Benchmark IPS2050-20 OS20L Overhead Stirrer, 20L includes stand, and 4 arm propeller, 115V

IKA RW 47 Digital Mechanical Overhead Stirrer Speed Range 69 to 1,560 RPM Viscosity Max. 100,000 mPa (more)s Stirring Quantity Max. 200 l Features - Digital speed display - Infinitely adjustable speed (57 - 1300 rpm) in two speed ranges - Overload protection - Error code display - Robust, ergonomic design - Quiet operation - With constant power-drive Extremely powerful, mechanically controlled laboratorystirrer designed for highly viscous applications for quantities up to 200 l(H2O). It is suitable for intensive mixing for use in laboratories and pilotplants. The stirrer comes equipped with a protection for overheating of themotor by means of self-locking temperature limiter. Additionally, to securebowls, a stirring shaft protection and clamping fixture are optionallyavailable.

IKA RW 20 Digital Mechanical Overhead Stirrer Package Speed Range 60 to 2,000 RPM Viscosity Max. 10, (more)000 mPas Stirring Quantity Max. 20 l Features - With digital display - Robust, slimline, ergonomic design - Technical improvements on the trusted RW 20 series designs - With constant power-drive - Two speed ranges for universal use from 60 - 2.000 rpm - Push-through agitator shafts (only when stationary) - For stirring quantities of up to 20 l (H2O) The IKA RW 20 digital Package features a digital display and a robust, slimline, ergonomic design. This model incorporates technical improvements on the trusted RW 20 series designs, ensuring enhanced performance. It is equipped with a constant power-drive and offers two speed ranges for universal use, from 60 to 2000 rpm. The push-through agitator shafts are operable only when stationary, making it suitable for stirring quantities of up to 20 liters (H2O). The device includes an LED speed display and a stepless speed adjustment for precise control.

IKA Eurostar 400 Control Overhead Stirrer Speed Range 0/6 to 2,000 RPM Viscosity Max. 100,000 mPas (more) Stirring Quantity Max. 150 l Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Powerful laboratory stirrer for high viscous applications and intensive mixing for quantities up to 150 l (H2O). It automatically adjusts the speed within the range of 0/6 – 2000 rpm (two speed ranges) through microprocessor-controlled technology. Integrated safety circuits ensure automatic cut-off in anti-stall or overload conditions. Continuous comparison of shaft to desired speed is performed, and variations are adjusted automatically. This ensures constant speed even with changes in viscosities of the sample. The stirrer features a brushless DC motor with a rating input of 220 W and an output of 176 W, offering a maximum torque of 400 Ncm. It includes a digital TFT speed display, stepless speed control, and supports intermittent operation. The unit also has overload protection, push-through agitator shafts, and an error code display, ensuring quiet and reliable operation.

IKA Eurostar 20 Digital Overhead StirrerFeatures - Digital speed display - Infinitely adjustable spe (more)ed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Laboratory stirrer designed for simple stirring tasks for quantities up to 15 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.INCLUDED: The IKA Eurostar 20 Digital Overhead Stirrer includes: - EUROSTAR 20 digital - Chuck key - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 20 Digital Overhead Stirrer SpecificationsStirring quantity max. per stirring position (H2O)15 lMotor rating input70 WMotor rating output42 WMotor principleBrushless DCSpeed displayLEDSpeed range0/30 - 2000 rpmViscosity max.10000 mPasOutput max. at stirring shaft42 WPermissible ON time100 %Torque max. at stirring shaft20 NcmSpeed controlsteplessSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 10 mmHollow shaft, inner diameter11 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmSpeed controlelectronicNominal torque0.2 NmHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)86 x 248 x 208 mmWeight4.4 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 42Voltage230 / 115 / 100 VFrequency50/60 HzPower input70 WComparison of ModelsSpecificationsEurostar 20 DigitalEurostar 20 High Speed DigitalEurostar 40 DigitalEurostar 60 DigitalEurostar 100 DigitalEurostar 200 DigitalEurostar 400 DigitalStirring Quantity Max. per Position (H2O)15 l20 l25 l40 l100 l100 l150 lMotor Rating Input70 W176 W118 W176 W186 W130 W220 WSpeed Range0/30 - 2000 rpm0/150 - 6000 rpm0/30 - 2000 rpm0/30 - 2000 rpm0/30 - 1300 rpm0/6 - 2000 rpm0/6 - 2000 rpmViscosity Max.10000 mPas10000 mPas30000 mPas50000 mPas70000 mPas100000 mPas100000 mPas.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Heidolph 036300350 Overhead Stirrer Impeller, BR 12 Pivoting-Blade Especially when using narrow-neck (more)ed vessels, e.g. round-bottom flasks, a stirring tool with pivoting blades is used. Just like our pivoting-blade impeller BR 12. This blade impeller is ideal for dissolving and homogenizing in vessels with the following characteristics: ideal vessel diameter: 120 mm, ideal ground clearance: 6 mm, ideal filling level: 120 mm, and ideal volume: 1,400 ml. The pivoting-blade impeller BR 12 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300350 Overhead Stirrer Impeller, BR 12 Pivoting-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Range 1: 60 – 500 rpm Range 2: 240 – 2000 rpm

Heating thermostat from 20 to 100°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. . Graph of the heating performance of the Silver and Gold thermostats in the models with transparent polycarbonate tank. Performance graph of the pump pressing on the six levels.

- Diameter of support rod: 12 mm. - Dimensions (W x D): 300 x 430 mm. - Height: 600 mm. - Max. load: (more) 10 kg.

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 105 mm Material: carbon fiber for standards up to 50 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW