AREC 7 Hot Plate Magnetic Stirrer Velp

Powerful stirring for your lab reactions AREC features state-of-the-art heating plate technology, de (more)signed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. You can rely on the AREC for demanding laboratory reactions, stirring volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. SAFETY AND EASE OF USE FOR LAB OPERATORS The AREC stirrer with heating plate guarantees a superior level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents . When the plate temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic plate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. SAVE TIME AND SPACE WITH THE NEW CONTROL PANEL Thanks to the extremely bright and easy-to-read digital display, the temperature can be monitored constantly. Two new comfortable knobs: the one on the left for the temperature (up to 550°C), the one on the right for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the lab hood. It is not possible to connect AREC to the Cloud Ermes system.

AREC 10 Digital was designed for laboratory applications where a comfortable and large work surface  (more)is required, which here reaches 26x26 cm in size, the largest among the Velp series. The plate offers high resistance to acids, bases and solvents, while the technopolymer structure of the stirrer is designed to prevent accidental spills of liquids from reaching the electronic components, ensuring easy and quick cleaning. This translates into product safety and durability even in the most demanding laboratories; further protected by a 3-year warranty (subject to online registration). The heating uses the latest technologies available and ensures a uniform temperature across the entire plate and exceptional transfer efficiency. Same quality for agitation: SpeedServo™ technology and brushless motor offer precise and powerful agitation even when viscosity varies. In short, why we offer you AREC 10 Digital: - Easy to use and highly resistant to chemicals - Precise setting of temperature and agitation - Accepts volumes up to 25 liters / 30 kg - Possibility of precise thermoregulation of the fluid with Pt100/Pt1000 and VTF probes - Designed for durability and guaranteed for 3 years The powerful brushless motor of the AREC 10 Digital ensures stable and reliable stirring. The patented SpeedServo™ technology ensures constant speed even with variations in fluid viscosity. The always precise stirring speed, from chemical reactions to sample preparation, adjustable from 100 to 1500 rpm, it is ideal for any laboratory need. With a stirring capacity of up to 25 liters (H2O) (or 30 kg of liquid), the AREC 10 Digital stands out for its robustness and superior performance. Arec 10 reaches the remarkable temperature of +550°C in complete safety and control. Extremely precise, you can increase the temperature by +1.0°C. By connecting the external PT100 or PT1000 sensors you can directly thermoregulate the sample up to 350°C with an accuracy of ±1.0°C. Using VTF Digital instead you can control the temperature with a precision of ±0.5°C (up to a maximum of 300°C). In this regard, Arec 10 is available with different accessory packages. You will find all the combinations at the bottom. Safety during rescaling: - 'Hot surface' alarm when temperature exceeds 50°C, even when inactive. - Overtemperature alarm above 570°C 1 - Aluminum heating plate with ceramic coating 2 - Main switch 3 - Knob for stirring setting 4 - Knob for temperature setting 5 - Display

Maximum temperature: 300°C Speed: 0 – 1400 rpm Heating plate surface: 135 x 135 mm

15-position digital magnetic hotplate stirrer, designed for synchronous heating and stirring. The ma (more)gnetic coil technology provides noiseless and consistent stirring on all positions. The surface temperature is infinitely adjustable up to 120°C, producing a maximum medium temperature of 70°C (depending on the used vessel). Speed remains constant, even when load changes. Number of stirring positions: 15 Stirring position distance: 90 mm Speed deviation of individual stirring positions: 0 % Stirring quantity max. per stirring position (H2O): 0.4 l Speed adjustment: 10 RPM Steps Speed range: 0 – 1000 rpm Stirring bar length: 25 – 30 mm Heating temperature range: room temp. – 120 °C Heating rate heating plate: 3 K/min Adjustable safety circuit: 50 – 150 °C Set-up plate material: Aluminium alloy Set-up plate dimensions: 270 x 495 mm Dimensions (WxHxD): 280 x 60 x 610 mm Weight: 10.5 kg

Maximum temperature: 350°C Maximum speed: 1250 rpm Plate diameter: 145 mm Dimensions (HxWxD):120 x 1 (more)60 x 210 mm

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

ACL 100 coagulation analyzer developed by Instrumentation Laboratory (IL) is aimed to provide optimu (more)m efficiency for performing coagulation testing at health care centers, physicians’ offices, and small laboratories. The latest advancement of IL, the ACL 100 is an ideal choice for low volume workloads and to serve as a backup analyzer. It is a fully automated clot end point analyzer with a processing throughput of 110 tests per hour for PT and Fibrinogen. With the use of this system, you can yield quantitative clottable Fibrinogen result with every PT automatically, without any need for additional steps or reagents. This system is also effective to perform clotting assays such as Lupus and APCR-V Leiden. It offers the convenience of attaining dependable and reliable results for test such as PT-fibrinogen, APTT, TT, Protein C and Protein S assays, and factor assays. Samples can be analyzed in single, batch, duplicate and single menus, and can produce the results for PT, APTT and fibrinogen on four samples within ten minutes, allowing up to 24 test results as well as another 32 optional calculations. Besides these, there are other benefits such as minimum maintenance requirements, convenience, and keyboard for simple patient identification data entry etc.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW