Agilent 1100 Series G1313A Lab

This listing is for a Merck Samplicity G2 Filtration System.The unit is in full working condition an (more)d is ready for immediate release.The Merck Samplicity G2 Filtration System revolutionizes sample preparation for High Performance Liquid Chromatography (HPLC) by offering a vacuum-driven solution that enhances efficiency and user comfort.Key Features:Vacuum-Driven Filtration:Utilizes a vacuum pump to simplify the filtration process, decreasing the manual effort often required in traditional methods.Multi-Sample Filtration:Allows filtration of 1 to 8 samples simultaneously, increasing throughput by up to 35%—perfect for busy labs.User-Friendly Operation:Designed with a simple lever mechanism, enabling quick recovery of clean samples in seconds, which aids in maintaining workflow efficiency.Millex Filter Compatibility:Fully compatible with Millex filters, ensuring reliability and effectiveness in a variety of HPLC applications.Ergonomically Designed:Reduces manual strain compared to syringe filtration, promoting better user health and comfort during repetitive tasks.Applications:HPLC Sample Preparation:Ideal for preparing samples that require filtration before analysis, particularly those that are viscous or contain particulates.Filtration of Challenging Samples:Well-suited for samples that are difficult to filter, such as those with high viscosity or substantial particulate matter, ensuring consistent results.Key Benefits:Increased Efficiency:Streamlines the sample preparation process, significantly cutting down on time and effort, allowing for quicker analysis turnaround.Enhanced Accuracy:Provides reliable filtration, minimizing the risk of contamination or sample loss, crucial for maintaining analytical integrity.Reduced Manual Fatigue:The design alleviates the physical strain associated with manual filtration methods, improving user comfort and lowering injury risk.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This was removed from a university lab where it was surplus to requirements. The unit has not been t (more)ested. It is in good cosmetic condition with marks from use. Part no. 5-2437-00

This Perkin Elmer TurboMatrix 40 Headspace Sampler was removed from a university lab where it was su (more)rplus to requirements. The item is in good cosmetic condition and powered up. When powered up, the item ran a sampling method that displayed the motor in good working order, we are unable to test this item further at our facility.

Samples and applications - Preparation of spreadable creams and soluble powders (tea, coffee, milk)  (more)- Suspensions/emulsions for infusion/injection - Preparation of pharmaceutical ointments and creams - Preparation of (soap, shampoo, conditioner, and creams) - Water analysis - Preparation of pigments, inks and paints - Preparation of liquid crystals for displays - Preparation of biodiesel TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 25 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 100 - 2,500 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 23.6 m/s - Ultimate fineness, emulsions: 1-5 µm - Ultimate fineness, suspensions: 5-25 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

LABORATORY OVEN SLW SMART POL-EKO SLW - FORCED AIR CONVECTION The SLW series laboratory ovens are de (more)signed to reach high temperatures, up to 300 °C. Available from 15 to 1000 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use, just like your smartphone. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - 4,3", clear, full colour touch screen - USB and LAN ports for data transfer - multi-segment time and temperature programs - loop function up to 255 times or endless - adjustable start delay feature - adjustable ramps - recording of min, average and max temperature value for each segment - overview of set and current parameters while operating - operating in temperature or time priority mode - fan speed control in the range of 0 … 100% or 10% … 100% (depending on the chamber capacity) - temperature sensor fail alarm - possibility of temperature calibration by the User - power failure control system (program continued after restoring power) - visual and sound alarm - internal memory for programs and data storage - operating with gloves on - event registry - user manual for direct download QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLW SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLW SMART SERIES The 10 models of the SLW series cover most of your needs: from mini oven to the 1000 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for incubator models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Scale HY10.H for statistic control Scales HY10.PGC series is equipped with module for control of pac (more)ked goods. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after pre-defined quantity of packages (samples) has been controlled. Number of the packages is fixed by scale program depending on product batch size. Scales features 10,1" colourful, graphic touch screen display and full alphanumeric keyboard aiding scale operation and setting control parameters. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scales memory and at the same time it can be printed by printer connected to the scales. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Labconco 7548700 PTFE-Coated Microcentrifuge Tube Rotor PTFE-Coated Aluminum Rotor for CentriVap mic (more)ro IR. Holds twelve 15 ml vials, 20 mm dia. x 70 mm tall. INCLUDED: The Labconco 7548700 PTFE-Coated Microcentrifuge Tube Rotor includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Glassware Set G3 XLVertical condenser for all standard distillations; formaximum evaporatio (more)n performance. The new XL condenser with industry-leading condensing surface of 2,200 cm² - achieve up to 40 % higher evaporation rates. - Glassware set includes one 1,000-ml evaporating flaskand one 1,000-ml receiving flask - Evaporating flasks and vapor tubes which come with astandard NS 29/32 joint size are also available with NS 24/29 groundjoints - Ventilation cap without ground joints for easy handling andgrease-free operation included - A venting valve with refill function is optionally available - Suitable for the automated distillation program Dynamic AUTOaccurate onHei-VAP Expert / Ultimate Control models - Also available upon request: glassware sets for Soxhletextraction and descending condenser system INCLUDED: The Heidolph Glassware Set G3 XL includes: - G3 XL Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Ventilation Cap - Full 3 Year Manufacturer's Warranty