Clinicon stirrer

The Vortex ZX4 agitator is a modern and advanced vortex with variable speed and two operating modes, (more) sensor or continuous. Thanks to the revolutionary IR sensor mode, an infrared (IR) system detects the presence of the test tube and the instrument is activated automatically: less user operations, more comfort in the working environment Technopolymer structure and ergonomic design guarantee excellent chemical resistance and considerable stability on the laboratory bench, and can be used on many surfaces. Wide range of accessories. IR sensor, VELP patent VELP Scientifica is the only company in the world to supply the technological and revolutionary IR system: as soon as the test tube is detected by the sensor, the latter automatically activates the instrument, without the need for any pressure from the laboratory technician. Compared to the classic pressure mode, the patented IR sensor system guarantees a drastic reduction of the stresses perceived by the operator, increasing the comfort of the working environment. Flexibility, Numerous Accessories ZX4 is an extremely versatile solution, being able to be combined with a variety of platforms. The easy and safe attachment of the platforms is done with a simple push, and guarantees excellent performance in the mixing of many types of tubes and containers. - Variable speed operation, electronically controlled up to 3000 rpm - Wide choice of accessories for tubes, plates and bottles - Universal voltage / frequency model - The accessories adapt with a simple push - Excellent resistance to chemical agents thanks to the technopolymer casing - Excellent stability with zinc alloy base - Large, non-slip rubber feet to stay in the desired position - IP 42 protection against particles and liquids - Designed for maximum durability and backed by a 3-year warranty

Maximum Temperature Homogeneity The aluminum alloy plate ensures a formidable temperature homogeneit (more)y over the entire surface of the plate itself, up to 370°C. Fontal panel The control panel is extremely intuitive. By turning the left knob it is possible to adjust the temperature (up to 370°C), while with the right one you can act on the agitation (up to 1500rpm). Maximum Protection, IP 42 ARE magnetic stirrers guarantee a high level of safety and protection for the user, thanks also to the raised control panel and the special channel for conveying liquids (in case of spills). The control panel is easily accessible, away from heat sources that are dangerous for the operator and protected from any liquid leaks by means of a special conveyor channel. The particular geometry prevents accidental overflows of liquid being processed from entering the internal parts of the instrument. Low Profile, Attractive Design ARE offers an innovative low profile and a highly attractive design for greater comfort for the user. Even the inclination of the front panel has been carefully studied to facilitate its use. AluBlocks™, Greater Versatility AluBlocks™ allow you to perform different heating and stirring experiments with unprecedented flexibility, acting on different types and sizes of tubes. Being modular, they are ideal for creating a workstation that is always customized, capable of supporting tubes of different formats. Made entirely of aluminum, they can be easily placed on the round head heating stirrers for excellent heat transmission and temperature homogeneity. A huge leap forward in productivity, while also saving time, money and counter space. Technical features: Structure: aluminum alloy with epoxy paint Heating plate: aluminum alloy with special protection Diameter of the heating plate: 135 mm Degree of protection CEI EN 60529: IP 42 Power: 630W Weight: 2.6 Kg Dimensions (LxHxP): 165x115x280 mm PERFORMANCE Electronic speed regulation: up to 1500 rpm Temperature regulation: from room temperature to 370°C Stirring capacity (H2O): up to 15 liters Stirring system: high force driving magnet suitable also for continuous work Feedback: constant speed

15 stirring positions, 100% maintenance-free and wear-free by inductive 2mag-Magnetic-Drive concept  (more)for powerful mixing of solutions, power reserves up to 3,000 ml per stirring point, 100% synchronized speeds, jerk-free stirring even at low speeds. Fully encapsulated and hermetically sealed stainless steel housing, IP68, water-, dust-, and germproof, extremely robust construction and performance, easy to clean and maximum resistance, submersible in water- resp. oil baths, suitable for the use in CO2-incubators and ovens. Stirring points: 15 Stirring point distance: 65 mm Stirring volume/stirring point: 1 – 3000 ml Speed range: 100 – 1,600 rpm Stirring power (max.): 40 W Material housing: Stainless steel Permitted operation conditions HT-version:  up to +200°C in air, up to +95°C in water submerged Dimensions (WxDxH): 245 x 375 x 38 mm Weight: 9.5 kg

The unit is build as a cell holder and stirrer for Franz diffusion cells, and in the same time as te (more)mperature conditioned water supply for the Franz cellsin order to keep temperature of the permeation experiments during the run. The temperature conditioned water is coming from an external heater-circulator with thermostat (not included). Cell orifice diameter: 15 mm (+0.5 mm, typically within +0.3 mm) Cell volume: 7 mL (+0.5 mL of stated, typically within + 0.3 mL) Stirring: 500 rpm Dimensions (WxDxH): 457 x 203 x 184 mm Weight: 8.96 kg

4 block dry heaters Designed for daily use in the laboratory, dry block heaters are ideal for applic (more)ations that require particular temperature stability. All units house four easily interchangeable modular blocks, with 40 options to choose from. Close contact between tube and block ensures maximum heat retention for efficient heating. Analog models: economic alternative; low temperature range: +5°C above ambient temperature to 100°C; high temperature range: 75°C to 150°C; control via two temperature adjustment knobs. Digital models: for repeatable results; from 5°C above ambient temperature to 120°C; control via touch pad controls with independent and easy to read LED displays for temperature and time display; sound alarm. - Exceptional temperature uniformity and extraordinary thermal stability. - Unique single point calibration function to ensure accurate display of actual temperature (digital models) Applications Culture incubation and activation, enzymatic reactions, immunological analyzes, melting / boiling points, isothermal incubation, nucleic acid denaturation Display LED display in digital models and knob with double adjustment and markings in analog models Operation Detachable three-wire cable and plug (included). Analog models require an external thermometer or temperature adjustment tool for the setpoint Structure Painted steel armor and support bar attachment with fixing knob Construction features Keypad control and audible alarm (digital models)

An economic laboratory oven but complete with the necessary adjustments and safety devices. Fine tem (more)perature regulation, clear and complete display, top safety class, front regulation of the rear air inlet. Forced ventilation for a better temperature distribution and faster reaching of the set point. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel STANDARD:     PID thermoregulator with adjustable temperature up to 300°C     2 shelves     Rear 45 mm outlet with front device for adjusting opening/closing gap.     Safety class DIN 3.1 Microprocessor controlled Safety class DIN 3.1 (top DIN class) Laboratory Oven STE-F FALC

Dimensions (H x W x D): 655 x 1250 x 500 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

pH meter SevenExcellence S400-uMix-Kit METTLER TOLEDO New equipment in its original packaging Comes  (more)with pH/Ions unit, electrode holder, LabX software, InLab Expert Pro-ISM electrode, uMix magnetic stirrer and 2 sets of pH buffer sachets (buffer solution dates expired: 2023) Reference: V4.3.0 PC connection: RS232, USB and local network External dimensions: 235 x 75 x 188 mm (L x H x D) Temperature compensation: Automatic and manual Temperature range: -30...130°C mV range: -2000.0...2000.0 pH range: -2.00...20.00 Memory: 20,000 recordings, 250 analyzes Accuracy (mV): ± 0.1 mV pH accuracy: ± 0.002