Caframo BDC1850-220 Overhead Stirrer

Yamato LT-400BA Complete Overhead Stirrer with Stand & 60mm 4-Blade Propeller, 115V Speed Range  (more) 115~600rpm Max Torque 0.5N•m (5.0kgf•cm) Motor DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with well-blanced speed and torque for medium viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. Set includes stand, rod, stainless steel shaft and 60mm 4-blade propeller. Speed range 15~600 rpm. INCLUDED: The Yamato LT-400BA Complete Overhead Stirrer with Stand & 60mm 4-Blade Propeller, 115V includes: - Stand and Rod - Clamp, Safety Cover, Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA RW 47 Digital Mechanical Overhead Stirrer Speed Range 69 to 1,560 RPM Viscosity Max. 100,000 mPa (more)s Stirring Quantity Max. 200 l Features - Digital speed display - Infinitely adjustable speed (57 - 1300 rpm) in two speed ranges - Overload protection - Error code display - Robust, ergonomic design - Quiet operation - With constant power-drive Extremely powerful, mechanically controlled laboratorystirrer designed for highly viscous applications for quantities up to 200 l(H2O). It is suitable for intensive mixing for use in laboratories and pilotplants. The stirrer comes equipped with a protection for overheating of themotor by means of self-locking temperature limiter. Additionally, to securebowls, a stirring shaft protection and clamping fixture are optionallyavailable.

IKA RW 20 Digital Mechanical Overhead Stirrer Speed Range 60 to 2,000 RPM Viscosity Max. 10,000 mPas (more) Stirring Quantity Max. 20 l Features - With digital display - Robust, slimline, ergonomic design - Technical improvements on the trusted RW 20 series designs - With constant power-drive - Two speed ranges for universal use from 60 - 2.000 rpm - Push-through agitator shafts (only when stationary) - For stirring quantities of up to 20 l (H2O) The RW 20 Digital Stirrer is designed with a robust, slimline, ergonomic design and features a digital display. It incorporates technical improvements on the trusted RW 20 series designs and offers a constant power-drive. The stirrer has two speed ranges for universal use, from 60 - 2000 rpm, and push-through agitator shafts (only when stationary). It is capable of stirring quantities up to 20 liters (H2O) with a maximum motor rating input of 85 W and output of 35 W. The device includes an LED speed display and stepless speed control, with a maximum viscosity of 10000 mPas and a nominal torque of 1.5 Nm. The stirring element is fastened by a chuck, and the device features a mechanical speed control with an accuracy of ±1 rpm. The RW 20 Digital Stirrer has dimensions of 88 x 294 x 212 mm and weighs 3.1 kg.

Heidolph Overhead Stirrer Visco Jet Impeller inoJET-80mm Particularly in the case of applications wi (more)th very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers! The particular shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. You can find out more about this here. The VISCO JET® 80 is ideal for vessels with the following characteristics: - ideal vessel diameter: 133- 200 mm - ideal ground clearance: 24 mm - ideal filling level: 133- 200 mm - ideal volume: 1,900 - 6,300 ml The VISCO JET® 80 is made of stainless steel. A stirrer shaft with a diameter of 10 mm is included in the scope of delivery. INCLUDED: The Heidolph Overhead Stirrer Visco Jet Impeller inoJET-80mm includes: - Operator's Guide - Full 3 Year Manufacturer's Warranty

Heidolph Hei-TORQUE Expert 200 Overhead StirrerWith Hei-TORQUE Value 200 you can optimally stir visc (more)osities up to 100,000 mPas or volumes up to 50 liters (H2O). Thanks to a wide speed range from 10 to 2,000 rpm and a maximum torque of 200 Ncm, it works particularly powerful.The laboratory stirrer Hei-TORQUE Expert 200 performs every stirring task with minimal noise thanks to the latest engine technology. This laboratory stirrer is also very user-friendly in terms of operation and safety. The 2.4 inch display makes it very easy to set the application parameters and control the process (e.g. using the torque trend display). The safety-related start/stop touch-function serves to minimize the risk of unintentional switching on.Suitable for use in fume hoods or as a drive for reactor superstructures, the Hei-TORQUE Expert 200 has a quick-action chuck (quick chuck with safety ring) with a diameter of 10.5 mm, which can be combined with a large number of stirring tools for the best stirring results. *Stand, clamp, and impeller are sold separately* Click Here to View Product Video INCLUDED: The Heidolph Hei-TORQUE Expert 200 Overhead Stirrer includes: - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Heidolph 036300506 Overhead Stirrer Visco Jet Crack Impeller, 120mm (Stainless Steel) Particularly i (more)n the case of applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers. The shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. The VISCO JET® Crack 120 is ideal for vessels with the following characteristics: ideal vessel diameter: 200-300 mm, ideal ground clearance: 36 mm, ideal filling level: 200-300 mm, and ideal volume: 6,300-21,200 ml. The VISCO JET® Crack 120 is made of stainless steel. A stirrer shaft with a diameter of 10 mm is included in the scope of delivery. INCLUDED: The Heidolph 036300506 Overhead Stirrer Visco Jet Crack Impeller, 120mm (Stainless Steel) includes: - 10mm Stirrer Shaft - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Grant JB Aqua 18 Plus Water Bath Lab This item was removed from a university where it was surplus to (more) requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition, however the handle has snapped off, this does not affect its functionality.

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database

Polyscience P60N2A101B IP-60 Immersion Probe Cooler, 1.5 Rigid Coil Probe, -60 to -20C, 120V, 60Hz3D (more) Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P60N2A101B IP-60 Immersion Probe Cooler, -60°C to -20°C, 150W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW