Ohaus Guardian 7000 e-G71HS07C Hotplate Stirrer, 120V

Guardian 2000 Ohaus - Economical, for general stirring and heating Ideal for education and laborator (more)ies requiring fast, economical daily heating and reliable stirring up to 15 litres. All three models offer a simple knob control to easily adjust the heating and/or stirring functions. The heavy-duty construction includes an optional support rod holder. Stir models include PTFE coated stir bars. ★ Safe heating up to 500°C and stirring up to 15L with an easy to use knob control ★ Rugged metal housing with spill resistant design. The smooth, chemical-resistant ceramic soleplate is easy to clean ★ Safety is of the utmost importance: the indicator light turns on when the plate exceeds 40°C, ensuring operator safety during all heating applications. Applications Boiling liquids, preparation of samples and stock solutions, buffers and dissolution reagents, preparation of media, concentration of samples Display Light indicator for hot plate, green light when unit is heating and/or stirring Functionality Simple knob control, agitation up to 1600 rpm, temperature up to 500°C (or 380°C for round plate model) power cord (included), agitation models include PTFE coated stir bar Construction Heavy duty metal housing, PET front panel, control knobs, ON/OFF switch to disconnect heater, integrated support rod holder, easy to clean ceramic coated resin, ceramic or stainless steel tops Clean and simple control panel. For education, it is designed for maximum safety in the classroom. Easy Swtich on/off for all models. Fast and secure. THE MODELS AVAILABLE: The Guardian 2000 is made up of 9 models. Models with hotplate only, with magnetic stirring only or with both. In turn, they can be chosen for the size of the plate: 102x102mm; 174x174mm; Ø135mm.

IKA Mini MR standard Small magnetic stirrer Speed ​​range: 0 – 1500 rpm Capacity: 1 l Plate dimensi (more)ons: 115 x 115 mm Dimensions (wxhxd): 115 x 45 x 129 mm Weight: 0.22 kg

IKA RW 20 Digital Mechanical Overhead Stirrer Speed Range 60 to 2,000 RPM Viscosity Max. 10,000 mPas (more) Stirring Quantity Max. 20 l Features - With digital display - Robust, slimline, ergonomic design - Technical improvements on the trusted RW 20 series designs - With constant power-drive - Two speed ranges for universal use from 60 - 2.000 rpm - Push-through agitator shafts (only when stationary) - For stirring quantities of up to 20 l (H2O) The RW 20 Digital Stirrer is designed with a robust, slimline, ergonomic design and features a digital display. It incorporates technical improvements on the trusted RW 20 series designs and offers a constant power-drive. The stirrer has two speed ranges for universal use, from 60 - 2000 rpm, and push-through agitator shafts (only when stationary). It is capable of stirring quantities up to 20 liters (H2O) with a maximum motor rating input of 85 W and output of 35 W. The device includes an LED speed display and stepless speed control, with a maximum viscosity of 10000 mPas and a nominal torque of 1.5 Nm. The stirring element is fastened by a chuck, and the device features a mechanical speed control with an accuracy of ±1 rpm. The RW 20 Digital Stirrer has dimensions of 88 x 294 x 212 mm and weighs 3.1 kg.

IKA Ministar 80 Digital Overhead Stirrer Stirring Quantity Max 50 Liters Speed Range 0/50 - 500 rp (more)m Viscosity Max. 60000 mPas Features - The IKA Ministar 80 Digital Overhead Stirrer boasts a compact design, ensuring space efficiency without compromising performance. - With constant torque across its rpm range, the IKA MICROSTAR and MINISTAR series offer reliable stirring for various lab needs. - Operating the stirrers is a breeze, thanks to a stable rotary knob and a clear display showing the rotational speed. - Rapid and simple software updates are facilitated through the USB interface, ensuring the devices stay up-to-date effortlessly. - The IKA MICROSTAR and MINISTAR stirrers prioritize essential features, making them dependable companions in the lab. - Available in six versions with rpm up to 2,000 and torque up to 80 Ncm, these stirrers excel in both performance and compactness. The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee. See for yourself:Compact design - The reduced design and the focus on the most essential aspects make the new IKA MICROSTAR and MINISTAR stirrers reliable laboratory companions. Constant torque - All models of the IKA MICROSTAR and MINISTAR series guarantee a constant torque over the entire rpm range. The new devices are available in six different versions with rpms of up to 2,000 rpm and a torque of up to 80 Ncm. Ease of operation - Operation takes place using a stable rotary knob. The display clearly shows the rotational speed. Rapid updates - Regular software updates can be undertaken rapidly and simply via the USB interface. Click Here to View Product Video INCLUDED: The IKA Ministar 80 Digital Overhead Stirrer includes: - MINISTAR 80 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Ministar 80 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)50 lMotor rating input60 WMotor rating output46 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 500 rpmViscosity max.60000 mPasOutput max. at stirring shaft42 WPermissible ON time100 %Torque max. at stirring shaft80 NcmSpeed controlTurning knob Setting accuracy speed1 ±rpm Deviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.8 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)70 x 193 x 147 mmWeight1.72 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input69 WPower input standby0.5 WDC Voltage24 VCurrent consumption2900 mAComparison of ModelsSpecificationsMinistar 20 ControlMinistar 20 DigitalMinistar 40 ControlMinistar 40 DigitalMinistar 80 ControlMinistar 80 DigitalStirring Quantity Max. (H2O)15 l15 l25 l25 l50 l50 lMotor Rating Input60 W60 W60 W60 W60 W60 WSpeed DisplayLCDLEDLCDLEDLCDLEDSpeed Range0/50 - 2000 rpm0/50 - 2000 rpm0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpmViscosity Max.10000 mPas10000 mPas30000 mPas30000 mPas60000 mPas60000 mPasTimer DisplayLCDNoneLCDNoneLCDNoneTemperature DisplayYesNoYesNoYesNoDimensions (W x H x D)70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mmUSB InterfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(7) { background-color: #fffacd; } Request a Formal Quote

Technopolymer casing resists chemicals White surface for visualization of particles and color change (more)s Speed regulation up to 1100 rpm Accepts up to 5 liter flasks Remains cold, even after days of continuous use Ideal for microtitration, BOD, microbiology and biochemistry

Stirring speed: up to 2200 rpm Suitable for volumes up to 5 liters (H2O) Plate diameter: 104 mm Idea (more)lly suited for titrations Dimensions (WxHxD): 126 x 80 x 140 mm Weight: 1.2 kg

Memmert IN75plus Natural Convection Incubator 74L, 115V Setting Temperature Range +20 to +80°C Conv (more)ection Type Natural Convection Chamber Volume 74 L (2.6 cu.ft.) Features - Setting temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Internal volume of 74 L (2.6 cu.ft.) with a maximum chamber load of 264 lbs (120 kg) - ControlCOCKPIT with TwinDISPLAY, featuring an adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Natural convection system and admixture of pre-heated fresh air by electronically adjustable air flap - Includes AtmoCONTROL software for data logging via Ethernet interface, USB stick available as an accessory - Temperature control features adjustable overtemperature monitor and mechanical temperature limiter according to DIN 12880 - Comes with two stainless steel grids, fully insulated stainless steel door, and an inner glass door - Stainless steel interior, reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IN75plus Natural Convection Incubator 74L, 115V offers advanced temperature control and versatility for various laboratory applications. With a setting temperature range from +20 to +80°C and a working temperature range starting 5°C above ambient, it ensures precise incubation conditions. The TwinDISPLAY ControlCOCKPIT allows for easy adjustment of essential parameters like temperature, air flap position, and timer, while two Pt100 sensors ensure accurate temperature monitoring and mutual functionality in case of sensor failure. The natural convection system guarantees uniform temperature distribution, ideal for sensitive samples, and the adjustable pre-heated fresh air admixture helps maintain optimal air quality within the chamber. This incubator also features a durable stainless steel interior with a capacity of 74 liters, reinforced by deep drawn ribbing and integrated large-area heating for even thermal regulation. The fully insulated stainless steel door with an inner glass door provides safety and visibility. With AtmoCONTROL software, users can conveniently manage data logging and programming through USB or Ethernet. The IN75plus is built for high-performance with a maximum chamber load of 264 lbs and can accommodate up to six shelves, making it a robust, reliable choice for professional laboratory environments. INCLUDED: TheMemmert IN75plus Natural Convection Incubator 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

OMNITIP™ Starter ST 10 µl tips are high quality laboratory accessories designed for prec (more)ision pipetting. Designed with efficiency and convenience in mind, they are an indispensable tool for everyday laboratory work. Capacity: 10 µl Colour: transparent Set contains: box, 6 racks and 576 tips Application: - precise dispensing of biological samples, - accurate pipetting of medicines and medical solutions, - preparing and transferring chemical solutions, - an indispensable tool in experiments requiring precise dosing.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Maximum Robustness The HRP high resolution scales are very robust. Their platforms are recognised to have an IP 67 level of protection. They feature additional sealing elements to protect against dust, dirt, and moisture and can thus be cleaned with a pressure washer. 9 advantages The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved RADWAG MonoBLOCK technology. The new – taller and larger – RADWAG MonoBLOCK has enabled the best repeatability and speed in the class of high-resolution industrial weighing platforms. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. For such industries as pharmaceutical, chemical, food and… HY10.HRP H scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. The HY10.HRP and HX7.HRP scales whose terminals are made of stainless steel can be used even in the most demanding wet environments. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, moduł wyjść analogowych, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, HY10 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of HY10’s working mods.

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

Small footprint, inexpensive, portable mini power supplies for use with small or mini horizontal and (more) vertical electrophoresis apparatus. Output voltage: ≤400 V Output power: ≤50 W Output current: 250 mA at 200V, 125 mA at 400V 3 parallel outputs (4 mm sockets) 1 V or 1 mA resolution Voltage or current shown on large LED display Overload protection, including protection against accidental short circuit at output terminals