Heidolph 036300506 Overhead Stirrer Visco Jet Crack Impeller, 120mm (Stainless Steel)

Yamato LT-500A Overhead Stirrer, 100-120V Speed Range 15~600rpm Max Torque 1.0N•m (10.0kgf•cm) Moto (more)r DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with higher torque for high viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. INCLUDED: The Yamato LT-500A Overhead Stirrer, 100-120V includes: - Clamp - Safety Cover - Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Eurostar 20 High Speed Control Overhead Stirrer Stirring quantity max. per stirring position ( (more)H2O) 20 l Deviation of speed measurement n 300rpm 1 ±% Temperature Measuring Range -10 - +350 °C Features - Multilingual TFT display - Programmable functions - Integrated temperature measurement - Interval operation - Timer function - Adjustable safety circuit - Locked function - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display - H 67.60 temperature sensor and WH 11 WiCo holder included in delivery High speed laboratory stirrer designed with a removable wireless controller and a digital TFT display. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/150 - 6000 rpm. The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters, and an update of the current firmware. An integrated torque trend display is provided for the measurement of viscosity changes. The included precision stirrer shaft is 280 mm long and has a maximum immersion depth of 220 mm. INCLUDED: The IKA Eurostar 20 High Speed Control Overhead Stirrer includes: - EUROSTAR 20 high speed control - R 6000 precision shaft - Open-end wrench - Hook spanner - H 67.60 Temperature sensor, stainless steel - WH11 - OS 1.0 WiCo power supply unit - USB Cable - USB A to Micro-B, 2 m - USB cable micro A – micro B 2.0 - Screw driver - Protective cover for WiCo contact - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 20 High Speed Control Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)20 lMotor rating input176 WMotor rating output125 WMotor principleBrushless DCSpeed displayTFTSpeed range0/150 - 6000 rpmIntermittent operationyes Viscosity max.10000 mPas Output max. at stirring shaft125 W Permissible ON time100 %Torque max. at stirring shaft20 NcmSpeed controlsteplessSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningspecial output shaftConnection for ext. temperature sensorPT1000Temperature displayyesFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmTorque displayyesNominal torque0.2 NmTorque measurementtrendDeviation of torque measurement I6 ±NcmTimeryesTimer displayTFTTime setting range1 - 6000 minTemperature measuring range-10 - +350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)86 x 325 x 230 mmWeight5.242 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 40RS 232 interfaceyesUSB interfaceyesVoltage230 / 115 / 100 VFrequency50/60 HzPower input176 WComparison of IKA Eurostar Control Overhead StirrersSpecsEurostar 20Eurostar 60Eurostar 100Eurostar 200Eurostar 400Stirring quantity max. per stirring position (H2O)20 l40 l100 l100 l150 lSpeed range0/150 - 6000 rpm0/30 - 2000 rpm0/30 - 1300 rpm0/6 - 2000 rpm0/6 - 2000 rpmViscosity max.10000 mPas50000 mPas70000 mPas100000 mPas100000 mPasTorque max. at stirring shaft20 Ncm60 Ncm100 Ncm200 Ncm400 NcmPower input176 W176 W186 W130 W226 WSetting accuracy speed1 ±rpm1 ±rpm1 ±rpm1 ±rpm1 ±rpm.comparison-table tr td:nth-child(2) { background-color: #fffacd;}

Heidolph 036300400 Overhead Stirrer Impeller, PR 30 Pitched-Blade Due to its blade dimensions, the p (more)itched-blade impeller PR 30 is ideal for solutions, emulsions and suspensions in vessels with the following characteristics: ideal vessel diameter: 145-290 mm, ideal ground clearance: 29-58 mm, ideal filling level: 145-290 mm, and ideal volume: 2,400-19,200 ml. The pitched-blade impeller PR 30 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300400 Overhead Stirrer Impeller, PR 30 Pitched-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph 036300380 Overhead Stirrer Impeller, TR 20 Radial Flow Due to the jagged shape of the stirr (more)er blade, the radial flow impeller TR 20 is ideally suited for the construction of emulsions and the gassing or foaming of liquids in vessels with the following characteristics: ideal vessel diameter: 80-140 mm, ideal ground clearance: 14-28 mm, ideal filling level: 80-140 mm, ideal volume: 400-2,200 ml. The radial-flow impeller TR 20 has a total length of 400 mm and is made of stainless steel. Its stirrer shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300380 Overhead Stirrer Impeller, TR 20 Radial Flow includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Range 1: 60 – 500 rpm Range 2: 240 – 2000 rpm

VACUUBRAND ME 2 NT Diaphragm Pump Ultimate Vacuum 70 mbar / 52 torr Maximum Pumping Speed 1.4 CFM a (more)t 60Hz Number of Heads/Stages 1/1 Features - Whisper quiet and very low vibration. - Powerful, even for parallel operation of several applications. - High performance even at low vacuum levels. - Very low vibration. - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs. One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors at low vacuum requirement. In contrast to waterjet pumps they do not consume water and therefore do not produce any contaminated waste water in daily use. Typical applications are vacuum ovens, filtrations and multi-port manifolds for medium throughput, as well as pumping of gases and oil-free evacuation in general. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. Diaphragm vacuum pumps are an excellent choice for applications with non-corrosive gases and vapors. The materials used in these pumps like aluminum and special plastics are opening a wide range of applications. The highly flexible fabric-reinforced double diaphragm made of FKM is ideal for extended operating life. INCLUDED: The VACUUBRAND ME 2 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Tuttnauer 5075ELVC LabLine Floor Standing Autoclave Introducing the Tuttnauer Autoclave 5075ELVC, a  (more)highly sophisticated and dependable sterilization system that ensures the highest levels of efficiency and reliability. Its robust design and large capacity make it suitable for numerous applications in various industries.The 5075ELVC model features a spacious 160L chamber, boasting a diameter size of 50cm and a depth of 75cm. It is crafted from top-grade stainless steel 316 (1.4571), ensuring durability, while the housing and door material are made of stainless steel 304 L for additional sturdiness.The sterilizer is equipped with a host of accessories that support its operation, including an internal thermometer, a water-sensing electrode, an external pressure gauge, and a printer, all included standard. For recording and transferring data, a USB port is also provided. For user convenience, the sterilizer comes with a set of 2 large wire baskets.Its maximum operating temperature is 135C, suitable for a wide range of sterilization requirements. It runs efficiently on a 3-phase 230V power supply and requires a power input of 9.0KW. Please note that these units do not come with a plug; a NEMA (L15-30P & R or L14-30R & P) will need to be installed.What sets the 5075ELVC apart is its cooling function, which can be activated by connecting the unit to a source of compressed air (1/2" 3-4 Bar [44-58 psi]). Furthermore, the unit also accommodates connections for tap water (1/2" 3-4 Bar [29-44 psi]) and mineral-free water (1/2" 2-3 Bar [29-44 psi] RO or Distilled). The drain requirement is 2" Min Withstanding temperature of 80C (176F).Built for efficiency and long-lasting use, the Tuttnauer Autoclave 5075ELVC represents an exceptional investment for any organization in need of reliable sterilization solutions. However, please note that the unit does not include wheels with a lock feature.Overall dimensions of the unit are 110cm x 86.6cm x 71.5cm or, in inches, 43" x 34" x 28". The part number for this model is 023210990. Trust the Tuttnauer Autoclave 5075ELVC for your sterilization needs, where precision and reliability come standard.INCLUDED: The Tuttnauer 5075ELVC LabLine Floor Standing Autoclave includes: - Power Cord - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Labconco FilterMate Portable Exhauster, Carbon Filter required (not included) One FilterMate is  (more)capable of exhausting 24 in., 36 in. and 48 in. wide enclosures (22 3/4 in.H models) Powder-coated steel exterior base and rubber feet Quiet, nonsparking, variable-speed, motorized impeller Negative pressure plenum to capture and refilter leaked fumes INCLUDED: The Labconco 3970001 FilterMate Portable Exhauster, Carbon Filter required (not included), 115V, 60Hz includes: - 8 Feet of 5" ID Gray Hosing - Two Clamps - 5" OD Upper Transition Adapter - Xpert Balance Enclosure - Protector XVS Ventilation Station - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF UN820.3FTP IP44 Diaphragm Pump Ultimate Vacuum 8 mbar (abs.) Maximum Flow Rate 20L/min (1.2 m3/ (more)h) Protection Class IP44 Features - 100% oil free transfer - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically-resistant PTFE/FFPM flowpath - Suitable for aggressive or corrosive gases and vapors - Maintenance-free - Environmentally friendly - Compact, quiet and reliable TheKNF UN820.3FTP IP44 Diaphragm Pump isa dry-running device used in a wide range of laboratoryapplications. They transfer, compress and pump down without contamination. Theheart of these very compact pumps is a KNF structured diaphragm. This patenteddiaphragm was stress-optimized using the Finite Elements method. As a result,KNF was able to make the pump smaller while increasing the service life of thediaphragm. This pump is 115V. INCLUDED: The KNF UN820.3FTP IP44 Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

p=0…1.5 bar 230V 5.5 VA 3x including foot pedal 1x w/o foot pedal