Heidolph 036300370 Overhead Stirrer Impeller, BR 14 Collapsible-Blade

Safety and resistance for your laboratory OHS advance is designed to guarantee the highest safety st (more)andards. - The durable watertight housing and IP 54 protection rating ensure durability even in the most aggressive environments. - Built-in safety alarms for overload, over temperature and over current will maintain performance over time by stopping agitation - The safe operation of the start and stop knob and the lock key prevent unintentional starts and changes in working conditions. - The built-in vibration sensor with different sensitivity levels will stop the operation and inform you to make sure your OHS is stable and properly fixed. Continuous operation guaranteed and supported by a 3 year extended warranty. First-class performance OHS 100 Advance is the ideal solution for demanding applications operating with viscosities up to 70,000 mPa. The electronically controlled brushless motor of the OHS 100 Advance agitates up to 100 l (H2O) with a maximum torque of 100 Ncm and guarantees maximum durability. SpeedServoTM torque compensation technology maintains constant speed by automatically adapting to changes in viscosity. Set the OHS 100 Advance electronic speed control from 30 to 1300 rpm. Constant Torque at Any Speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional rod stirrer and VELP OHS Series rod stirrers. The torque remains constant at any speed, even at maximum. Having a constant torque is a very important parameter for the reproducibility of the analyzes. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod fall into the liquid? SmartChuck ™ technology makes this activity quick and easy with the use of one hand and without special accessories. Two simple movements allow you to unlock the protection ring and remove or replace the stirring rod. In the event that the protection ring is opened during the analysis, the instrument stops shaking, showing a safety message on the display. Intuitive and precise control panel The intuitive 3.5” OHS Advance TFT display will guide you to precisely set your working conditions and achieve reproducible results. Show key information at a glance. Real-time information on viscosity variation with a resolution of 1 Ncm. Interact with OHS Advance from the real-time graph showing speed, torque and temperature of your test. The OHS Advance works without surveillance thanks to the timer that can be set from 1min to 99.59h. Ideal operating methods can be defined and programmed for demanding tasks where ramps and interval operations are required. Temperature under control OHS Advance is supplied with a Pt100 temperature probe included in the package. Constantly monitor the temperature of your reaction and set the meter to slow down or stop activity if the temperature reaches a defined value. This is important when you want to prevent exothermic reactions from interfering with your analysis! THE BENEFITS OF OHS ADVANCE CONNECTIVITY The OHS Advance is the only rod stirrer to offer the ability to control and monitor processes via Wi-Fi connection to VELP Ermes and via USB. The VELP Ermes cloud platform allows you to control the OHS Advance from PC, smartphone and tablet through a simple and intuitive web interface. With this platform designed by VELP it is possible to activate the shaking, set a timer, set a method (among those saved on the device), download and share reports with a click. For applications in the pharmaceutical, biotechnology and life science sectors, VELP Ermes can manage OHS Advance localized in clean rooms or other controlled environments, without the need for lengthy safety procedures. With the OHS / CotrollerSoftTM software, VELP offers the possibility to all laboratories that cannot benefit from cloud services, a valid alternative with USB connectivity. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS ADVANCE MODELS A - LCD display B - Display keys C - Stirring speed kond D - Lock key E - Main switch F - Smart Chuck

IKA RW 20 Digital Mechanical Overhead Stirrer Package Speed Range 60 to 2,000 RPM Viscosity Max. 10, (more)000 mPas Stirring Quantity Max. 20 l Features - With digital display - Robust, slimline, ergonomic design - Technical improvements on the trusted RW 20 series designs - With constant power-drive - Two speed ranges for universal use from 60 - 2.000 rpm - Push-through agitator shafts (only when stationary) - For stirring quantities of up to 20 l (H2O) The IKA RW 20 digital Package features a digital display and a robust, slimline, ergonomic design. This model incorporates technical improvements on the trusted RW 20 series designs, ensuring enhanced performance. It is equipped with a constant power-drive and offers two speed ranges for universal use, from 60 to 2000 rpm. The push-through agitator shafts are operable only when stationary, making it suitable for stirring quantities of up to 20 liters (H2O). The device includes an LED speed display and a stepless speed adjustment for precise control.

IKA Microstar 30 Digital Overhead Stirrer Stirring quantity max. (H2O) 20 L Speed Range 0/50 - 500 (more) rpm Viscosity max. 20000 mPas Features - Compact design saves space in the laboratory - Constant torque throughout the entire rpm range - Easy operation with a stable rotary knob and clear LED display - Rapid software updates via USB interface - Durable brushless DC motor ensures reliable performance The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee. See for yourself: INCLUDED: The IKA Microstar 30 Digital Overhead Stirrer includes: - MICROSTAR 30 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Microstar 30 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)20 lMotor rating input32 WMotor rating output22 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 500 rpmViscosity max.20000 mPasOutput max. at stirring shaft15.7 WPermissible ON time100 %Torque max. at stirring shaft30 Ncm Speed controlTurning knob Setting accuracy speed1 ±rpm Deviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.3 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)60 x 173 x 126 mmWeight1.26 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input32 WPower input standby0.3 WDC Voltage24 VCurrent consumption1300 mAComparison of ModelsSpecificationsIKA Microstar 15 Control Overhead StirrerIKA Microstar 15 Digital Overhead StirrerIKA Microstar 30 Control Overhead StirrerIKA Microstar 30 Digital Overhead StirrerIKA Microstar 7.5 Control Overhead StirrerIKA Microstar 7.5 Digital Overhead StirrerStirring quantity max. (H2O)10 l10 l20 l20 l5 l5 lMotor rating input32 W32 W32 W32 W32 W32 WSpeed displayLCDLEDLCDLEDLCDLEDSpeed range0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpm0/30 - 2000 rpm0/50 - 2000 rpmViscosity max.8000 mPas8000 mPas20000 mPas20000 mPas4000 mPas4000 mPasTorque max. at stirring shaft15 Ncm15 Ncm30 Ncm30 Ncm7.5 Ncm7.5 NcmTime setting range0 - 6000 minN/A0 - 6000 minN/A0 - 6000 minN/ATemperature displayYesN/AYesN/AYesN/AUSB interfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Heidolph Hei-TORQUE Ultimate 400 w/ USB & RS232 InterfaceThe Hei-TORQUE Ultimate 400 laboratory  (more)stirrer is ideal for the powerful stirring of viscosities up to 250,000 mPas or volumes up to 100 liters (H2O). Thanks to its 2-gear stage design, it stirs particularly powerfully in the speed range up to 400 rpm and is therefore particularly suitable for applications with highly viscous media that require mixing in the lower speed range. However, operation at speeds of up to 2,000 rpm is also possible in the second speed. In addition, the Hei-TORQUE Ultimate 400 offers, above all, the possibility of ramp programming, process monitoring (including timer function, torque trend display as a value), as well as the necessary equipment for documenting your application parameters. For this it is equipped with two interfaces - USB and RS232 - which give you the greatest flexibility to connect the device to a PC, a programmable logic controller (PLC) or an automation system such as e.g. LabManager. The scope of delivery includes the free Hei-Control software for remote control of up to 4 devices via PC. The laboratory stirrer Hei-TORQUE Value 400 performs every stirring task with minimal noise thanks to the latest engine technology. The safety-related start/stop touch-function serves to minimize the risk of unintentional switching on. Suitable for use in fume hoods or as a drive for reactor superstructures, the Hei-TORQUE Ultimate 400 has a quick-action chuck (quick chuck with safety ring) with a diameter of 10.5 mm, which can be combined with a large number of stirring tools for the best stirring results. *Stand, clamp, and impeller are sold separately* Click Here to View Product Video INCLUDED: The Heidolph Hei-TORQUE Ultimate 400 w/ USB & RS232 Interface includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Heidolph 036300510 Overhead Stirrer Visco Jet Impeller inoJET, 120mm (POM) Particularly in the case  (more)of applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers. The shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. The VISCO JET® 120 is ideal for vessels with the following characteristics: ideal vessel diameter: 200-300 mm, ideal ground clearance: 36 mm, ideal filling level: 200-300 mm, and ideal volume: 6,300 -21,200 ml. This VISCO JET® 120 is made of POM plastic and can be used up to max. 90°C. A polyamide coated stirrer shaft with a diameter of approximately 10 mm is included in the scope of delivery. INCLUDED: The Heidolph 036300505 Overhead Stirrer Visco Jet Crack Impeller, 80mm (Stainless Steel) includes: - 10mm Stirrer Shaft - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph 036300400 Overhead Stirrer Impeller, PR 30 Pitched-Blade Due to its blade dimensions, the p (more)itched-blade impeller PR 30 is ideal for solutions, emulsions and suspensions in vessels with the following characteristics: ideal vessel diameter: 145-290 mm, ideal ground clearance: 29-58 mm, ideal filling level: 145-290 mm, and ideal volume: 2,400-19,200 ml. The pitched-blade impeller PR 30 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300400 Overhead Stirrer Impeller, PR 30 Pitched-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heating thermostat Alpha: from 25 to 100°C LAUDA Alpha is the most affordable choice when it comes t (more)o high quality LAUDA thermostats. These reliable and easy-to-use thermostats, with features reduced to the essentials, can be operated with non-flammable liquids and are suitable for both indoor and outdoor temperature control tasks. The cooling system, the pump circulation set and the bath cover set are available as accessories for all thermostats. With the water cooling system, the thermostat can be used for operations from 20° to 100°C. Low-level and overtemperature protection for operation with non-flammable liquids. Qualitative characteristics - Simple and intuitive menu navigation with three-button operation via a large, clearly legible LED display - Integrated timer function to allow automatic shutdown of the device - Under / over temperature protection for operation with non-flammable liquids The back of the Alpha thermostat: clamp, power supply and reset button. Simple control with three buttons and three indicator lights: active heating, active cooling and alarm light. Can be used with any bath vessel up to 30 mm thick with the included screw clamp. Graph of pump characteristics in Alpha Lauda models. Graph of heating curves of Aplha Lauda models. TECHNICAL VISUALIZATION a - Control head with clamp b - Bath vessel c - Four mounting feet 1 - Temperature controller with four segment LED display 2 - Heater active (yellow LED is lit) Cooler active (blue LED is lit) Error signal (red LED is flashing) 3 - Menu functions, select and Enter keys 4 - Mains switch 5 - Screw clamp 6 - Tubular heater 7 - Temperature probe Pt100 8 - Pump outflow with pump outflow reducer 1 - Reset button (press only if the display shows SAFE ) 2 - Cooler cable 3 - Rating label 4 - Mains cable 5 - Screw clamp

Front aperture (work mode)(HxL): 165 x 1800 mm Front aperture maximum height: 350 mm Dimensions (wit (more)hout support frame and filter unit)(LxDxH): 1943 x 844 x 1552 mm Height with support frame: 2297 mm Interior dimensons (LxDxH): 1800 x 605 x 725 mm Work area(LxD): 1719 x 440 mm Weight (without support frame and filter unit): 315 kg

Canon XF305 HD Video Camera with Charger w/ Power Adapter This Video Camera was removed from a unive (more)rsity lab where it was surplus to requirements. The item is in reasonably good cosmetic condition and is in full working order. Accessories included: Carry Bag Power leadLens capTransfer lead

This was removed from a university lab where it was surplus to requirements. The system is in reason (more)able cosmetic condition. There are stains and other marks along the edges and surface. The atmospheric temperature & humidity probe is dented. The item is untested as it wasn't supplied with a PSU. Also included are the following:1x Delta-T Devices atmospheric temperature & humidity probeS/N: RHAI-077 1x Delta-T PC software type LS2Version 1.04 1x Desiccant Pack1x DE-9 cable1x Tutorial Kit1x Spares & Accessory Pack3x Component part (EMC directive) 5m 5x Temperature Probes User Manual1x Quantum Sensor User Manual1x Delta-T Devices Data Loggers, Sensors & Systems1x Delta-T Devices Plant Science & Solar Radiation Studies1x Delta-T Devices Image Analysis Systems1x Delta-T Logger User Manual Version 2.01

VACUUBRAND VACUU-Select, VSP 3000, and KF DN 25 Package for Fine Vacuum Control Upper measuring limi (more)t 750 torr Lower measuring limit 1 x 10-3 torr Accuracy +/- 15% of indicated value in the range 0.01-5 mbar/hPa/torr Features - Complete package for vacuum control of all fine vacuum applications in chemical labs, with continuous control range from 5 mbar to fine vacuum (10-3 mbar) - Graphic user interface for simple operation - Predefined applications for quick, reproducible results - Application editor allows easy customization - Proprietary Pirani-type fine vacuum gauge offers superior chemical resistance and mechanical robustness The VACUU·SELECT fine vacuum control packages provide an easy-to-use vacuum control option for work down to 10-3 mbar. These packages include the VACUU·SELECT controller with fine vacuum gauge, a chemical-resistant inline isolation valve (VV-B 15C), and the accessories required for connection to your vacuum system via small flange (KF) connections. VACUUBRAND offers fine vacuum control packages with two different small flange connections. The KF DN 16 fine vacuum control package is compatible with our rotary vane pump models RE / RZ 2.5 to RE / RZ 6 and our HYBRID pump RC 6. The KF DN 25 fine vacuum control package is configured for use with our RE / RZ 9 rotary vane pumps and VACUU·PURE screw pumps. With its intuitive, application-based user interface, the controller allows you to quickly get your fine vacuum process under control. For advanced processes, pre-defined applications can be modified, and new applications can be created to optimize your process conditions. The included inline solenoid valve and sensor are automatically configured via the proprietary VACUU·BUS system.INCLUDED: The VACUUBRAND VACUU-Select, VSP 3000, and KF DN 25 Package for Fine Vacuum Control includes: - Vacuum controller VACUU·SELECT (without internal vacuum sensor and venting valve) with VSP 3000 and power supply - Solenoid valve VV-B 15C KF DN 25 - T-piece KF DN 25 - Hose nozzle DN 15 mm (PP) - Clamping and sealing rings - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty