New Brunswick Eppendorf Innova 4300 Incubator Shaker Inkubator Schüttler

Thermo Scientific MaxQ 6000 Incubator Shaker SHKE6000-1CE This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up and has been extensively tested. It is in full working order. It is in good cosmetic condition with minor marks. This is the non-refrigerated model of this incubator.

Sanyo MCO-18AC CO2 Incubator This was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition. This unit has been professionally serviced and is in full working order. The service report is available on request.

Heraeus B5060 EK CO2 Incubator This item was removed from a university lab where it was surplus to r (more)equirements. The unit is in good clean condition with intact feet and a door seal and catch in good condition. It powered on, and the controls and digital displays were functioning as intended.The unit powers up and is in good working order (thermometer & CO2 analyser not included). CO2 stabilised at 5%. Specifications: - Internal Dimensions: L 60cm x W 51cm x H 55cm - Five shelves fitted - No UV lamp fitted - Over temperature cut-off working No further testing carried out. Model: B5060 EKSerial No: 8607594

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In video, the animation shows the ST2 refrigerated incubator with the possible shelves available: shelf with compartments; perforated shelf; grill shelf. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Quality, reliable and affordable incubators. Additional technical features: - Powerful and fast refr (more)igeration system - Working temperature from 0°C to 100°C - External structure in oven-painted steel sheet - with antacid epoxy powder - Forced ventilation - Internal chamber completely in stainless steel - Second door in tempered glass - Display resolution 0.1 - RS-485 output - Data management software, cable and USB adapter as standard - Sterilization cycle (160°C for 2.5 hours) Uniformity of temperatures: - at 4°C: 0.7°C - at 37°C: 0.5°C - at 60°C: 1.0°C Temperature stability at: - at 37°C: 0.2°C Time to reach temperature: - at 37°C: 5 minutes - at 44°C: 6 minutes - at 60°C: 6 minutes Quality materials: - External structure in steel sheet painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel - Internal door in tempered glass

Compact design Rotisserie and rocker in one unit Up and over door for accessibility Accurate tempera (more)ture control Advanced safety features Variable speed control The incubator has a stainless steel interior, whilst the door is constructed from a double glazed panel of smoked acrylic and polycarbonate to provide radiation protection. The `up and over’ door mechanism gives excellent access to the incubator.

This GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System was removed from a university (more) lab where it was surplus to requirements. The microscope focus motor/Z-Drive has been removed from this unit. We have removed the microscope focus motor/Z-Drive from this system. It is sold for spares/repairs. Included in the system are; 1x GE IN Cell Analyzer 1000: Dims: L85cm&nbsp;W70cm H70cmThe unit is in good cosmetic condition. When connected up to the power supply we could not hear the unit power on.Inside the unit it appears have been tampered with as there are several cables and connector cables not attached to anything the EARTH cable is also not attached. A circuit board has been removed from the unit. this may explain why we could not get the unit powered up. 1x GE IN Cell Analyser 1000 Kinetic OZ EnabledModel No. 28-4051-29System No. 1316043The unit&nbsp;powers on and is in good cosmetic condition.The fans are working, they can be heard powering up immediately once the unit is powered on. 1x GE IN Cell Analyser 1000 ENDPNT OZ EnabledModel No. 28-4051-28System No. 1358008The unit powers on and is in good cosmetic condition. The unit appears to have been stripped only 1x HP Workstation 6200 PC and 1x&nbsp;MVP Series power supply were still inside it. The Kinetic OZ Enabled unit appears to be complete with an Optigrid light imaging system. We have fitted the GE IN Cell Power supply back into the rack unit where it should be housed. EMKA Keys:Model 2233X2x keys for GE IN Cell Analyser 1000 ENDPNT OZ Enabled2x keys for the GE IN Cell Analyser Kinetic OZ EnabledAll 4 keys are in good cosmetic condition and open and lock both the Kinetic and the ENDPNT units. We did not connect up the GE IN Cell 1000 to the GE 1000 Kinetic OZ Enabled unit as one of the communication cable connections at the back of the rack has come away and will need to be fixed back on. Without this being fixed we do not believe the systems to be aware of each other. 1x Optigrid Light Imaging System:Model QIOPTIQThe unit powers on and is in good cosmetic condition. 1x Xenon ARC Lamp Power supply w 2x keys:Type 6Part No. 56409187The unit powers on and is in good cosmetic condition. The keys do not fit in the barrel well and do not turn. The LCD screen is working and reads clearly. Keys:model No. 901The units are in good cosmetic condition 2x MVP Series Power supplies. ( 1x in each rack unit)Model Nos. MP8-3Q-1L-00Both units power on and are in good cosmetic condition. There is dust around and on both units from general use. 1x Hamilton power supplyModel No. 231352/00The unit powered on and is in good cosmetic condition. 2x APC rack PDUThe units power on and are in good cosmetic condition. 1x GE cO2 Controller:Ser No. 1352436The unit powers on and is in good cosmetic condition. The LCD screen is working and reads clearly. All dials and switches appear responsive to the unit. 2x Hewlett Packard PC's: HP workstation xw6200:The units both power on and&nbsp;are in good cosmetic condition.There is some dust around the units from general use. Programs on PC:•Overlord 2Version 2.1.0.0 •IN Cell Analyser 1000 3.5•IN Cell Analyser 1000 3.6The program is password protected and we could not get past this window to access other parts of the program. 'Shutter Counter 1984048'. 3 x Low Voltage Computer Cables:•28-4060-63 Umbellcal Axis 0734•28-4060-66 0647•28-4060-68 Umbellcal Hamilton 0738 1x Xenon lamp Bulb:Model OSRAM XBO 100W OFRThe box had been opened. We cannot confirm if this lamp has been used. The unit was in good cosmetic condition.

AMS Alliance SmartChem 200 Automated Discrete Analyser Lab This was removed from a university lab wh (more)ere it was surplus to requirements. It powers up and is in good cosmetic condition. When powered up the item performs a self-calibration test that displays the motor in good working order, unable to test further as it requires connection to software.

Labconco 28-Port Manifold, 24.3" w x 10.6" d x 18.3" h, for use with FreeZone Console Freeze Dryers  (more)Two-Tier, type 304 stainless steel manifold 28 neoprene valves with plastic knobs accommodate both 1/2 in. and 3/4 in. adapters For use with 6L, 12L, or 18L FreeZone Console Freeze Dryers Freeze Dryer, glassware, and adapters are required (not included) Includes one latching pin INCLUDED: The Labconco 7202000 28-Port Manifold, 24.3" w x 10.6" d x 18.3" h, for use with FreeZone Console Freeze Dryers includes: - Latching Pin - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station Final Pressure 1 x 10-7 hPa / 7.5  (more)x 10-8 Torr / 1 x 10-7 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 67 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station is a compact, high-performance solution for high vacuum applications. It offers user-friendly operation via a 7-inch touch display, with remote control capabilities through a web server. Designed for reliability and versatility, this system handles a wide range of demanding tasks. Featuring a final pressure of 1 x 10⁻⁷ mbar (7.5 x 10⁻⁸ Torr) and a maximum pumping speed of 1.8 m³/h, it ensures efficient and consistent vacuum generation. Equipped with the Pfeiffer MVP 030-3 diaphragm backing pump and the HiPace 80 Neo turbopump, this unit provides a pumping speed of 67 l/s for nitrogen. It operates quietly, with an emission sound pressure level of ≤50 dB(A), and is suitable for worldwide use with its wide range of input voltages (100-240 V AC). The air-cooled system, compact design, and flexible connection options make it an ideal solution for various high-vacuum needs. INCLUDED: The Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

HX7 H scale&rsquo;s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today &ndash; that&rsquo;s the multifunctionality. That&rsquo;s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices &ndash; thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7&rsquo;s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.