IKA R 1330 Anchor Stirrer

MULTI-HS 15 DIGITAL VELP MAGNETIC STIRRER SAFETY AND RESISTANCE - Warning message on the display whe (more)n the plate reaches 50°C - The Safety Lock function prevents unintentional changes of settings in order to meet all laboratory safety standards. - The VELP CerAlTop ™ top plate is made of aluminum alloy which guarantees temperature homogeneity with excellent heat distribution and high specific power thanks to the circular configuration. A thin layer of ceramic protects the plate from scratches and chemicals and guarantees high resistance to thermal stress and thermal shock. SMART AND SIMPLE USER INTERFACE The LED display is easy to read and thanks to the intuitive icons the operator will always have an eye on the working conditions: - Active heat - Temperature set point - Activating the timer - Automatic reverse option - Lock button Two extremely precise rotary knobs control the temperature and speed setting and to start the heating you need to press the knob; a small detail that exemplifies Velp's utmost attention to operator safety. By touching both knobs simultaneously, it is possible to access the advanced menu for the most suitable configuration of all operating modes. POWER AND PRECISION - The extremely powerful Brushless motors are able to stir from 100 up to 1000 rpm, offering practically unlimited duration over time. The stirring speed is always constant, even when the viscosity changes, thanks to the SpeedServo ™ torque compensation. - The middle button allows you to set the timer for unsupervised work. The Timer can be set from 1 min up to 99 hours and more advanced configurations can be set in the advanced menu. - The Auto-reverse option improves the kinetics by changing the direction of the stirring direction. You can also set the direction change to your preferred time interval. TECHNICAL FEATURES: Stirring position distance: 74 mm. Stirring speed: 100 - 1000 rpm. Speed setting accuracy: 5 rpm. Temperature setting resolution: 1°C. Hot top warning: on display (>50°C). Timer: from 1 min to 99 h: 59 min. Timer setting steps: 1 min. Autoreverse: from 5 s to 99 min-59 s. Autoreverse setting steps: 1 s.

Benchmark OS40L Overhead Stirrer, 40L includes stand, and 4 arm propeller, 115V Benchmark’s Overhead (more) Stirrers feature high torque and advanced digital microprocessor control for smooth mixing of low and medium viscosity samples. Speed and run time are accurately set and monitored on the LCD screen. Both the 20L and 40L capacity models are supplied with a 4 arm stainless steel propeller, additional steel and Teflon accessories are available. A feed-through chuck holds accessory shafts firmly in place and is easily tightened and loosened without tools. The overhead stirrers are protected from damage by sensors that shut down operation in the case of high viscosity or obstruction, while a splash cover protects the connection mechanism from potential corrosion. Unlike most mixers, the Benchmark series is also supplied with a support stand and mounting hardware. The stirrer easily and securely attaches to the stand for compatibility with a variety of vessels, up to 24 inches high.INCLUDED: The Benchmark OS40L Overhead Stirrer, 40L includes stand, and 4 arm propeller, 115V includes: - Stirrer Stand - 4 Arm Propeller - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex MS-H-ProT Circular LCD Digital Magnetic Hotplate StirrerThe MS-H-Pro-T is one of the most t (more)echnically advanced hotplate-stirrers in the marketplace and features an independent back-lit LCD display for both heat, stirring and timer functions and PID technology. The MS-H-Pro-T controls temperature at +/- 1ºC. Simply set the timer from 1min to 99hr-59min and the hotplate will heat at the target temperature for the set time period and automatically turn off. If the stirring function is activated, the unit will continue to stir until switched off. The MS-H-Pro-T also has a DC brushless (spark free) motor for extremely long life and excellent performance. Click Here to View Product Video INCLUDED: The Scilogex MS-H-ProT Circular LCD Digital Magnetic Hotplate Stirrer includes: - Stirrer Bar - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Guardian 2000 Ohaus - Economical, for general stirring and heating Ideal for education and laborator (more)ies requiring fast, economical daily heating and reliable stirring up to 15 litres. All three models offer a simple knob control to easily adjust the heating and/or stirring functions. The heavy-duty construction includes an optional support rod holder. Stir models include PTFE coated stir bars. ★ Safe heating up to 500°C and stirring up to 15L with an easy to use knob control ★ Rugged metal housing with spill resistant design. The smooth, chemical-resistant ceramic soleplate is easy to clean ★ Safety is of the utmost importance: the indicator light turns on when the plate exceeds 40°C, ensuring operator safety during all heating applications. Applications Boiling liquids, preparation of samples and stock solutions, buffers and dissolution reagents, preparation of media, concentration of samples Display Light indicator for hot plate, green light when unit is heating and/or stirring Functionality Simple knob control, agitation up to 1600 rpm, temperature up to 500°C (or 380°C for round plate model) power cord (included), agitation models include PTFE coated stir bar Construction Heavy duty metal housing, PET front panel, control knobs, ON/OFF switch to disconnect heater, integrated support rod holder, easy to clean ceramic coated resin, ceramic or stainless steel tops Clean and simple control panel. For education, it is designed for maximum safety in the classroom. Easy Swtich on/off for all models. Fast and secure. THE MODELS AVAILABLE: The Guardian 2000 is made up of 9 models. Models with hotplate only, with magnetic stirring only or with both. In turn, they can be chosen for the size of the plate: 102x102mm; 174x174mm; Ø135mm.

LABOMAG Be9 magnetic stirrer - 1 liter New equipment in its original packaging Model: Be 9 (nine) Sp (more)eed ​​range: 100 - 1000 min⁻¹ Max mixing capacity H₂O: 1000 ml Stirring power: 4 W W×D×H: 130×195×22 mm

This Thermo Scientific MaxQ 6000 Incubator Shaker Model - 4360 was removed from a university la (more)b where it was surplus to requirements. The unit has a power board fault. It is in reasonably good cosmetic condition with some marks from use. The door also does not close properly. Internal dimensions - D52 x W55 x H67cm1 Shelf - 52 x 54cmShaker Plate - 45 x 45cm It is sold for spares or repairs due to the electrical fault.

IKA DB 2.1 Conical Tube Dry Block (15 ml)

VACUUBRAND MV 2 VARIO Select Diaphragm Pump Ultimate Vacuum 0.3 mbar (0.2 Torr) Maximum Pumping Spe (more)ed 1.9 CFM at 60Hz Number of Heads/Stages 4/4 Features - VACUU-SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory - Automatic boiling point detection and adjustment of the vacuum for short process times - Extraordinary diaphragm life for minimum operational and servicing costs - Contamination-free pumping and evacuation - Excellent ultimate vacuum, and even better ultimate vacuum with VARIO version in TURBO-MODE for use as backing pump for turbo pumps Four-stage diaphragm pumps - like the MV 2 VARIO select - are an excellent solution for continuous, oil-free pumping of non-corrosive gases at fractional millibar vacuum levels. Wetted parts are made of aluminum, stainless steel and carefully selected plastics suitable for a wide range of non-corrosive applications. The MV 2 VARIO select continuously adapts its motor speed to hold the desired vacuum level. That means the pump is whisper-quiet and generates ultra-low vibrations, and has high leak tightness. The highly flexible fabric-reinforced double FKM diaphragm is ideal for extended operating life. The VARIO design includes the variable speed pump and the VACUU-SELECT vacuum controller with an external gauge head. The demand-responsive motor speed control on VARIO models further extends the already long lifetimes of diaphragms and valves. Four-stage diaphragm pumps are an excellent choice for continuous, contamination-free evacuation and pumping of non-aggressive gases under the very high vacuum demands of applications in physics and analytics. They generate a clean vacuum as they are designed without any sliding seals. Hence abrasion or dust are excluded that might creep back into the application. Due to the outstanding ultimate vacuum these pumps are often used as an alternative to rotary vane pumps. A typical application is the use as backing pump for turbomolecular drag pumps. Additionally, the VARIO version provides vacuum control by precise adjustment of the diaphragm pump's motor speed. Depending on the application the demand-responsive motor speed control results in unsurpassed lifetimes of service parts like diaphragms as well as optimal performance for backing of turbo pumps. INCLUDED: The VACUUBRAND MV 2 VARIO Select Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert UF260plus Forced Circulation Oven 256L, 115V Working Temperature Range Min. 10°C above ambi (more)ent up to +300°C Oven Type Forced Air Circulation Chamber Volume 256 L (9.04 cu.ft.) Features - Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display - Volume of 256 L (9.04 cu.ft.), offering ample space for various applications - TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB - Function SetpointWAIT ensures processing only begins once the target temperature is reached - AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port - AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations - Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability The Memmert UF260plus Forced Circulation Oven 256L, 115V provides a large working chamber with a capacity of 256L (9.04 cu.ft.), making it ideal for a wide range of applications that require precise thermal processing. With a working temperature range from 10°C above ambient up to +300°C, and high-resolution displays for monitoring, this oven ensures accuracy and flexibility in temperature settings. Equipped with the advanced TwinDISPLAY system, featuring dual high-definition TFT-color displays and a multifunctional PID-microprocessor controller, users can easily control parameters such as fan speed, air flap position, and program time. The Function SetpointWAIT ensures that the process only begins once the desired temperature is reached, enhancing operational efficiency. Safety is a top priority in the UF260plus, with features like an overtemperature monitor (TWW), adjustable temperature limiter (TWB), and a mechanical temperature limiter (TB), all designed to prevent overheating. The AutoSAFETY system includes integrated over- and undertemperature monitoring "ASF," which adjusts automatically and provides alarms in case of temperature deviations. This oven's stainless steel interior, reinforced with deep-drawn ribbing and integrated heating on four sides, ensures even heat distribution and easy cleaning. Advanced AtmoCONTROL software allows for seamless programming and data management via USB or Ethernet, making the UF260plus an excellent choice for professionals requiring reliability and precision in thermal processing. INCLUDED: TheMemmert UF260plus Forced Circulation Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty