IKA RT 15 Multiposition Magnetic Hotplate Stirrer

Yamato LT-400AA Complete Overhead Stirrer with Stand & 60mm 4-Blade Propeller, 115V Speed Range  (more) 10~300rpm Max Torque 0.9N•m (9.0kgf•cm) Motor DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with higher torque for high viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. Set includes stand, rod, stainless steel shaft and 60mm 4-blade propeller. Speed range 10~300 rpm. INCLUDED: The Yamato LT-400AA Complete Overhead Stirrer with Stand & 60mm 4-Blade Propeller, 115V includes: - Stand and Rod - Clamp, Safety Cover, Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA R 1330 Anchor Stirrer Tangential flow, high shearing rate at edges, minimum deposits on the ves (more)sel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids.Stirrer Ø: 45 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1330 Anchor Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

Benchmark IPS7000-10 MHS-10 10-Position Hotplate Stirrer The Benchmark Multi-Position Hotplate Stirr (more)ers provide simultaneous heating and stirring of multiple samples. The large top-plates feature a durable, chemically resistant, white-ceramic coating that provides exceptionally uniform temperature control up to 120°C. Both mixing speed and temperature are conveniently controlled on the digital display, which also features a safety LED that warns the user when the top plate is hot and unsafe to touch. Two models are available, offering either 5 or 10 stirring positions. Each stirring position is driven by an independent motor, providing efficient mixing of sample sizes up to 1000ml. With increased spacing (100mm) between stirring positions, the top surface is designed to accept a wide range of vessel types, including beakers, Erlenmeyer flasks and media storage bottles. INCLUDED: The Benchmark IPS7000-10 MHS-10 10-Position Hotplate Stirrer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Maximum stirring amount (H2O): 20 l Speed range: 0 – 1100 rpm Max stir bar length: 80 mm Plate mater (more)ial: stainless steel Plate dimensions: ∅125 mm

Maximum temperature: 300°C Speed: 0 – 1400 rpm Heating plate surface: 135 x 135 mm

Maximum temperature: 350°C Maximum speed: 1250 rpm Plate diameter: 145 mm Dimensions (HxWxD):120 x 1 (more)60 x 210 mm

Labconco FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector Features - Patented mois (more)ture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable.Features Upright stainless steel collector coil holds 6 liters of ice before defrosting Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time Front viewing window makes monitoring vacuum pump oil hassle free FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. INCLUDED: The Labconco 700612000 FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA VACSTAR control Final pressure without gas ballast 2 mbar Pump rate max. (50/60Hz) 22 l/min Inpu (more)t pressure 2 - 1030 mbar Features - Powerful 4-chamber membrane vacuum pump, chemical-resistant and low-maintenance - Integrated vacuum controller with a detachable WiCo controller for versatile operation - Selection of operating modes from automatic to manual, including pumping, evacuation, and cleaning functions - High suction performance at 22 l/min with a minimum pressure of 2 mbar - Achieves a final pressure of 2 mbar without gas ballast, featuring 4 suction levels - Boiling point detection and a comprehensive solvent library for specific applications - Features a venting valve, condensate trap, and emission condenser for enhanced safety - Timer function for scheduled operations with a noise level of 54 dB(A) at low pressure Separation, filtration, removal: The VACSTAR dry 4-chamber membrane vacuum pump is powerful, resistant to chemicals and low-maintenance. VACSTAR control is the ideal system with its integrated vacuum controller and removable display. The controller offers a suitable mode for the desired process: from automatic to manual operation, right through to pumping or an evacuation and cleaning function. Integrated vacuum controller with removable controller (WiCo): Depending on the application, you can easily select your operating mode either by using the intuitive operator menu or by remote control.For additional safety for users and environment, we recommend using the VSE 1 vacuum safety emission condenser, which prevents solvents from being released into the room air. The VSE 1 is available as accessory. INCLUDED: The IKA VACSTAR control includes: - WiCo VACSTAR control - Vacuum hose (1 m) - WH11 - OS 1.0 WiCo power supply unit - USB Cable - USB A to Micro-B, 2 m - USB A-B Cable - Screw driver - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hirayama HICLAVE HVA-110 Economical Floor-Standing Autoclave with Cooling Fan, 110L, 208/220/240V Ch (more)amber Volume 110L Sterilization Temperature Range 105C to 135C Chamber Dimensions 16.5" x 31.3" (42.0 cm x 79.5 cm) Features - Space-saving design with lid opening upward. - Standard built-in cooling fan for faster post- sterilization cooling. - Dual lid safety interlock prevents lid opening when a cycle is in progress, the chamber is pressurized, or the temperature exceeds 97°C. - Agar sterilization mode sterilizes agar, and then automatically keeps it warm to prevent it from solidifying. - One-touch lever to easily open and close chamber lid. - Agar melting mode for rapidly melting agar and then automatically maintaining it at liquid temperature, or for a hot and faster start-up. - Door-closure sensor prevents a cycle from starting unless the door is closed properly. - In-process display shows the status and the progress of sterilization cycle. The HVA-85 and HVA-110 models incorporate a 85-liter and a 110-liter chamber, respectively. They are self-contained, portable floor models mounted on caster wheels. Equipped with a chamber 16.5” in diameter, they can accommodate significantly larger loads than 50-liter models. They are ideal for the sterilization of fermenters, media, wastes, and laboratory glassware.INCLUDED: The Hirayama HICLAVE HVA-110 Economical Floor-Standing Autoclave with Cooling Fan, 110L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Benchmark myBlock I Dry Bath, Single PositionBenchmark’s myBlock series is a “next generation” produ (more)ct line that introduces several major advantages over traditional dry baths. They are the first digital dry baths to include advanced microprocessor controls, timed or continuous operation and a removable hinged lid. In addition, an optional external temperature feedback probe can be positioned directly inside a sample tube, providing real-time control and monitoring of actual sample temperature.The myBlock’s transparent lid helps to promote better uniformity and minimize temperature stratification in the block by maintaining a warm air jacket layer. It also helps to reduce energy consumption by minimizing heat loss to the environment. The hinged lid can be flipped open (to the rear), or easily removed (lifted off) to Both the single and dual block models can be ordered in a configuration that includes our unique Quick-Flip™ blocks. These universal blocks accept tubes from 0.5 to 2.0ml and, with just a quick flip to the other side, accomodate 0.2ml tubes, PCR strips or (in the dual block model only) a PCR plate. Other blocks are available for tubes up to 50ml. *Block Sold separately* Click Here to View Product Video INCLUDED: The Benchmark myBlock I Dry Bath, Single Position includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Principle: Airborne microorganisms are collected on microbiological agar by impaction which is achie (more)ved by aspiration. Nominal air flow rate: 100 litres of air per minute Impact speed: <20m/sec Air sample volumes: 10, 20, 30, 50, 100, 200, 500, 1000 litres are preset (standard mode), up to eight other volumes can be selected and stored in the instrument (user mode). The maximum volume of air per cycle is 1000 litre. Suitable plate diameter: 90 mm Size: 105 x 100 x 290 mm Weight: 1750 g

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW