Yamato LT-500B Overhead Stirrer, 100-120V

IKA RW 20 Digital Mechanical Overhead Stirrer Speed Range 60 to 2,000 RPM Viscosity Max. 10,000 mPas (more) Stirring Quantity Max. 20 l Features - With digital display - Robust, slimline, ergonomic design - Technical improvements on the trusted RW 20 series designs - With constant power-drive - Two speed ranges for universal use from 60 - 2.000 rpm - Push-through agitator shafts (only when stationary) - For stirring quantities of up to 20 l (H2O) The RW 20 Digital Stirrer is designed with a robust, slimline, ergonomic design and features a digital display. It incorporates technical improvements on the trusted RW 20 series designs and offers a constant power-drive. The stirrer has two speed ranges for universal use, from 60 - 2000 rpm, and push-through agitator shafts (only when stationary). It is capable of stirring quantities up to 20 liters (H2O) with a maximum motor rating input of 85 W and output of 35 W. The device includes an LED speed display and stepless speed control, with a maximum viscosity of 10000 mPas and a nominal torque of 1.5 Nm. The stirring element is fastened by a chuck, and the device features a mechanical speed control with an accuracy of ±1 rpm. The RW 20 Digital Stirrer has dimensions of 88 x 294 x 212 mm and weighs 3.1 kg.

Heidolph 036300510 Overhead Stirrer Visco Jet Impeller inoJET, 120mm (POM) Particularly in the case  (more)of applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers. The shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. The VISCO JET® 120 is ideal for vessels with the following characteristics: ideal vessel diameter: 200-300 mm, ideal ground clearance: 36 mm, ideal filling level: 200-300 mm, and ideal volume: 6,300 -21,200 ml. This VISCO JET® 120 is made of POM plastic and can be used up to max. 90°C. A polyamide coated stirrer shaft with a diameter of approximately 10 mm is included in the scope of delivery. INCLUDED: The Heidolph 036300505 Overhead Stirrer Visco Jet Crack Impeller, 80mm (Stainless Steel) includes: - 10mm Stirrer Shaft - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph 036300490 Overhead Stirrer Visco Jet Impeller inoJET, 80mm (POM) Particularly in the case o (more)f applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers. The shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. You can find out more about this here. The VISCO JET® 80 is ideal for vessels with the following characteristics: ideal vessel diameter: 133-200 mm, ideal ground clearance: 24 mm, ideal filling level: 133-200 mm, and ideal volume: 1,90 -6,300 ml. This VISCO JET® 80 is made of POM plastic and can be used up to max. 90°C. A polyamide coated stirrer shaft with a diameter of approximately 10 mm is included in the scope of delivery. INCLUDED: The Heidolph 036300490 Overhead Stirrer Visco Jet Impeller inoJET, 80mm (POM) includes: - 10mm Stirrer Shaft - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph 036300350 Overhead Stirrer Impeller, BR 12 Pivoting-Blade Especially when using narrow-neck (more)ed vessels, e.g. round-bottom flasks, a stirring tool with pivoting blades is used. Just like our pivoting-blade impeller BR 12. This blade impeller is ideal for dissolving and homogenizing in vessels with the following characteristics: ideal vessel diameter: 120 mm, ideal ground clearance: 6 mm, ideal filling level: 120 mm, and ideal volume: 1,400 ml. The pivoting-blade impeller BR 12 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300350 Overhead Stirrer Impeller, BR 12 Pivoting-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Benchmark OS20L Overhead Stirrer, 20L includes stand, and 4 arm propeller, 115V Mixing Capacity (H2O (more)) 20L Maximum Torque 40Ncm Maximum Viscosity 10,000 mPas Features - High torque and advanced digital microprocessor control for smooth mixing of low and medium viscosity samples - Protected from damage by sensors that shut down operation in the case of high viscosity or obstruction - LCD control panel - Includes complete stand assembly - Compact and quiet - Digital accuracy and convenience - Supplied with a 4 arm stainless steel propeller - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

S+B 3 Drawer cabinet low Ice blue 600

Grant JB Aqua 18 Plus Water Bath Lab This item was removed from a university where it was surplus to (more) requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition, however the handle has snapped off, this does not affect its functionality.

This Applied Biosystems Veriti 96 Well Thermal Cycler was removed from a university lab where it was (more) surplus to requirements. This item powers on and is in good cosmetic condition with very minor surface damage. It has been tested with a digital thermometer (not included). It is in good working order. Block type: 96 well

Newtek Tricaster TCXD455 Cs Multistandard Switcher And Control Surface This system was removed from  (more)a university lab where it was surplus to requirements. All units are in good cosmetic condition. The Newtek Tricaster TCXD455 Cs Multistandard Switcher and Keyboard power on and communicate successfully, there is no operating system installed as there is no HDD. For this reason, the control surface could not be tested.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.