IKA RCT Basic Hotplate with Magnetic Stirrer

Magnetic stirrer AREC.X 7 Precise and accurate thermoregulation for better reproducibility AREC.X 7  (more)is equipped with state-of-the-art heating plate technology, designed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. The AREC.X 7 can be connected to the external Pt100 probe or to the VTF for precise thermoregulation of the fluid. The probe guarantees thermoregulation up to 250°C, with an accuracy of ± 1.0°C, while the VTF guarantees excellent thermoregulation performance up to 300°C and an accuracy of ± 0.5°C. The VTF is equipped with a timer, for unsupervised operation and increased productivity. Powerful stirring for your lab reactions You can rely on the AREC.X 7 for demanding laboratory reactions, as it agitates volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. Absolute safety and ease of use for laboratory operators The AREC.X 7 hotplate stirrer guarantees a superior level of safety and protection for laboratory operators, since it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic soleplate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. Save time with the new control panel Thanks to the digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood.

This listing is for a IKA RCT B S002 Heating Magnetic Stirrer.The unit is in full working condition  (more)and is ready for immediate release.The IKA RCT Basic Magnetic Stirrer is a highly versatile and reliable laboratory device, combining precision stirring with integrated heating capabilities. Designed for various lab applications, it ensures consistent performance, safety, and ease of use.Key Features:Wide Speed and Temperature Range:Powered by a strong motor, it supports a high range of stirring speeds and operates with adjustable heating plate temperatures between 50°C and 310°C.Integrated Temperature Control:Includes a PT 1000 temperature sensor for precise and real-time temperature monitoring, enabling efficient heating of the medium.Digital Display for Accuracy:Allows exact setting of temperature and speed, even when the unit is turned off, with a safety temperature limit displayed digitally.Hot Surface Warning:The Hot Top indicator alerts users when the heating plate remains hot, reducing the risk of burns.Automatic Safety Features:Switches off automatically if the connected external temperature sensor is not properly immersed, with timeout duration adjustable.Bushing for Contact Thermometer:Compatible with contact thermometers like ETS-D5, ensuring precise external temperature control for sensitive applications.Aluminum Heating Plate:Optimized for superior heat transfer and fast heating of samples.Enhanced Durability and Design:The enclosed assembly (IP 42) protects the unit against splashes and contaminants, extending its service life.Improved Magnetic Adhesion:Ensures stable stirring, even at higher speeds.Error Code Display:Provides digital error codes for straightforward troubleshooting.

Speed I: 25 – 250 rpm Speed II: 200 – 2000 rpm Dimensions (DxHxW): 280 x 280 x 100 mm

IKA R 3000.1 Moebius stirrer Maximum Speed ≤ 800 RPM Flow Type Axial Flow Material Stainless Steel F (more)eatures - Generates axial flow, drawing material from above for effective mixing - Ideal for circulating and handling low to medium viscous liquids - Made of AISI 316L / 1.4571 stainless steel for durability and resistance - Designed to work within an ambient temperature range of 5 - 40 °C - Operates at medium speeds with a maximum of ≤ 800 rpm The R 3000.1 Moebius stirrer is engineered to generate axial flow, skillfully drawing materials from above to ensure thorough mixing and circulation of low to medium viscous liquids. With a 100 mm diameter and a 565 mm shaft, it's perfectly suited for a variety of laboratory applications, operating effectively at medium speeds up to 800 rpm. Constructed from high-quality AISI 316L / 1.4571 stainless steel, it combines resilience with corrosion resistance. Weighing 0.592 kg and designed to function within a 5 - 40 °C ambient temperature range, this stirrer balances performance with durability for reliable everyday use.INCLUDED: The IKA R 3000.1 Moebius stirrer includes: - IKA R 3000.1 Moebius stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036300506 Overhead Stirrer Visco Jet Crack Impeller, 120mm (Stainless Steel) Particularly i (more)n the case of applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers. The shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. The VISCO JET® Crack 120 is ideal for vessels with the following characteristics: ideal vessel diameter: 200-300 mm, ideal ground clearance: 36 mm, ideal filling level: 200-300 mm, and ideal volume: 6,300-21,200 ml. The VISCO JET® Crack 120 is made of stainless steel. A stirrer shaft with a diameter of 10 mm is included in the scope of delivery. INCLUDED: The Heidolph 036300506 Overhead Stirrer Visco Jet Crack Impeller, 120mm (Stainless Steel) includes: - 10mm Stirrer Shaft - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Maximum stirring quantity (H2O): 15 l Speed: 50 – 2000 rpm Setting accuracy speed: ±1 rpm Deviation  (more)of speed measurement (>300rpm): ±1 % Deviation of speed measurement (<300rpm): ±3 rpm Maximum viscosity: 10000 mPas Maximum torque at stirring shaft: 20 Ncm Nominal torque: 0.2 Nm Deviation of torque measurement: ±3 Ncm Torque measurement: trend Time setting range: 0 – 6000 min Connection for external temperature sensor: PT1000 Temperature measuring range: -10°C – 350°C Temperature measurement resolution: 0.1 K Dimensions (WxHxD): 70 x 193 x 154 mm Weight: 1.56 kg Equipped with: R 1342 4-bladed propeller stirrer Standard stirring element. For drawing the material to be mixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds. Stirrer Ø: 50 mm Shaft Ø: 8 mm Shaft length: 350 mm IKA tripod scale A stand with an integrated scale and data interface. The IKA scale provides increased comfort and safety for your laboratory applications. For example, your stirrer can hang on the stable support rod. The quantities of samples to be added are weighed immediately and continuously documented during the stirring process. Sample weight of up to 6 kg The intelligent tripod scale has a weighing range of up to 6 kg with a resolution of 1 g. It is therefore particularly suitable for the direct and controlled addition of sample material while stirring. Weighing range: 5 – 6000 g Weighing accuracy: ±6 g Plate dimension: 200 x 200 mm Dimensions (WxHxD): 213 x 570 x 391 mm Weight: 5.2 kg

This Jouan Water Jacketed Incubator Model IG150 was removed from a university lab where it was surpl (more)us to requirements. This was removed from a university lab where it was surplus to requirements. The unit powers up and has been tested with both a temp and CO2 sensor (not included). It is in good working order but will require calibration upon installation. It is in good cosmetic condition with minor marks. Internal dimensions are: L41cm x W41cm x H60cm.

Wheaton Roller Incubator 1133Ltr 1057606-D with Roller Apparatus This was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer. It is in good working order. The internal sizes are 89cm (L) x 66cm (W) x 192cm (H). There are 4 power sockets fitted to the rear wall and a bag clips for the fixing of shelfs, but no shelving supplied.

This Applikon Biotechnology Z310110010 EZ-Control Bioreactor System was removed from a university la (more)b where it was surplus to requirements. Included are; Applikon Biotechnology EZ-Control Bioreactor SystemCat no. Z310110010SN - P17561/21The unit powers on and boots up.Unit dimensions - L41 W37 H72cm Parts:-Applikon Gas UnitCat no. Z351026010SN - P15698/901Powers on Applikon Type P100eCat no. Z510000010SN - P323750/24 Trolley Dimensions - L82 W53 H96cmTop Shelf - 80 x 50cmBottom Shelf - 80 x 50cm Consumables/Accessories:-Applikon 20L Appliflex Reusable pH &amp; DO Sensors Cat no. Z650002040Applikon 10L Appliflex Reusable pH &amp; DO Sensors Cat no. Z650001040Box of 1 x AppliSens Sensor ProbeBox of 6 x mixed AppliSens Sensor ProbesMechaheat JacketApplikon Slotted Blindstopper M18 X 1.5Applikon Impeller Marine "V"Wika GaugeVarious probe cables2 x Ethernet cablesApplikon Gas Outlet Bulkhead Connector Set of 8Applikon Ribbed Blindstopper G3/4"Various metal partsMetal clampApplikon Ribbed Blindstopper M30X1Wika Tube &amp; Connection GaugeArrow Pneumatics partApplikon Start up kit

Datalogic PowerScan PD9531 is a quick and reliable scanner intended for area imager barcodes. The sc (more)anner ensures omnidirectional readout of barcodes, even from the distance of 1 m. Datalogic Scanning offers two versions of scanning modules: standard - dedicated for standard-resolution barcodes, and HP - more versatile scanner of wide reading angle dedicated for high resolution barcodes. A characteristic feature of the scanner is high resolution of the image sensor that meets expectations of most applications dedicated for warehouse, logistics, transport and production solutions. Patented technology, the Green Spot and Datalogic 3GL&trade; (3 Green Lights), informs the user about correct barcode readout. This solution is ideal for rooms with high background noise such as industrial areas. The scanner is equipped with housing that features IP65 ingress protection which makes it both waterproof and dustproof device. Designed to withstand multiple drops from a height of 2 m to solid surface. User comfort is guaranteed by ergonomic shape, i.e. handy and well-balanced design. These make Datalogic PD9531 a perfect device to be applied in industry, logistics and warehouse.

Scilogex MicroPette Plus Autoclavable Pipettor, 0.5-10ul Volume Range 0.5-10uL Adjustable or Fixed V (more)olume Adjustable Volume Accuracy (±%) 1.00/1.50/2.50 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 0.5-10ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty