Heidolph 036300490 Overhead Stirrer Visco Jet Impeller inoJET, 80mm (POM)

Maximum stirring quantity (H2O): 15 l Speed: 50 – 2000 rpm Setting accuracy speed: ±1 rpm Deviation  (more)of speed measurement (>300rpm): ±1 % Deviation of speed measurement (<300rpm): ±3 rpm Maximum viscosity: 10000 mPas Maximum torque at stirring shaft: 20 Ncm Nominal torque: 0.2 Nm Deviation of torque measurement: ±3 Ncm Torque measurement: trend Time setting range: 0 – 6000 min Connection for external temperature sensor: PT1000 Temperature measuring range: -10°C – 350°C Temperature measurement resolution: 0.1 K Dimensions (WxHxD): 70 x 193 x 154 mm Weight: 1.56 kg Equipped with: R 1342 4-bladed propeller stirrer Standard stirring element. For drawing the material to be mixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds. Stirrer Ø: 50 mm Shaft Ø: 8 mm Shaft length: 350 mm IKA tripod scale A stand with an integrated scale and data interface. The IKA scale provides increased comfort and safety for your laboratory applications. For example, your stirrer can hang on the stable support rod. The quantities of samples to be added are weighed immediately and continuously documented during the stirring process. Sample weight of up to 6 kg The intelligent tripod scale has a weighing range of up to 6 kg with a resolution of 1 g. It is therefore particularly suitable for the direct and controlled addition of sample material while stirring. Weighing range: 5 – 6000 g Weighing accuracy: ±6 g Plate dimension: 200 x 200 mm Dimensions (WxHxD): 213 x 570 x 391 mm Weight: 5.2 kg

Yamato LT-400BA Complete Overhead Stirrer with Stand &amp; 60mm 4-Blade Propeller, 115V Speed Range  (more) 115~600rpm Max Torque 0.5N•m (5.0kgf•cm) Motor DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with well-blanced speed and torque for medium viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. Set includes stand, rod, stainless steel shaft and 60mm 4-blade propeller. Speed range 15~600 rpm. INCLUDED: The Yamato LT-400BA Complete Overhead Stirrer with Stand &amp; 60mm 4-Blade Propeller, 115V includes: - Stand and Rod - Clamp, Safety Cover, Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Microstar 30 Control Overhead Stirrer Speed Range 0/30 to 500 RPM Viscosity Max. 20,000 mPas St (more)irring Quantity Max. 20 l Features - Hardened glass enclosed, fast response display for maximum visibility and chemical resistance - State-of-art vibration sensors detect deviations from permissible thresholds and automatically stop the process - Clear display for all essential information at a glance - Integrated timer / counter for the control of kinetic sensitive reactions and reminders - Viscosities up to 20,000 mPas and volumes of up to 20 l - Continuously adjustable speed between 0/30 – 500 rpm - USB interface, e.g. for documenting parameters using labworldsoft® or installing firmware updates - Intuitive and simple handling; touch-sensitive surface for long service life - Temperature reading on display - Chemical resistant housing - Key lock function - Microprocessor-controlled speed governor for constant rotational speed, even with changes in viscosity The new MINISTAR series by IKA: Developed using the latest cutting-edge technology, these high-tech overhead stirrers with compact designs are ideal for special applications. Combining high performance with particular excellence, they require minimal space and come with a lifetime guarantee. These products offer incredible stirring capabilities and control, making them a great cost-effective option for laboratories. With features like hardened glass enclosed displays, state-of-the-art vibration sensors, and microprocessor-controlled speed governors, the MINISTAR series ensures precision and reliability.Capable of handling a wide range of viscosities and volumes, these stirrers provide continuously adjustable speeds, making them versatile and efficient for various applications. See for yourself:

IKA Microstar 15 Digital Overhead Stirrer Stirring quantity max. (H2O) 10 L Speed Range 0/50 - 100 (more)0 rpm Viscosity max. 8000 mPas Features - Compact design saves space in the laboratory - Constant torque throughout the entire rpm range - Easy operation with a stable rotary knob and clear LED display - Rapid software updates via USB interface - Durable brushless DC motor ensures reliable performance The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design.Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee. See for yourself: INCLUDED: The IKA Microstar 15 Digital Overhead Stirrer includes: - MICROSTAR 15 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - USB Cable - USB A to Micro-B, 2 m - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Microstar 15 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)10 lMotor rating input32 WMotor rating output22 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 1000 rpmViscosity max.8000 mPasOutput max. at stirring shaft15.7 W Permissible ON time100 % Torque max. at stirring shaft15 Ncm Speed controlTurning knobSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n &lt; 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.15 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)60 x 173 x 126 mmWeight1.26 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input32 WPower input standby0.3 WDC Voltage24 VCurrent consumption1300 mAComparison of ModelsSpecificationsIKA Microstar 15 Control Overhead StirrerIKA Microstar 15 Digital Overhead StirrerIKA Microstar 30 Control Overhead StirrerIKA Microstar 30 Digital Overhead StirrerIKA Microstar 7.5 Control Overhead StirrerIKA Microstar 7.5 Digital Overhead StirrerStirring quantity max. (H2O)10 l10 l20 l20 l5 l5 lMotor rating input32 W32 W32 W32 W32 W32 WSpeed displayLCDLEDLCDLEDLCDLEDSpeed range0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpm0/30 - 2000 rpm0/50 - 2000 rpmViscosity max.8000 mPas8000 mPas20000 mPas20000 mPas4000 mPas4000 mPasTorque max. at stirring shaft15 Ncm15 Ncm30 Ncm30 Ncm7.5 Ncm7.5 NcmTime setting range0 - 6000 minN/A0 - 6000 minN/A0 - 6000 minN/ATemperature displayYesN/AYesN/AYesN/AUSB interfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

IKA Eurostar 100 Digital Overhead Stirrer Speed Range 0/30 to 1,300 RPM Viscosity Max. 70,000 mPas (more) Stirring Quantity Max. 100 l Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Powerful laboratory stirrer for highly viscous applicationsand intensive mixing for quantities up to 100 l (H2O). It automatically adjuststhe speed through microprocessor controlled technology within the speed rangeof 0/30 – 1300 rpm. Safety circuits installed ensures automatic cut-off in ananti-stall or overload conditions. Continuous comparison of shaft speed todesired speed is maintained and variations are adjusted automatically. Thisguarantees a constant speed even with changes in viscosities of the sample.

Heidolph 036300440 Overhead Stirrer Impeller, PR 39 Pitched-Blade Due to its stirrer blade dimension (more)s, the PR 39 pitched-blade impeller is ideal for homogenizing very viscous media in vessels with the following characteristics: ideal vessel diameter: 188-375 mm, ideal ground clearance: 38-75 mm, ideal filling level: 188-375 mm, and ideal volume: 5,200-41,400 ml. The pitched-blade impeller consists of a PTFE mixing blade and a PTFE-coated stainless-steel shaft. The stainless-steel core ensures the stability of the stirrer shaft and the secure attachment in the overhead stirrer. The diameter in the clamping area is 6.5 mm; the stirrer shaft with the thick-walled PTFE coating has a diameter of 8 mm. Due to its anti-adhesive property (non-stick coating), the pitched-blade impeller is easy to clean and can be used up to a maximum application temperature of 250°C. INCLUDED: The Heidolph 036300440 Overhead Stirrer Impeller, PR 39 Pitched-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

BOD Sensor is an extremely reliable innovative solution for the determination of BOD, without the us (more)e of mercury. Easy to use, fast and simple. It screws directly onto the bottle containing the sample and a pressure transducer microprocessor transfers the BOD value directly to the display (in mg / l) and automatically stored in the BOD sensor (5 measurements at 24 hour intervals, offering the possibility of making the analysis even during the weekend). The BOD value can also be obtained directly from the display at any time, even after five days. Measurement is available on 4 different scales - 90ppm, 250, 600 and 999 BOD. For higher values, the measurement can be measured by diluting the sample. The BOD Sensor System 6 is a complete package for analyzing 6 samples simultaneously, consisting of a 6-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption caps and magnetic stir bars. The BOD Sensor System 10 is a complete package for analyzing 10 samples simultaneously, consisting of a 10-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption undercaps and magnetic stir bars. The stirring base has been designed to meet the user's needs, it is comfortable, guarantees a high quality stirring and the small footprint allows to accommodate up to 5 bases of 6 positions (30 samples) or 3 of 10 positions ( 30 samples) in a VELP incubator (FOC 200E). Determine the BOD value in 5 steps! To better analyze the BOD values ​​with the innovative VELP Scientifica systems, based on the respirometric technique, capable of providing highly reliable results, just 5 easy and simple steps are enough: 1. Add the magnetic stir bar to the dark glass bottle, add the sample and place the CO2 trap filled with the necessary reagents 2. Incubate everything 3. Screw in the sensor 4. Monitor the activity of microorganisms 5. Read the BOD value (ppm or mg / l), based on the change in pressure inside the bottle due to the activity of microorganisms Technical features: Sensor display: 3-digit LED display Bod measurement: mg/l (ppm) directly on the display BOD scales: 90, 250, 600, 999, 4000 ppm, Higher values after dilution Bottle volumes:  500 ml Data storage: BOD values at 24h intervals Sensor construction material: Technopolymer Power: BOD Sensor System 6 2 W; BOD Sensor System 10 2 W Sensor battery type: CR 2430 Power supply: BOD Sensor System 6 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz BOD Sensor System 10 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz

Ohaus light-duty orbital shakers These reliable OHAUS laboratory shakers are instruments designed fo (more)r applications with loads up to 4 kg. To optimize sample mixing, two stirring orbits and speed ranges are available. One digital model intended for use with microplates, two digital models designed for use with accessories, and an affordable analog unit for daily shaking. All models are equipped with triple eccentric drive and integrated chip control systems that ensure precise, stable and reliable platform shaking for laboratories and beyond. - Flexible: with tray and a non-slip mat or, by removing the mat, the unit can be customized with over 20 accessories - Affordable and efficient for daily laboratory shaking needs Applications ELISA tests, cell cultures, immunoassays, protein studies, bacterial and yeast cultures, dyes / bleaches, absorption techniques, DNA studies Display Easy-to-read independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models) and knobs with markings for basic controls (analog models). Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum Construction features Non-slip mat (29.9x22.2 cm) included in all models except the model with microplates

LABORATORY OVEN SLW SMART POL-EKO SLW - FORCED AIR CONVECTION The SLW series laboratory ovens are de (more)signed to reach high temperatures, up to 300 °C. Available from 15 to 1000 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use, just like your smartphone. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - 4,3", clear, full colour touch screen - USB and LAN ports for data transfer - multi-segment time and temperature programs - loop function up to 255 times or endless - adjustable start delay feature - adjustable ramps - recording of min, average and max temperature value for each segment - overview of set and current parameters while operating - operating in temperature or time priority mode - fan speed control in the range of 0 … 100% or 10% … 100% (depending on the chamber capacity) - temperature sensor fail alarm - possibility of temperature calibration by the User - power failure control system (program continued after restoring power) - visual and sound alarm - internal memory for programs and data storage - operating with gloves on - event registry - user manual for direct download QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLW SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLW SMART SERIES The 10 models of the SLW series cover most of your needs: from mini oven to the 1000 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of the models. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for incubator models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

This Tefcold FS 1380 Bottle Cooler Lab Refrigerator was removed from a working lab where it was surp (more)lus to requirements. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition with minor marks. Includes: 7 x Shelves 40.5 x 50cm

Memmert ICH750L Stability Climate Chamber w/ Light 749L, 115V Temperature Range -10°C to 60°C w/o H (more)umidity (+10°C to 60°C w/ Humidity and/or Light) Humidity Control 10 to 80% RH Chamber Volume 749L (26.5 cu. ft.) Features - Superior temperature and humidity homogeneity for reliable stability testing - Complies with international standards like ICH, WHO, EMA, ASEAN, GMP, GLP, GCCP - Active humidification and dehumidification system for precise control - Integrated illumination box with programmable daylight (6,500 K) and UV light for precise light control - Large-area air jacket on four sides ensures effective thermal transfer - Hermetically sealed interior for efficient water usage once setpoints are reached - Dual high-grade platinum temperature sensors with mutual monitoring for continuous operation - Double doors with wide-area interior glass to prevent contamination and temperature fluctuations - Intuitive operation with Memmert ControlCOCKPIT and AtmoCONTROL software - Constructed from high-quality, corrosion-resistant stainless steel - Integrated data logger and multiple interfaces for advanced programming and documentation options - Condensation-free operation within specified temperature-humidity ranges - Programmable temperature and humidity ramps via AtmoCONTROL software The Memmert ICH750L Stability Climate Chamber w/ Light 749L, 115V sets the standard for stability testing, excelling with its precise control of both temperature and humidity, essential for rigorous testing standards such as ICH, WHO, EMA, ASEAN, GMP, GLP, and GCCP. This climate chamber offers a temperature range of -10°C to 60°C without humidity and +10°C to 60°C with humidity, alongside a humidity control range of 10 to 80% RH. Its exceptional temperature and humidity homogeneity is achieved through a large-area air jacket on all four sides and a digitally controlled active humidification and dehumidification system. A notable feature of the ICH750L is its double-door design, which includes a wide-area interior glass door to prevent contamination and maintain temperature stability while providing clear visibility of the chamber's contents. The chamber's interior is hermetically sealed, ensuring efficient water use once the desired setpoints are reached, provided the door remains closed. Additionally, the chamber is equipped with two high-grade platinum temperature sensors with mutual monitoring to ensure uninterrupted, reliable operation even if one sensor fails. Operation is made simple with the Memmert ControlCOCKPIT and AtmoCONTROL software, which allow for intuitive navigation and easy programming of temperature and humidity ramps. The ICH750L is almost exclusively made from high-quality, corrosion-resistant stainless steel, making it both durable and easy to clean. A wide range of programming and documentation options are available through its interfaces, integrated data logger, and software, ensuring that this climate chamber is not only robust but also adaptable to various scientific and industrial applications. The ICH750L model includes an advanced illumination box integrated into the upper interior, equipped with fluorescent lamps providing cold white light (daylight: light color 865, 6,500 K) and UV radiation within the 320 to 400 nm spectral range. This setup replicates standard light D65, essential for tests that require precise light conditions. Both daylight and UV light can be individually programmed through the controller, offering tailored adjustment for specific testing needs. Light intensity is maintained with high accuracy, at ± 6% for cold white light and ± 10% for UV light, ensuring consistent conditions for reliable test results. INCLUDED: TheMemmert ICH750L Stability Climate Chamber w/ Light 749L, 115V includes: - Illumination Box - 2 x Stainless Steel Wire Shelves - Water Tank w/ Connection Hose - USB Drive w/ Software &amp; AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).