that resists corrosion and wear, while the interior features deep-drawn ribbing and large-area heating on all four sides for consistent heat distribution. The interior's stainless-steel design enhances the incubator’s longevity and hygiene, making it ideal for temperature-sensitive applications in laboratories and industrial settings. Additionally, adjustable shelving allows for flexible sample arrangements and can support a maximum chamber load of up to 661 kg, ensuring versatility for diverse lab requirements. INCLUDED: TheMemmert IN750plus Natural Convection Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

PS.R2 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. Communication interfaces New PS.R2 balances, like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm balances with a smaller pan have a draft shield. The balance precision and the measurement accuracy is assured by automatic internal adjustment, which takes into consideration temperature changes and time flow. PS.R2 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard. Database - a direct access to databasis Function - a direct access to the basic functions F1 do F4 - programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

We provide you with three models of platforms in plastic casing: with readability [d] of 0.5 g, 1 g  (more)and 2 g and a maximum capacity [Max] of 0.6/ 1.5 kg, 1.5/3 kg and 3/6 kg. Each model has a weighing pan dimensions of 195 x 195 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE CY10, PUE C32, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. Power of steel The use of stainless steel for the weighing pan guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashing. The housing is made of ABS plastic.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Scientific Industries SI-M236 Multi Vortex Genie Shaker The Scientific Industries SI-M236 Multi Vort (more)ex Genie Shaker offers variable speeds from 200 to 1,000rpm for gentle shaking to vortexing of multiple vessels at one time, and can be operated in continuous mode or for timed operation from 1 to 99 minutes. This mixer has an adjustable clamping system that accommodates a variety of containers, including deep well plates and up to four 500mL bottles. It also comes with two removable 12-slot tube racks that fit into the clamping system to hold as many as 24 tubes, vials, or cylinders up to 29mm in diameter. The Multi Vortex Genie is new in the box . Includes: 2 Removable 12-Slot Tube Racks Power Cord Original Manufacturer Documentation Full 6 month Parts and Labor WarrantyScientific Industries SI-M236 Multi Vortex Genie Shaker Specifications Speed (RPM) 200 - 1000RPM (up to 950RPM for 50Hz models) Timer 1-99 minutes or continuous Orbit 4mm diameter Product Weight 11.3 kgs (25lbs) Dimensions (base) 310 x 270 x 195mm (12.2 x 10.6 x 7.7in) Markings CE