Edmund Bühler KS 15 B control Platform Shaker

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

FURTHER DETAILS TO FOLLOW

Thermo Scientific Cimarec-i Telesystem 15-40 Multipoint Shaker New equipment in its original packagi (more)ng Reference: Cimarec i 50088036 Set comprising a magnetic induction stirrer (without motor) and a remote control box. 15 stirring stations Ideal for use in immersion in water baths up to 50°C Automated start-up for progressive acceleration of the magnetic bar Perfect for use in incubators and climatic chambers Delivered complete with Telemodul control box Telesystem 15.40: With Telemodul 40 C remote control box Speed ​​range: 100 to 2000 rpm Volume: up to 1200 ml per stirring station Dimensions: L x W x H: 240 x 420 x 35 mm Protection: IP 68 Weight: 8kg Ambient conditions: Permissible temperature: -10 to +56°C / RH: 100% Gross weight: 11.677 kg Gross dimensions: 57.5 x 39 x 34.5 cm

GERHARDT LS5 back and forth agitator Brand GERHARDT Model: LS 5 The drive belts are new, changed on  (more)01-10-2024 With: 2 UB 50 fixing bars, longitudinal and 5 US 25 clamping rollers, transverse Platform surface: 380x540 mm Timer 0-999 min Non-slip rubber mat Movement: Linear Amplitude: 50 mm Minimum speed: 20 rpm Maximum speed: 200 rpm Capacity: up to 30 kg Timer: 1 to 999 minutes Power consumption: 230 V, 50 Hz, 80 W, 0.35 A Overall dimensions (WxDxH): 610 x 510 x 120 mm Weight: 28 kg

Ohaus ISLDMPHDGL Incubating Shaker The Ohaus ISLDMPHDGL Incubating Light Duty Shaker with Opaque Lid (more) is designed to incubate samples from 5° ambient to 65° C depending on the model are optimized for shaking microplates, deep-well plates, or micro-tubes. The ISLD04HDG has an 8 lb (3.6 kg) capacity while the Incubating Microplate Shaker can hold up to four standard or deep well plates. Incubating-Cooling Mini Shaker is designed to hold two microplates or two optional modular tube blocks and comes with an opaque lid for light sensitive samples. The ISLDMPHDGL features LED displays with touchpad controls. The variable speed microprocessor control provides consistent, uniform shaking action. The microprocessor will display the last setpoint and will restart if power is interrupted. Triple eccentric drive with permanently lubricated ball bearings and maintenance-free brushless DC motor provides reliable service and continuous duty operation. Units slowly increase speed to desired setpoint to avoid splashing. Digital models feature overload protection. Audible and visual signals activate when the system detects obstruction or tray overload.INCLUDED: The Ohaus ISLDMPHDGL Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISLDMPHDGL Incubating Shaker Specifications Temperature RangeAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°CSpeed Range100 to 1200 rpmSpeed Accuracy± 2%Timer1 second to 160 hoursOrbit3 mm (0.12")Maximum Weight Capacity4 microplates or 2 micro-tube racksTray MaterialAluminumTray Dimensions (L x W)11 x 7.75" (27.9 x 19.7 cm)Overall Dimensions (L x W x H)17 x 11 x 7.75" (43.2 x 27.9 x 19.7 cm)Ship Weight30 lbs (13.6 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Ohaus ISLDMPHDG Incubating Shaker The Ohaus ISLDMPHDG Incubating Light Duty Shaker is designed to in (more)cubate samples from 5° ambient to 65° C depending on the model and are optimized for shaking microplates, deep-well plates, or micro-tubes. The ISLDMPHDG has an 8 lb (3.6 kg) capacity while the Incubating Microplate Shaker can hold up to four standard or deep well plates. Incubating-Cooling Mini Shaker is designed to hold two microplates or two optional modular tube blocks. The ISLDMPHDG features LED displays with touchpad controls. The variable speed microprocessor control provides consistent, uniform shaking action. The microprocessor will display the last setpoint and will restart if power is interrupted. Triple eccentric drive with permanently lubricated ball bearings and maintenance-free brushless DC motor provides reliable service and continuous duty operation. Units slowly increase speed to desired setpoint to avoid splashing. Digital models feature overload protection. Audible and visual signals activate when the system detects obstruction or tray overload. The Ohaus ISLDMPHDG Incubating Shaker is brand-new . Includes: Power Cord Operator's Guide Manufacturer's Documentation Full 2 Year Parts and Labor Warranty Ohaus ISLDMPHDG Incubating Shaker SpecificationsTemperature RangeAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°CSpeed Range100 to 1200 rpmSpeed Accuracy± 2%Timer1 second to 160 hoursOrbit3 mm (0.12")Maximum Weight Capacity4 microplates or 2 micro-tube racksTray MaterialAluminumTray Dimensions (L x W)11 x 7.75" (27.9 x 19.7 cm)Overall Dimensions (L x W x H)17 x 11 x 7.75" (43.2 x 27.9 x 19.7 cm)Ship Weight30 lbs (13.6 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Temperature range: Ambient +5°C to 70°C Temperature accuracy: 0.1°C Maximum load per shelf: 30 kg Ma (more)ximum load total: 80 kg Capacity: 256 L Internal dimensions (WxHxD): 800 x 640 x 500 mm Dimensions (WxHxD): 950 x 920 x 650 mm Weight: 87 kg

Zeiss Axiovert 135 TV w/ XBO 75, Prior Motorised Stage & Control Lab This item was removed from  (more)a university lab where it was surplus to requirements. It is in good cosmetic condition and powers on successfully, with both lamps functioning. All mechanical elements operate smoothly. This microscope has been professionally serviced, the full service report is available on request. No objectives are included. Microscope Components:- Carl Zeiss Axio 3Fl Filter Slider - Filters: HQ, GFO, LP, BP 340, BP 380, FT 425, 500-530, FITC LP - Zeiss C-mount Camera Adapter (Model: 45 61 05) - Zeiss Phase Contrast Nomarski DIC LD Condenser (Model: 45 17 59) - Eyepieces: 2 x E-Pl 10x/20 - Zeiss HAL Lamp House (Model: 44 72 17) - Zeiss Illuminator Lamp House (Model: 44 72 16) Included Accessories and Additional Components: Prior ProScan III- Model: V31XYZ - Serial#: 79693 Prior Control Panel (Joystick)- Model: PS3J100 - Serial#: 80723 Prior Motorised Stage- Model: HK07X135 - Serial#: 1991 - Status: All items successfully communicate, with displays and LEDs fully functional. Includes motorised stage control via joystick, filter switching, and focus control. Does not feature a slide holder. Zeiss XBO 75 Lamp Power Supply- Model: J0470X - Serial#: 1626 - Status: Fully operational with correct cables for microscope connection. The hour clock was reset, showing only 30 minutes of use. Marzhauser Wetzlar Stage- Model: EK 130x85 Axiovert 200 - Serial#: 15042931 - Status: Non-motorized stage.

VACUUBRAND PC 3003 VARIO Select Chemistry Pumping Unit Ultimate Vacuum 1.5 mbar (1.12 Torr) Maximum (more) Pumping Speed 1.65 CFM at 60Hz Number of Heads/Stages 4/4 Features - VACUU·SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory - Automatic boiling point detection and adjustment of the vacuum for short process times - Ideal for evaporation of high-boiling solvents even at low temperatures - Extraordinary diaphragm life for minimum operational and servicing costs - Excellent environmental compatibility through low energy consumption and efficient solvent recovery The PC 3003 VARIO select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. With its high pumping speed and deep ultimate vacuum, this pump is suitable for demanding applications with high boiling point solvents in low temperature conditions. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU·SELECT controller continuously detects the boiling point and automatically adjusts the vacuum process as necessary. And the VARIO control algorithm maintains the desired vacuum level without running the motor faster than necessary. This prevents bumping and foaming, makes the pump whisper quiet, and extends maintenance intervals. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection. Typical applications are all evaporation processes. They can be run fully automatically by the integrated vacuum controller CVC 3000 resulting in both shorter process times and extra sensitivity at the same time. The excellent ultimate vacuum allows even high boiling solvents to evaporate at low temperatures. The VARIO® control ensures high process reliability through prevention of superheating or foaming. It detects boiling pressures of solvents fully automatically and adapts continuously the vacuum conditions to changing process parameters. All this without any need of parameter input or the use of a solvent library. In many other applications - like in local vacuum networks - the VARIO® control offers a significant advantage by supplying always the appropriate pumping speed. The VACUU·BUS® interface facilitates an user-friendly configuration of even complex vacuum installations.INCLUDED: The VACUUBRAND PC 3003 VARIO Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The Invitrogen Novex XCell II Mini-Cell EL9001 Electrophoresis Cuvette is a compact and efficient to (more)ol for separating proteins and nucleic acids. With dimensions of 14.5 cm x 14 cm x 11 cm, and a capacity of 200 mL for the blot module and 600 mL for the buffer chamber, it is ideal for laboratory work that requires processing small samples. Its maximum blot size is 9 cm x 9 cm. Designed to facilitate the electrophoresis of proteins and DNA in acrylamide and agarose gels, as well as for the transfer of proteins to membranes, it is perfect for both research applications and educational purposes, standing out for its ease of use and precision. Maximize the precision of your experiments with the Novex XCell II Mini Cell Electrophoresis Cell El9001, available at Galileo Equipment. Ideal for applications in protein and nucleic acid separation, this compact cell offers exceptional performance in gel electrophoresis. Its innovative design ensures uniform distribution of the electric field and reproducible results. With ease of use and maintenance, it is perfect for research and teaching laboratories. Optimize your biomolecular analysis with the Novex XCell II and discover our exclusive offers to equip your laboratory with the best technology!

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.