AM4 Digital PRO magnetic stirrer, complete system

THE TOP MODEL OF THE 5 SERIES Ideal for laboratories requiring precise sample temperature control an (more)d maximum reproducibility. The AREX 5 Digital magnetic stirrer is a beautiful instrument with a dual digital display for thermoregulating samples with an accuracy of ± 1.0 °C. Thanks to the VTF system then, it will be possible to achieve an accuracy of ± 0.5°C. Pt100 and Pt1000 probes are also available as an option. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Digital Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, a safety message ('HOT') remains on the display until the plate temperature drops below 50°C. A further alarm will detect the presence of the probe. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. THERMOREGULATION When a temperature probe is connected, it is possible to choose 2 different thermoregulation modes to satisfy all laboratory needs: - FAST: the set temperature is reached quickly - FINE: the set temperature is reached more slowly, minimizing the overshoot SHAKING AREX 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. The combination of the powerful brushless motor and the strong magnetic coupling ensure homogeneous stirring, even in the peripheral areas of the plate, guaranteeing a constant speed in all positions. DESIGN The compact, innovative and attractive design offers comfort and safety both during benchtop applications and in laboratory fume cupboards. The inclination of the front panel is designed to optimize the user experience and the bright LED display allows easy reading and constant monitoring of the temperature and stirring speed. APPLICATIONS AREX 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX DIGITAL PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 50 to 1500 rpm. 1 - Aluminum alloy plate with ceramic coating 2 - Main switch 3 - Speed control knob 4 - Temperature control knob 5 - Display A - Probe led B - Temperature setpoint led La piastra riscaldante realizzata in alluminio con rivestimento in ceramica, conferisce: • Ottimale distribuzione del calore con una elevata potenza specifica grazie alla configurazione circolare • Ottima omogeneità di temperatura in tutti i punti della piastra • Elevata resistenza a fatica termica e shock termici • Elevata resistenza ad agenti chimici e abrasioni superficiali COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS

MULTISTIRRER 15 Velp multiposition magnetic stirrer MULTISTIRRER 15 is a 6-place magnetic stirrer fo (more)r ø 85 mm beakers. Designed to last, these tools feature a stainless steel top that is resistant to chemical corrosion. It is possible to set a common speed up to 1500 rpm, with the electronics guaranteeing good speed regulation even at low rpm. Even after several days of operation, the instruments do not overheat, which is a highly valued feature in microbiology and biochemistry. It is possible to thermostat the samples by combining MULTISTIRRER with a recirculating water bath. ROBUST AND PRACTICAL - The control panel is protected from liquid spills - Heavy duty steel construction with epoxy coating - Stainless steel cover - Very low height - ergonomic - Lightweight, easy to move - Designed for maximum durability and backed by a 3 year warranty THE ADVANTAGES OF THE VELP MICROSTIRRER - Clear surface for viewing particles and color changes - It doesn't get hot, even after days of continuous use - Can thermostat samples using a recirculating water bath - Ideal for microtitration, microbiology and biochemistry - Soft start but quick achievement of the set speed - High power magneto 'PCM' driven by single phase motor for continuous operation

Maximum Temperature Homogeneity The aluminum alloy plate ensures a formidable temperature homogeneit (more)y over the entire surface of the plate itself, up to 370°C. Fontal panel The control panel is extremely intuitive. By turning the left knob it is possible to adjust the temperature (up to 370°C), while with the right one you can act on the agitation (up to 1500rpm). Maximum Protection, IP 42 ARE magnetic stirrers guarantee a high level of safety and protection for the user, thanks also to the raised control panel and the special channel for conveying liquids (in case of spills). The control panel is easily accessible, away from heat sources that are dangerous for the operator and protected from any liquid leaks by means of a special conveyor channel. The particular geometry prevents accidental overflows of liquid being processed from entering the internal parts of the instrument. Low Profile, Attractive Design ARE offers an innovative low profile and a highly attractive design for greater comfort for the user. Even the inclination of the front panel has been carefully studied to facilitate its use. AluBlocks™, Greater Versatility AluBlocks™ allow you to perform different heating and stirring experiments with unprecedented flexibility, acting on different types and sizes of tubes. Being modular, they are ideal for creating a workstation that is always customized, capable of supporting tubes of different formats. Made entirely of aluminum, they can be easily placed on the round head heating stirrers for excellent heat transmission and temperature homogeneity. A huge leap forward in productivity, while also saving time, money and counter space. Technical features: Structure: aluminum alloy with epoxy paint Heating plate: aluminum alloy with special protection Diameter of the heating plate: 135 mm Degree of protection CEI EN 60529: IP 42 Power: 630W Weight: 2.6 Kg Dimensions (LxHxP): 165x115x280 mm PERFORMANCE Electronic speed regulation: up to 1500 rpm Temperature regulation: from room temperature to 370°C Stirring capacity (H2O): up to 15 liters Stirring system: high force driving magnet suitable also for continuous work Feedback: constant speed

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

Maximum speed: 30000 rpm Maximum RCF: 65395 xg Maximum capacity: 6 x 250 ml Speed range: 200 – 30000 (more) rpm Temperature range: -20°C to 40°C Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments Dimensions (WxHxD): 715 x 420 x 510 mm Weight: 91 kg Equipped with: 1x Hermle 221.21 fixed angle rotor 6x Hermle 12/001 1x 50 ml falcon tube adapter 6x Hermle 13/001 4x 15 ml falcon tube adapter

S+B Display Hanging Cabinet White 400x600x310

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Millipore AFS 15E Water Purification SystemAFS® E systems combine state-of-the (more)-art Elix® electrodeionization (EDI) technology with other complementary water purification techniques to provide reliable and consistent water quality. The AFS® 15E water purification system can produce up to 300 L of water daily with a production flow rate to the reservoir of 15 L/h and a dispensing flow rate to the analyzer of 2 L/min. Water produced by the systems complies with the Clinical and Laboratory Standards Institute (CLSI) guideline for clinical laboratory reagent water (CLRW). Elix® EDI technology, which uses ion exchange resins that are permanently self-regenerated, helps ensure low and predictable running costs for the AFS® E range of systems. These systems have full monitoring and water quality archiving capabilities that allow storage of up to six months of data.