Benchmark IPS7000-5 MHS-5 5-Position Hotplate Stirrer

Heidolph MR-Hei Standard hot plate stirrer. Maximum temperature of the plate 300 °C (250 °C of the s (more)ample), accuracy ± 1 °C, heating power of 820W. Speed up to 1400 rpm. Maximum capacity 20L. Ceramic coated 145 mm Ø plate. Heidolph MR Hei-Standard hot plate stirrers are suitable for all standard applications. They have protection against overheating that turns off the equipment if the set temperature is exceeded by 25 °C. Rotation uniformity even at very low revolutions. Suitable for continuous operation. Chemically resistant.

IKA R 2302 Propeller 4 - Bladed Stirrer Standard stirring element. For drawing the material to be m (more)ixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.Stirrer Ø: 150 mmShaft Ø: 13 mmShaft length: 800 mm INCLUDED: The IKA R 1381 Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA Eurostar 20 High Speed Control Overhead Stirrer Stirring quantity max. per stirring position ( (more)H2O) 20 l Deviation of speed measurement n 300rpm 1 ±% Temperature Measuring Range -10 - +350 °C Features - Multilingual TFT display - Programmable functions - Integrated temperature measurement - Interval operation - Timer function - Adjustable safety circuit - Locked function - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display - H 67.60 temperature sensor and WH 11 WiCo holder included in delivery High speed laboratory stirrer designed with a removable wireless controller and a digital TFT display. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/150 - 6000 rpm. The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters, and an update of the current firmware. An integrated torque trend display is provided for the measurement of viscosity changes. The included precision stirrer shaft is 280 mm long and has a maximum immersion depth of 220 mm. INCLUDED: The IKA Eurostar 20 High Speed Control Overhead Stirrer includes: - EUROSTAR 20 high speed control - R 6000 precision shaft - Open-end wrench - Hook spanner - H 67.60 Temperature sensor, stainless steel - WH11 - OS 1.0 WiCo power supply unit - USB Cable - USB A to Micro-B, 2 m - USB cable micro A – micro B 2.0 - Screw driver - Protective cover for WiCo contact - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 20 High Speed Control Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)20 lMotor rating input176 WMotor rating output125 WMotor principleBrushless DCSpeed displayTFTSpeed range0/150 - 6000 rpmIntermittent operationyes Viscosity max.10000 mPas Output max. at stirring shaft125 W Permissible ON time100 %Torque max. at stirring shaft20 NcmSpeed controlsteplessSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningspecial output shaftConnection for ext. temperature sensorPT1000Temperature displayyesFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmTorque displayyesNominal torque0.2 NmTorque measurementtrendDeviation of torque measurement I6 ±NcmTimeryesTimer displayTFTTime setting range1 - 6000 minTemperature measuring range-10 - +350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)86 x 325 x 230 mmWeight5.242 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 40RS 232 interfaceyesUSB interfaceyesVoltage230 / 115 / 100 VFrequency50/60 HzPower input176 WComparison of IKA Eurostar Control Overhead StirrersSpecsEurostar 20Eurostar 60Eurostar 100Eurostar 200Eurostar 400Stirring quantity max. per stirring position (H2O)20 l40 l100 l100 l150 lSpeed range0/150 - 6000 rpm0/30 - 2000 rpm0/30 - 1300 rpm0/6 - 2000 rpm0/6 - 2000 rpmViscosity max.10000 mPas50000 mPas70000 mPas100000 mPas100000 mPasTorque max. at stirring shaft20 Ncm60 Ncm100 Ncm200 Ncm400 NcmPower input176 W176 W186 W130 W226 WSetting accuracy speed1 ±rpm1 ±rpm1 ±rpm1 ±rpm1 ±rpm.comparison-table tr td:nth-child(2) { background-color: #fffacd;}

Heidolph 036300510 Overhead Stirrer Visco Jet Impeller inoJET, 120mm (POM) Particularly in the case  (more)of applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers. The shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. The VISCO JET® 120 is ideal for vessels with the following characteristics: ideal vessel diameter: 200-300 mm, ideal ground clearance: 36 mm, ideal filling level: 200-300 mm, and ideal volume: 6,300 -21,200 ml. This VISCO JET® 120 is made of POM plastic and can be used up to max. 90°C. A polyamide coated stirrer shaft with a diameter of approximately 10 mm is included in the scope of delivery. INCLUDED: The Heidolph 036300505 Overhead Stirrer Visco Jet Crack Impeller, 80mm (Stainless Steel) includes: - 10mm Stirrer Shaft - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Ohaus FC5714 Frontier Multi-Pro Centrifuge w/ Selectable Rotor Speed Range 200 to 14,000 RPM Maximum (more) Capacity 4 x 100ml Warranty 2 Year Manufacturer's Features - Automatic rotor identification makes switching between applications extremely easy - Simple one-hand operation enabled by the selection button/rotary knob combination—even with gloves on - Large backlit LCD display shows centrifugation settings and real-time parameters on one interface - Program storage up to 99 runs including parameter settings and rotor types - Maintenance-free induction drive - Thread-free rotor locking mechanism - Optimized airflow system to keep samples cool (non-refrigerated models) - Chemical and corrosion-resistant stainless-steel housing ensures durability in lab environments - Self-diagnostic program to record usage and error history for easy maintenance and to minimize downtime - Over-speed protection, immediately upon rotor insertion - Active imbalance-detection with individual imbalance tolerances set for each rotor - Motorized lid-locking system to protect operators from accidental injuries - Sealed and bio-containment rotors to safeguard operators from harmful aerosols Click Here to View Product Video The Ohaus Frontier 5000 Series Multi-Pro Centrifuges are designed for universal use in multiple applications in research, industrial, and clinical laboratories and can be combined with a range of rotors and accessories for customized use. These centrifuges are available in 7 models with capacities from 0.2ml to 4 × 750 ml - and feature high speed performance at maximum volume, automatic rotor identification and safety features. These multi-purpose centrifuges offer a high-speed centrifugation platform which can be customized to fit workflow needs using a wide variety of rotors and accessories. The intuitive design of the centrifuges & accessories enables easy access to parameter settings, and quick rotation between applications. The performance of these centrifuges is propelled by German engineering, and high-quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use. The Frontier 5000 Series is equipped with protective features, including automatic overspeed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5714 Frontier Multi-Pro Centrifuge w/ Selectable Rotor includes: - FC5714 Frontier Multi-Pro Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty