Electronic stirrer, RW 11 basic Lab Egg IKA

MSL Digital laboratory magnetic stirrer: for large volumes and low viscosity in the Life Science and (more) Pharmaceutical fields. - Preparations in buffer solution - Buffer preparation and WFI (Water for Injection) - Vaccine production - Cell cultures and tissue cultures Powerful and simple - The brushless motor guarantees continuous operations for high volumes - The LCD display allows you to set the speed precisely - Shakes volumes up to 8 liters (H2O) - Agitation speed from 40 to 1500 rpm - The lightweight design makes the MSL 8 Digital easy to move, saving valuable lab bench space - SpeedServoTM technology guarantees constant speed even when the viscosity changes - Equipped with timer to program your activities (1 to 99 min) In full safety - The control panel is splash protected for maximum durability - The stainless steel top guarantees unparalleled resistance - The lock function eliminates the risk of unwanted setting changes - Designed to last over time - Soft start to keep splashes to a minimum - Reverse timed rotation for effective mixing without increasing speed (5s to 99min55s) - MSL allows you to stop mixing for a certain period with the intermittent timer function. TECHNICAL FEATURES IN BRIEF Stirring system: Brushless motor. Structure: metal with epoxy paint; stainless steel top. Speed ​​range: 10rpm. Feedback: SpeedServo technology Reversal of stirring direction: Yes, from 5s to 99min55s. Continuous operations: Yes. Lock function: Yes. Intermittent mode: Yes. Display auto-off: Yes, after 10 sec.

This listing is for 1 of 2 Velp Scientific HSC Heating Magnetic Stirrer. The unit is in full workin (more)g condition and is ready for immidate realese. The Velp Scientific HSC Heating Magnetic Stirrer is an analogue heating magnetic stirrer designed for basic heating and stirring applications in chemistry, biology, and pharmaceutical laboratories. It features a rugged design with a ceramic heating plate that resists acids, bases, and solvents, and a techno-polymer casing that resists chemicals, scratches, and surface abrasions. Key Specifications Maximum temperature: 400°C Stirring volume: up to 15 liters Stirring speed: up to 1300 RPM Heating control: Analog Ceramic hot plate: Square-shaped and resistant to chemicals and scratches Power supply: 115V/60Hz Dimensions: 8x3.7x13.5 inches

Scilogex MS-H-S10 Analog Magnetic Hotplate Stirrer 10-ChannelThe Scilogex MS-H-S10 Analog Magnetic H (more)otplate Stirrer 10-Channel features a powerful rotary drive allowing consistent sample conditions across each of the positions. All 10 positions can be controlled simultaneously and the stirrer surface is stainless steel with silicone anti-slip mat. The MS-H-S10 also features a high magnetic adhesion as well as electronic speed control for constant speed even during changes in load. Click Here to View Product Video INCLUDED: The Scilogex MS-H-S10 Analog Magnetic Hotplate Stirrer 10-Channel includes: - Stirrer Bar x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Ministar 80 Digital Overhead Stirrer Stirring Quantity Max 50 Liters Speed Range 0/50 - 500 rp (more)m Viscosity Max. 60000 mPas Features - The IKA Ministar 80 Digital Overhead Stirrer boasts a compact design, ensuring space efficiency without compromising performance. - With constant torque across its rpm range, the IKA MICROSTAR and MINISTAR series offer reliable stirring for various lab needs. - Operating the stirrers is a breeze, thanks to a stable rotary knob and a clear display showing the rotational speed. - Rapid and simple software updates are facilitated through the USB interface, ensuring the devices stay up-to-date effortlessly. - The IKA MICROSTAR and MINISTAR stirrers prioritize essential features, making them dependable companions in the lab. - Available in six versions with rpm up to 2,000 and torque up to 80 Ncm, these stirrers excel in both performance and compactness. The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee. See for yourself:Compact design - The reduced design and the focus on the most essential aspects make the new IKA MICROSTAR and MINISTAR stirrers reliable laboratory companions. Constant torque - All models of the IKA MICROSTAR and MINISTAR series guarantee a constant torque over the entire rpm range. The new devices are available in six different versions with rpms of up to 2,000 rpm and a torque of up to 80 Ncm. Ease of operation - Operation takes place using a stable rotary knob. The display clearly shows the rotational speed. Rapid updates - Regular software updates can be undertaken rapidly and simply via the USB interface. Click Here to View Product Video INCLUDED: The IKA Ministar 80 Digital Overhead Stirrer includes: - MINISTAR 80 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Ministar 80 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)50 lMotor rating input60 WMotor rating output46 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 500 rpmViscosity max.60000 mPasOutput max. at stirring shaft42 WPermissible ON time100 %Torque max. at stirring shaft80 NcmSpeed controlTurning knob Setting accuracy speed1 ±rpm Deviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.8 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)70 x 193 x 147 mmWeight1.72 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input69 WPower input standby0.5 WDC Voltage24 VCurrent consumption2900 mAComparison of ModelsSpecificationsMinistar 20 ControlMinistar 20 DigitalMinistar 40 ControlMinistar 40 DigitalMinistar 80 ControlMinistar 80 DigitalStirring Quantity Max. (H2O)15 l15 l25 l25 l50 l50 lMotor Rating Input60 W60 W60 W60 W60 W60 WSpeed DisplayLCDLEDLCDLEDLCDLEDSpeed Range0/50 - 2000 rpm0/50 - 2000 rpm0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpmViscosity Max.10000 mPas10000 mPas30000 mPas30000 mPas60000 mPas60000 mPasTimer DisplayLCDNoneLCDNoneLCDNoneTemperature DisplayYesNoYesNoYesNoDimensions (W x H x D)70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mmUSB InterfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(7) { background-color: #fffacd; } Request a Formal Quote

Heidolph 036300420 Overhead Stirrer Impeller, PR 32 Ringed Propeller Due to its blade dimensions, th (more)e ringed pitched-blade impeller PR 32 is ideal for solutions, emulsions and suspensions in vessels with the following characteristics: ideal vessel diameter: 113-225 mm, ideal ground clearance: 23-45 mm, ideal filling level: 113-225 mm, ideal volume: 1,100-8,900 ml. The ringed pitched-blade impeller PR 32 has a total length of 400 mm and is made of stainless steel. Its stirrer shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300420 Overhead Stirrer Impeller, PR 32 Ringed Propeller includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph 036300410 Overhead Stirrer Impeller, PR 31 Ringed Propeller Due to its blade dimensions, th (more)e ringed pitched-blade impeller PR 31 is ideal for solutions, emulsions and suspensions in vessels with the following characteristics: ideal vessel diameter: 83-165 mm, ideal ground clearance: 17-33 mm, ideal filling level: 83-165 mm, ideal volume: 400-3,500 ml. The ringed pitched-blade impeller PR 31 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300410 Overhead Stirrer Impeller, PR 31 Ringed Propeller includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Ionizer Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

PS.R2 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. Communication interfaces New PS.R2 balances, like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm balances with a smaller pan have a draft shield. The balance precision and the measurement accuracy is assured by automatic internal adjustment, which takes into consideration temperature changes and time flow. PS.R2 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard. Database - a direct access to databasis Function - a direct access to the basic functions F1 do F4 - programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The Eppendorf CellTram Air 5176 Pneumatic Manual Microinjector utilizes air for pressure transmissio (more)n to guarantees clean and simple handling of a piston pump. Change in volume: 88 µl Adjustable total volume: 2,640 µl Max pressure: 20,000 hPa Dimensions: 175 x 60 mm Weight: 1.4 kg

Dimensions (HxWxD): 760 x 1525 x 790 mm