Heating magnetic stirrer HEIDOLPH MR 3001

ESP is a very compact ultra-flat magnetic stirrer, with no moving mechanical components and maintena (more)nce-free. The control panel is protected from possible damage caused by any leaks of liquids, thanks to a special groove that favors the sliding of the liquid. Excellent agitation is guaranteed by the smooth start and the quickly reachable maximum speed of 1100 rpm. In short: - Maintenance free: no moving parts - The control panel is protected against liquid spills with a drain groove - The technopolymer casing resists chemicals - Accepts bottles up to 5 liters - Designed for maximum durability and backed by a 3 year warranty - Ergonomic - very low height - Speed ​​regulation up to 1100 rpm - Universal mains voltage / frequency range - Light - Ideal surface for viewing particles and color variations - Soft start but quickly reaches the set speed - Ideal for microtiter, microbiology and biochemistry

IKA Fisher Brand Color Squid Magnetic Stirrer model: Color Squid Technical characteristics: 100 – 24 (more)0 V, 4 W. Continuously adjustable speed: 0 to 1500 rpm. Tray dimensions (ø): 11 cm External dimensions (D)x(H)x(W): 130 x 135 x 50 mm Stirring capacity: 0.8 liters (H2O) Weight: 1kg

VWR LAB DISC magnetic stirrer Ultra-flat and compact magnetic stirrer with no moving parts. Reverses (more) the direction of rotation every 30 s to ensure optimal mixing. Direction of rotation reversible adjustable Wear-free training Plate and housing made of chemical resistant materials Non-slip and stable Model: Lab Disc Speed range: 15 - 1500 min⁻¹ Max mixing capacity H₂O: 800 ml Plate material: polyester Plate, LxW: Ø 100 mm Weight: 0.3 kg Input/output power: 5/3 W W×D×H: 117×180×12 mm

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

Scilogex OS40-Pro Overhead LCD Digital StirrerThe Scilogex OS40-Pro Overhead LCD Digital Stirrer fea (more)tures a maximum capacity of 40L, accurate microprocessor stirring speed control guarantees speed precision, anti-spill microprocessor control slow start up prevents sample spills, a through-shaft design allows for easy adjustment of the impeller position, LCD display and control, set value and actual value can be displayed for real-time monitoring of torque and speed. INCLUDED: The Scilogex OS40-Pro Overhead LCD Digital Stirrer includes: - Key of Drill Chuck - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Microstar 30 Digital Overhead Stirrer Stirring quantity max. (H2O) 20 L Speed Range 0/50 - 500 (more) rpm Viscosity max. 20000 mPas Features - Compact design saves space in the laboratory - Constant torque throughout the entire rpm range - Easy operation with a stable rotary knob and clear LED display - Rapid software updates via USB interface - Durable brushless DC motor ensures reliable performance The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee. See for yourself: INCLUDED: The IKA Microstar 30 Digital Overhead Stirrer includes: - MICROSTAR 30 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Microstar 30 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)20 lMotor rating input32 WMotor rating output22 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 500 rpmViscosity max.20000 mPasOutput max. at stirring shaft15.7 WPermissible ON time100 %Torque max. at stirring shaft30 Ncm Speed controlTurning knob Setting accuracy speed1 ±rpm Deviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.3 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)60 x 173 x 126 mmWeight1.26 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input32 WPower input standby0.3 WDC Voltage24 VCurrent consumption1300 mAComparison of ModelsSpecificationsIKA Microstar 15 Control Overhead StirrerIKA Microstar 15 Digital Overhead StirrerIKA Microstar 30 Control Overhead StirrerIKA Microstar 30 Digital Overhead StirrerIKA Microstar 7.5 Control Overhead StirrerIKA Microstar 7.5 Digital Overhead StirrerStirring quantity max. (H2O)10 l10 l20 l20 l5 l5 lMotor rating input32 W32 W32 W32 W32 W32 WSpeed displayLCDLEDLCDLEDLCDLEDSpeed range0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpm0/30 - 2000 rpm0/50 - 2000 rpmViscosity max.8000 mPas8000 mPas20000 mPas20000 mPas4000 mPas4000 mPasTorque max. at stirring shaft15 Ncm15 Ncm30 Ncm30 Ncm7.5 Ncm7.5 NcmTime setting range0 - 6000 minN/A0 - 6000 minN/A0 - 6000 minN/ATemperature displayYesN/AYesN/AYesN/AUSB interfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Leica Diavert Inverted Microscope w/ 4 x Objectives & 465 Power Supply This was removed from a u (more)niversity lab where it was surplus to requirements. The unit is in reasonably good cosmetic condition. There are some light tape marks from general use, as well as some patina from age. It is in good working order. Included are; 1 x Leitz Phaco A 0.25 L62 Lamp 2x Eyepieces:PERIPLAN GF 12.5x /20 M lietz Wetzlar Germany 4x Leitz Wetzlar Objectives: 1x 170/- 4/0.121x 170/- L32/0.4 Phaco 11x 170/- L20/0.32 Phaco 11x 170/- 10/0.25 Phaco Power Supply:Model. 465

Edinburgh Instruments Time-Correlated Single Photon Counting System This system was removed from a u (more)niversity lab where it was surplus to requirements. Although all units successfully powered on, we cannot test it completely at our facility. Condition varies as stated below each item. The system includes the following components: Edinburgh Instruments Spectrometer SystemSerial#: 178 The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the control box, PMT Cooler Controller & PC with Software. The following tests were conducted: 1. Excitation Mono Successfully Initialised2. Emission1 Mono Successfully Initialised3. Excitation Polariser Successfully Initialised4. Emission1 Polariser Successfully Initialised5. Sample Holder Temperature Successfully Read6. nF Iris did not initialise (nF Iris Cable present but unable to find port)7. TAC Range & Scaler Successfully Initialised All tests were performed using CD900 Test software. However, unable to open EAI Level 2 Edinburgh Instruments CD900 Software due to requiring Software Protection Device. Additionally, the system includes: Edinburgh Instruments Nanosecond Flashlamp HeadModel: nF900Serial#: 095Mfd: 03/2000 The item is in good cosmetic condition and pairs successfully with the Spectrometer System. Edinburgh Instruments nF900 ControllerModel: nF900Serial#: 092Mfd: 03/2000 The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller & PC with Software. All cables shown at the rear are included. Edinburgh Instruments CD900 ControllerModel: CD900Serial#: 112Mfd: 03/2000 The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller & PC with Software. All cables shown at the rear are included. Lastly, the system includes an Elonex ProSentia PC, iiyama ProLite B2290HS Monitor, Elonex Keyboard & Microsoft. All items are in good cosmetic condition and in full working order. The PC runs Windows 98 and the software installed includes EAI Level 2 (requires Software Protection Device), F900 test, and Cd900t (requires Software Protection Device).

IKA C-MAG HS 7 hotplate stirrer. 180*180 mm glass-ceramic hotplate. Stirring capacity 10 L. Speed ra (more)nge from 100 to 1500 rpm on a scale from 0 to 6. Temperature range from 50 to 500 °C. Heating rate 5 °C/min. LCD indicator. Fixed 550 °C safety circuit. Hot surface warning. to protect against burns. Digital indicator of error codes. It has small defects in the paint due to splashes. Dimensions (W x H x D) 215*105*330 mm. Weight 5 kg. User manual. IKA C-MAG HS 7 hotplate stirrer. New magnetic stirrer with heating and glass ceramic hotplate, characterized by very high chemical resistance.

Transponder card reader is used for quick identification and logging of operators to a weighing syst (more)em or identification of vehicles on a weighbridge. CK-02/3 is designed for scales equipped with terminals PUE C41H and PUE 5 series. It is installed next to the terminal. Communication through RS 232, power supply 5V from scale terminal. Area of Use: Additional equipment of load cell based industrial scales; Identification of weighing instrument operator; Identification of vehicles on weighbridges. Design: Transponder card reader CK-02 is manufactured in plastic housing. Intended Use: Designed for scales equipped with terminals PUE C41H and PUE 5 series. It is installed next to the terminal. Communication through RS 232, power supply 5V from scale terminal.

Ohaus Aquasearcher a-AB41PH-B pH Meter The OHAUS AQUASEARCHERTM AB41PH bench meter is designed with  (more)reliable measurement and precise performance in mind. The i-Steward ensures repeatable and consistent measurement accuracy for optimal peace of mind and can assist with compliance with 21 CFR Part 11 regulations.INCLUDED: The Ohaus Aquasearcher a-AB41PH-B pH Meter includes: - Power Cord - a-AB41PH Benchtop Meter - Stand-Alone Electrode Holder - Two Year Manufacturer's Warranty

Julabo CORIO CP-1000FW Refrigerated Circulator, 115V/60Hz Working Temperature Range -50°C to 200°C  (more)Cooling Capacity 1000W at 20°C Refrigerant R449A Features - For internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB & RS232 connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Water-cooled refrigeration system - Class III (FL) according to DIN 12876-1 The Julabo CORIO CP-1000FW Refrigerated Circulator, 115V/60Hz features an operating range of -50…+200°C and ± 0.03°C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Water-cooled refrigeration eliminates heat output and fan airflow. The CORIO™ CP circulator incorporates easy change-over for control of fluid circulation internally or externally and an adjustable pump from 8-27 L/min; 1.5-10.2 psi. The CORIO CP includes USB-B and RS232 ports for PC communication and a USB-A port for datalogging. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 1kW cooling power at 20°C with 110W at -40°C. Options for heating power (1kW or 2kW). 1000FW: cooling water connections G 3/4″ male; contains R449A synthetic refrigerant. Class III (FL) according to DIN 12876-1. Click Here to View Product Video INCLUDED: The Julabo CORIO CP-1000FW Refrigerated Circulator, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - G 3/4" Female to 1/2" Hose Barbs for Water Cooling Circuit - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty