Easily list your scientific equipment

Top suppliers for laboratory & industry

New and used instruments

Marketplace
Analytics
Brand
IKA
Supplier
Marshall Scientific
Location
Hampton - United States
Price
$2,241.00 
(ex. VAT)
This item is
for sale
State of item
new
Categories

IKA Eurostar 60 Digital Overhead Stirrer

Marshall Scientific$2,241.00 (ex VAT)
item image

Description by the supplier

IKA Eurostar 60 Digital Overhead Stirrer



Viscosity Max

50000mPas

Speed Range

0/30 - 2000 rpm

Deviation of Speed Measurment

Less than 1%



Features

- Digital speed display

- Infinitely adjustable speed

- Push-through agitator shafts

- Overload protection

- Short-term overload operation

- Slim casing

- Quiet operation

- Error code display





Universally used strong laboratory stirrer for quantities upto 40 l (H2O). It automatically adjusts the speed through microprocessorcontrolled technology within the speed range of 0/30 - 2000 rpm. Safetycircuits installed ensures automatic cut-off in an anti-stall or overloadconditions. Continuous comparison of shaft speed to desired speed is maintainedand variations are adjusted automatically. This guarantees a constant speedeven with changes in viscosities of the sample.





INCLUDED:

The IKA Eurostar 60 Digital Overhead Stirrer includes:

- EUROSTAR 60 digital

- Chuck key

- Power Cord

- Operator's Guide

- Manufacturer's Documentation

- 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration)



IKA Eurostar 60 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)40 lMotor rating input176 WMotor rating output126 WMotor principleBrushless DCSpeed display7 segment LEDSpeed range0/30 - 2000 rpmViscosity max.50000 mPasOutput max. at stirring shaft126 WPermissible ON time100 %Torque max. at stirring shaft60 Ncm Speed controlstepless Setting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 10 mmHollow shaft, inner diameter11 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmSpeed controlelectronicNominal torque0.6 NmHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)86 x 248 x 208 mmWeight4.4 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 42Voltage230 / 115 / 100 VFrequency50/60 HzPower input176 WComparison of ModelsSpecificationsEurostar 20 DigitalEurostar 20 High Speed DigitalEurostar 40 DigitalEurostar 60 DigitalEurostar 100 DigitalEurostar 200 DigitalEurostar 400 DigitalStirring Quantity Max. per Position (H2O)15 l20 l25 l40 l100 l100 l150 lMotor Rating Input70 W176 W118 W176 W186 W130 W220 WSpeed Range0/30 - 2000 rpm0/150 - 6000 rpm0/30 - 2000 rpm0/30 - 2000 rpm0/30 - 1300 rpm0/6 - 2000 rpm0/6 - 2000 rpmViscosity Max.10000 mPas10000 mPas30000 mPas50000 mPas70000 mPas100000 mPas100000 mPas.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Request a Formal Quote

Product details
Stirring quantity max. per stirring position (H2O)40 l
Motor rating input176 W
Motor rating output126 W
Motor principleBrushless DC
Speed display7 segment LED
Speed range0/30 - 2000 rpm
Viscosity max.50000 mPas
Output max. at stirring shaft126 W
Permissible ON time100 %
Torque max. at stirring shaft60 Ncm
Speed controlstepless
Setting accuracy speed1 ±rpm
Deviation of speed measurement n > 300rpm1 ±%
Deviation of speed measurement n < 300rpm3 ±rpm
Stirring element fasteningchuck
Chuck range diameter0.5 - 10 mm
Hollow shaft, inner diameter11 mm
Hollow shaft (push-through - when stopped)yes
Fastening on standextension arm
Extension arm diameter16 mm
Extension arm length220 mm
Speed controlelectronic
Nominal torque0.6 Nm
Housing materialalu-cast coating / thermoplastic polymer
Dimensions (W x H x D)86 x 248 x 208 mm
Weight4.4 kg
Permissible ambient temperature5 - 40 °C
Permissible relative humidity80 %
Protection class according to DIN EN 60529IP 42
Voltage230 / 115 / 100 V
Frequency50/60 Hz
Power input176 W
About QuestPair

QuestPair is a platform to find and acquire laboratory equipment by connecting research organisations, universities, and companies with high-quality, affordable instruments. The platform facilitates multiple sales daily worldwide and works with partners around the globe to provide trusted, vetted products for a wide variety of scientific needs. Our in-house developed AI algorithms collect data on the usage and availability of scientific instruments, enabling us to provide tailor-made assistance in sourcing suitable laboratory equipment. With a focus on cost-effectiveness and sustainability, QuestPair has an excellent track record in streamlining acquisitions for laboratories to further scientific research and development.

Related items:
IKA Eurostar 60 Digital Overhead Stirrer-cover
IKA Eurostar 60 Digital Overhead Stirrer

IKA Eurostar 60 Digital Overhead Stirrer Viscosity Max 50000mPas Speed Range 0/30 - 2000 rpm Devi (more)ation of Speed Measurment Less than 1% Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Universally used strong laboratory stirrer for quantities upto 40 l (H2O). It automatically adjusts the speed through microprocessorcontrolled technology within the speed range of 0/30 - 2000 rpm. Safetycircuits installed ensures automatic cut-off in an anti-stall or overloadconditions. Continuous comparison of shaft speed to desired speed is maintainedand variations are adjusted automatically. This guarantees a constant speedeven with changes in viscosities of the sample. INCLUDED: The IKA Eurostar 60 Digital Overhead Stirrer includes: - EUROSTAR 60 digital - Chuck key - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 60 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)40 lMotor rating input176 WMotor rating output126 WMotor principleBrushless DCSpeed display7 segment LEDSpeed range0/30 - 2000 rpmViscosity max.50000 mPasOutput max. at stirring shaft126 WPermissible ON time100 %Torque max. at stirring shaft60 Ncm Speed controlstepless Setting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n &lt; 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 10 mmHollow shaft, inner diameter11 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmSpeed controlelectronicNominal torque0.6 NmHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)86 x 248 x 208 mmWeight4.4 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 42Voltage230 / 115 / 100 VFrequency50/60 HzPower input176 WComparison of ModelsSpecificationsEurostar 20 DigitalEurostar 20 High Speed DigitalEurostar 40 DigitalEurostar 60 DigitalEurostar 100 DigitalEurostar 200 DigitalEurostar 400 DigitalStirring Quantity Max. per Position (H2O)15 l20 l25 l40 l100 l100 l150 lMotor Rating Input70 W176 W118 W176 W186 W130 W220 WSpeed Range0/30 - 2000 rpm0/150 - 6000 rpm0/30 - 2000 rpm0/30 - 2000 rpm0/30 - 1300 rpm0/6 - 2000 rpm0/6 - 2000 rpmViscosity Max.10000 mPas10000 mPas30000 mPas50000 mPas70000 mPas100000 mPas100000 mPas.comparison-table tr td:nth-child(5) { background-color: #fffacd; } Request a Formal Quote

$2,241.00 ex VAT
United States
overhead stirrers, stirrers
People are watching right now:
LAUDA Hydro H 20 S stirring water bath-cover
LAUDA Hydro H 20 S stirring water bath

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

€2,508.00 ex VAT
€2,984.52 incl. VAT if applicable
Italy
baths or circulators
Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V-cover
Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V

Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 449 L (15.8 cu. ft.) Features - Setting temperature range from -12°C to +60°C - 449 L capacity for various laboratory applications - Equipped with inner glass door for visibility without compromising insulation - Precision temperature control with 2 Pt100 sensors, accuracy to 0.1°C - ControlCOCKPIT with TwinDISPLAY for easy programming and monitoring - Air jacket heating system ensures gentle and uniform all-around heating - Integrated AutoSAFETY with over- and undertemperature protection - Energy-efficient CFC-free cooling system with automatic defrosting The Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V is designed to deliver precise and reliable temperature control, with a setting range from -12°C to +60°C, making it ideal for sensitive applications that require exact environmental conditions. This 449 L capacity incubator features an inner glass door, allowing for clear visibility while maintaining insulation. TwinDISPLAY technology on the ControlCOCKPIT provides adaptive digital PID-microprocessor control with high-definition TFT-color displays, enabling seamless adjustments of temperature, fan speed, and program settings. With advanced safety features such as AutoSAFETY over- and undertemperature protection, visual and acoustic alarms, and dual Pt100 temperature sensors for accuracy to 0.1°C, the ICP450 offers optimal reliability. Its energy-efficient CFC-free cooling system includes an air jacket heating concept, ensuring gentle and uniform heating throughout the chamber. The incubator is equipped with AtmoCONTROL software for easy programming and data management, making it an exceptional choice for labs requiring consistent and versatile temperature management. INCLUDED: The Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software &amp; AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

$16,930.00 ex VAT
United States
incubators
Radwag WLY 6/F1/R Precision Balance-cover
Radwag WLY 6/F1/R Precision Balance

If you buy a WLY series balance by July 31, 2024, you will receive each of these products along with (more) a FREE lifetime license for the Workflow Module. Precision Balance WLY Fast and accurate weight determination thanks to the duo: the WLY multifunction balance and the PUE7 weighing terminal. Ease of operation and maximum automation of the weighing process. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations and differential weighing. The power of WLY&rsquo;s working mods. Use the potential Barcode scanners, receipt printers, label printers, RFID readers, PC equipment or an additional weighing platform &ndash; thanks to multipurpose software, WLY balance can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. DIY with WLY With WLY you will Do It Yourself: You will program on-screen keys and functional keys You will program infrared proximity sensors You will design printouts You will design text data that is displayed in an indicator display. This balance is the result of a combination of our experience and true precision. Want to generate labels? You can. With Label Editor software, you will generate: Standard labels for single products C labels for cumulative containers CC labels for containers with cumulative containers. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

€1,634.00 ex VAT
Poland
balances, precision balances
Disclaimer: QuestPair assumes no responsibility or liability for any errors or omissions in the content of this site. The information contained in this site is provided and presented on an “as is“ basis with no guarantees of completeness, accuracy, usefulness or timeliness.

Customer Service

Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.

We are available to assist you Mon-Fri, 10am - 5pm CET.

+31 (0) 73 7114717
[email protected]