IKA Combimag RCO Magnetic Stirrer

The Vortex ZX4 agitator is a modern and advanced vortex with variable speed and two operating modes, (more) sensor or continuous. Thanks to the revolutionary IR sensor mode, an infrared (IR) system detects the presence of the test tube and the instrument is activated automatically: less user operations, more comfort in the working environment Technopolymer structure and ergonomic design guarantee excellent chemical resistance and considerable stability on the laboratory bench, and can be used on many surfaces. Wide range of accessories. IR sensor, VELP patent VELP Scientifica is the only company in the world to supply the technological and revolutionary IR system: as soon as the test tube is detected by the sensor, the latter automatically activates the instrument, without the need for any pressure from the laboratory technician. Compared to the classic pressure mode, the patented IR sensor system guarantees a drastic reduction of the stresses perceived by the operator, increasing the comfort of the working environment. Flexibility, Numerous Accessories ZX4 is an extremely versatile solution, being able to be combined with a variety of platforms. The easy and safe attachment of the platforms is done with a simple push, and guarantees excellent performance in the mixing of many types of tubes and containers. - Variable speed operation, electronically controlled up to 3000 rpm - Wide choice of accessories for tubes, plates and bottles - Universal voltage / frequency model - The accessories adapt with a simple push - Excellent resistance to chemical agents thanks to the technopolymer casing - Excellent stability with zinc alloy base - Large, non-slip rubber feet to stay in the desired position - IP 42 protection against particles and liquids - Designed for maximum durability and backed by a 3-year warranty

This listing is for 1 0f 3 Velp Scientific T.ARE Heating Magnetic Stirrer. The unit is in full work (more)ing condition and is ready for immediate release.

Memmert SV2945 Stirring device with support frame for 29 and 45 L models (requires special cover) Ne (more)w equipment in its original packaging Memmert reference: SV2945 Stirring device with support frame for 29 L and 45 L Memmert water and oil baths

Speed I: 25 – 250 rpm Speed II: 200 – 2000 rpm Dimensions (DxHxW): 280 x 280 x 100 mm

Ohaus Guardian 2000 e-G21ST07R Magnetic Stirrer, 115V The Ohaus Guardian 2000 Series Hotplates, Stir (more)rers, and Hotplate Stirrers are ideal for education and other lab environments that require affordable, everyday fast heating and reliable stirring up to 15L. All three sizes offer simple knob control to easily adjust the heating and stirring functions. The durable housing includes a built-in support rod holder which accepts the optional support rod. Stirring models include PTFE coated stir bars. The Guardian 2000 Series units feature powerful stirring and fast heating at an economical price. Safely heat up to 500°C and stir up to 15L with easy-to-use knob control for simple and reliable everyday heating and stirring in the lab. Designed to last - the rugged metal housing has a spill resistant design for long life in the lab under harsh conditions. The smooth, chemical-resistant ceramic top plate is perfect for easy clean up. Safety is also of utmost importance, and the prominent hot top indicator light illuminates when the heater is above 40°C, keeping the end user safe during all heating applications. INCLUDED: The Ohaus Guardian 2000 e-G21ST07R Magnetic Stirrer, 115V includes: - PTFE-Coated Stir Bar (2.5 cm) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark OS40L Overhead Stirrer, 40L includes stand, and 4 arm propeller, 115V Benchmark’s Overhead (more) Stirrers feature high torque and advanced digital microprocessor control for smooth mixing of low and medium viscosity samples. Speed and run time are accurately set and monitored on the LCD screen. Both the 20L and 40L capacity models are supplied with a 4 arm stainless steel propeller, additional steel and Teflon accessories are available. A feed-through chuck holds accessory shafts firmly in place and is easily tightened and loosened without tools. The overhead stirrers are protected from damage by sensors that shut down operation in the case of high viscosity or obstruction, while a splash cover protects the connection mechanism from potential corrosion. Unlike most mixers, the Benchmark series is also supplied with a support stand and mounting hardware. The stirrer easily and securely attaches to the stand for compatibility with a variety of vessels, up to 24 inches high.INCLUDED: The Benchmark OS40L Overhead Stirrer, 40L includes stand, and 4 arm propeller, 115V includes: - Stirrer Stand - 4 Arm Propeller - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Thermo Scientific Multidrop 832 microplate dispenser The Multidrop 384 is an automatic, programmable (more), eight-channel microplate dispenser. It has a peristaltic pump for rapid and continuous dispensing of liquids into 96 and 384-well microplates. Dispenser of microplates 96 and 384 Accuracy, speed and reliability in dispensing. Possibility of dispensing by selecting the number of columns . External dimensions : 31x32x18 cm Weight : 7 Kg Dispensing accuracy: 5 µl: ±3% (typical) 20 µl: ±2% (typical) 100 µl: ±1% (typical) Dispensing speed: 96-well plate:20 µl in 5 seconds; 50 µl in 8 s 384 well plate: 20 µl in 20 s; 50 µl in 25 s Year of manufacture : 2005

Nominal volume flow: 790 m³/h Dimensions (WxDxH): 1800 x 750 x 1100 mm

HETTICH MIKRO 220 centrifuge. Rotor with adapters for 15 ml falcon tubes. 12X35G Speed ​​6,000 rpm.  (more)Temperature control. RunSilent™ silencing system (≤ 65 dB). Cover with safety lock. Robust and stable. Includes manual. Rotor supports up to 60 2.0/1.5ml tubes per cycle. Maximum speed: 18,000 rpm. Density 1.2 kg/dm3.

F2 Mass Standard - knob weights, service case. Nominal value - 200 kg.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Labconco Heated Product Shelf Chamber, 3 shelvesFor use with any FreeZone Freeze Dryer manufactured  (more)afterJuly 2017. Chambers allow for drying of bulk samples, or drying of serumbottles, vials or microplates. The 10" diameter shelves are wireless andremovable so that they may be placed in a freezer for pre-freezing. Each shelfis height adjustable to accommodate a broad variety of sample sizes. Chamberconnects to a FreeZone Freeze Dryer for control and recording of shelftemperature from the Lyo-Works display. Temperature may be set from -20C (-4°F) to +60C (+140F). Each Chamber includes a 12" diameter clear acryliccylinder, vacuum release valve, cap for vacuum port and 8" diameteropening to collector on bottom of chamber. Will fit 10.12” or 14.0” diametercondensers. Short Chambers include three shelves and three temperature probes.Tall Chambers include five shelves and five temperature probes. INCLUDED: The Labconco 780801000 Heated Product Shelf Chamber, 3 shelves, 115V, 60Hz includes: - Communication Cable - Power Cable - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty